Messages

hi, apparently you are correct, and after looking one up mine is broken. I see you can purchase an aftermarket one. thank you very much, greatly appreciated. 

Hi, these are the tags I removed from my 1969 Z/28. Looking for help to identify the meaning of the skinny removable tag

hi, I appreciate the comment. not referring to the over flow hose clip, that clip is on the outside of the radiator tank, this is a removable clip that clips on the same face as the UH tag but at the bottom of the same side. it is the same shape as the radiator tank face, 1/2 inch wide, bends to form the radiator tank and clips under and into the radiator tank, and has a "O" stamp into it. my car is a 1969 Camaro Z/28 survivor with 37,000 miles on it. I have seen only in picture of other Z/28 radiators that have been restored with there original UH tag and the same tag I am referring to. but can not find any thing about this tag. I will take some pictures of the tags and forward them, thanks again. John     

hi, hoping someone can help me answer what the smaller factory GM tag represents on the bottom of the Harrison radiator located on the CB tank. it is a skinny metal removable tag about 1/2 wide that appears to have a large "O" stamp into it. the metal looks to be the same gauge as the UH tag that is soldered above. I can not find anything on this tag and what it represents. I have removed the original radiator from its home for the last 52 years and need it have a new core installed. any help would be greatly appreciated. thanks, John 

Hi, looking for the owner of a 1969 camaro assembled or close to the 2nd week of June(Norwood). Reason why is, I have a 2nd week of June 1969 z/28. There are 2 items on my car that have been replace since new, the Smog pump, and the extremely hard to find(date code correct) 40669 fuel pump. I happen to have found both over time, fuel pump could be closer! But will do for now. and i want to replace the existing parts with the my findings. So to make sure the I would have the same bolts marking on my bolts as the other survivor car. This is why looking for the same/close to assembly week from Norwood Ohio. Thanks

Hi, I have a 1969 Camaro Z/28 survivor with 36,000 original miles, matching numbers with all it original date code parts except for the fuel pump. My car is a June built car, and I need either a May(EI 40669) or June(FI 40669) Delco fuel pump. I have been searching for sometime now with no look. My question is did they produce pumps every month in 1969, cause it seems like I'm either coming across January(AI) or July(GI) and nothing else.

should of mention its for a 69 Z/28 302 I was referring to.

hey joe, thanks fort the info.

hi, was wondering if someone might what the correct marking should be on the large harmonic balancer bolt, is it L8, or ROCKFORD, 

hi, can anybody tell me where I might find a list of gm bolts with correct head marking for a 69 302, from top to bottom. thanks

hi, I have a set of big block rear leaf springs, this was known as (F/41) heavy duty 5 leaf suspension. have had them for at least 25 years and I would like to sell them, but I do not know what there worth. so any help would be greatly appreciated, thanks.

thanks again, the site was very helpful. and for anyone else 1969 Z/28 7801149 smog pumps only end in a "S"

hi, thanks for getting back to me, yes I understand that the letter "Y" stood for pressure relief valve installed. all the smog pumps I have seen for 1969 Z/28 end in the letter "S". even in Jerry MacNiesh book the pump illustrated end in the date code with the letter "S" for Saginaw plant. so like I ask does anybody know if they know or seen a smog pump for 1969 Z/28 with a date code ending in the letter "Y"

hi, can anybody tell me if they ever installed "Y" 7801149 smog pumps on the 1969 Camaro Z/28. and as far as a May assembled block. what do I have as far as time prier to assembly for a smog pump in 1969?

hi, can anybody tell me if they ever installed "Y" 7801149 smog pumps on the 1969 Camaro Z/28. and as far as a may assembled block goes what do I have as far as time prier to assembly?