Does the "guts" from the gauge pod clock in a 67 fit the single U35 clock?
(http://www.rickscamaros.com/online-store/scstore/graphics/cg-50.jpg)
Is the U35 "electric clock" cup the same for floor mounted and console mounted?
I found a clock that seller says is a floor mounted clock and as you can see below I "desperately" need to replace the "thing" on my Yutivo Camaro console.
(http://www.69pace.com/images/1967Yutivo/U35.jpg)
Claus, the clocks are different between the floor mounted and the console gauge version. Also different between 67 and 68. Here's the breakdown:
1967 floor mounted (without gauges) - 987035
1967 floor mounted (with gauges) - 3901613
1968 floor mounted (without gauges) - 3921410
That being said, I have no idea if any of these interchange into the "non-gauge" clock pod you have.
Ed
Thanks a lot Ed, I have asked seller for a part number.
I am sure its a floor mounted clock without gauges, see picture.
(http://www.69pace.com/images/Paint/Interior/1967_732brightbluecostum/pace/clock.jpg)
67 or 68?
That looks to be a 68 floor mounted clock (without gauges). The 67 didn't have the center circle.
Ed
Thanks again Ed.
I might settle for this 68 clock, its hard to find them.
Quote from: bertfam on September 09, 2007, 09:49:57 PM
That looks to be a 68 floor mounted clock (without gauges). The 67 didn't have the center circle.
Ed
So I take it this is a 67 clock:
(http://www.69pace.com/images/Paint/Interior/1967_732brightbluecostum/pace/c29e_1.jpg)
Correct, but I'm not sure if that's the guage clock or the non-gauge.
Ed
I am "suspecting" its a gauge clock, wonder if it will fit in the U35 cup.