Text only | Text with Images

CRG Discussion Forum

Camaro Research Group Discussion => Originality => Topic started by: KevinK on October 07, 2007, 05:43:40 AM

Title: Quadrajet - air cleaner "SPACER" originally used?
Post by: KevinK on October 07, 2007, 05:43:40 AM
   
  I recently purchased a repro air cleaner assembly where the BASE hits on areas of the carb (QJet) before it seats completely to the round gasket. The thread over on Team Camaro ( http://www.camaros.net/forums/showthread.php?t=116939 ) seems to indicate a "spacer" was (should be?) used under the base?
  I was/am not aware of this, ...and am curious if there was indeed a spacer and/or if so, does anyone have a photo of an original? ...if indeed one was used.
 
  Thanks,
              Kevin
Title: Re: Quadrajet - air cleaner "SPACER" originally used?
Post by: Mark on October 07, 2007, 10:18:03 AM
No spacer in the AIM only a gasket.  L34/55 and L78 all use the same base so it probably just an incorrectly repro'ed part.  Guess we need pictures of original BB air cleaners and the repro versions.
Title: Re: Quadrajet - air cleaner "SPACER" originally used?
Post by: KevinK on October 08, 2007, 08:56:43 AM
...Thanks Mark..., I'm going to get some photos of the repro posted, ...showing where I needed to 'modifiy' it to get it to fit. I would love to see pics of the bottom side of an original...
 
  Kevin
Title: Re: Quadrajet - air cleaner "SPACER" originally used?
Post by: 9T4Z on October 12, 2007, 03:42:14 PM
I can't take credit for these pics.... saw them a while back comparing chevelle original and repop... so here are the original pics

good luck
Text only | Text with Images