Print Page - Sealant between the heater box and the firewall?

Title: Sealant between the heater box and the firewall?
Post by: BowtieSweden on July 19, 2011, 01:41:11 PM

What type of sealant is used between the heater box and the firewall?

Thanks,
Gus

Title: Re: Sealant between the heater box and the firewall?
Post by: JohnZ on July 20, 2011, 04:17:59 PM

Quote from: BowtieSweden on July 19, 2011, 01:41:11 PM
What type of sealant is used between the heater box and the firewall?

Thanks,
Gus

None on the inside box ( the dash mat becomes the gasket between the inner box and the firewall). The engine side blower housing had a bead of neoprene or vinyl plastisol sealer applied in its groove before it was attached to the firewall.

Title: Re: Sealant between the heater box and the firewall?
Post by: BowtieSweden on July 21, 2011, 11:10:19 AM

Thanks,

That was where I meant, in the engine compartment.
Any suggestions for products that are available today?

/ Gus

Title: Re: Sealant between the heater box and the firewall?
Post by: firstgenaddict on July 22, 2011, 04:08:44 PM

Almost any Black Body Sealer in a tube applied using a caulking gun. Ask at the Local Paint suppliers

Title: Re: Sealant between the heater box and the firewall?
Post by: 68rs327conv on July 22, 2011, 08:23:49 PM

I planned on using the 3m strip caulk when I put mine back on

Mike

CRG Discussion Forum

Camaro Research Group Discussion => Restoration => Topic started by: BowtieSweden on July 19, 2011, 01:41:11 PM