Text only | Text with Images

CRG Discussion Forum

Camaro Research Group Discussion => Decoding/Numbers => Topic started by: x66 714 on April 20, 2012, 07:25:00 PM

Title: V1226DZ block
Post by: x66 714 on April 20, 2012, 07:25:00 PM
A block with V1226DZ should have the partial vin on that same pad...correct?.....Joe
Title: Re: V1226DZ block
Post by: 1968RSZ28 on April 20, 2012, 08:16:47 PM
The Norwood plant stamped the VIN on the engine pad on early cars and moved the stamp by the oil filter in the December 68 timeframe. Los Angeles was not as consistent and the VIN stamp location varied during the year.

Paul
Title: Re: V1226DZ block
Post by: x66 714 on April 20, 2012, 10:03:47 PM
I looked at both areas of the block where the vin should be & no sign of anything ever being in either place. The block is perfectly clean. I guess I need to take a picture of what stamps are there..Joe
Title: Re: V1226DZ block
Post by: 1968RSZ28 on April 20, 2012, 10:53:46 PM
Joe,

Post a picture of the engine assembly stamp and Kurt will let you know if it's original.

Paul
Title: Re: V1226DZ block
Post by: mickeystoys69RSSS on April 22, 2012, 01:55:51 PM
Perfectly clean sounds like it my have been decked with the block plant/date/model code restamped.
Title: Re: V1226DZ block
Post by: z10kl on April 22, 2012, 05:13:23 PM
Sometimes real hard to see down by oil filter. Especially if still had paint on it.
Title: Re: V1226DZ block
Post by: x66 714 on April 23, 2012, 07:21:36 PM
Here's a picture of the stamps...Joe
Title: Re: V1226DZ block
Post by: KurtS on April 23, 2012, 09:52:14 PM
That's an original stamping.
Text only | Text with Images