Text only | Text with Images

CRG Discussion Forum

Camaro Research Group Discussion => Restoration => Topic started by: malley67 on June 27, 2010, 11:57:13 PM

Title: what is the correct type of oil filler tube cap ? "S rivet" or "engine oil fill"
Post by: malley67 on June 27, 2010, 11:57:13 PM
hi guys,

what is the correct type of oil filler tube cap that came out on a 1968 327/210 hp ? is it the "S rivet" type or the type that says "engine oil fill" on top ? please remember that this is for the oil filler tube, not the one for the valve covers.

thanks heaps guys,

cheers,

rohan  ???
Title: Re: what is the correct type of oil filler tube cap ? "S rivet" or "engine oil fill"
Post by: Marty on June 30, 2010, 07:09:45 PM
I took one off a 68 Chevelle 2-BBL engine built in Tonawanda years ago. It was stamped ENGINE OIL FILL AC-FC60.

Hope this helps.

Martin
Title: Re: what is the correct type of oil filler tube cap ? "S rivet" or "engine oil fill"
Post by: Pacecarjeff on June 30, 2010, 09:28:53 PM
FC60 was used a bit later.
The FC2 was used in 68.
However both types FC or S would be correct, but the FC2 oil cap is much more common for 68.
Text only | Text with Images