Text only | Text with Images

CRG Discussion Forum

Camaro Research Group Discussion => General Discussion => Topic started by: Johnyoder on January 03, 2006, 01:23:07 PM

Title: Speedo cable
Post by: Johnyoder on January 03, 2006, 01:23:07 PM
I am new to this site found alot of great information I have never seen before. 

I was woundering if anyone had any pictures of the speedo cable locations for the autos and the manuals in 69.

Thanks.

John
Title: Re: Speedo cable
Post by: JohnZ on January 04, 2006, 01:31:25 PM
Everything except Muncie 4-speeds had the speedo cable hole outboard of the steering column, just below and inboard of the fuse block; Muncie 4-speeds had the cable hole inboard of the steering column, just below and slightly inboard of the wiper motor. The standard hole near the fuse block was in all cars, and had a plug installed in it on Muncie 4-speed cars. Photo below of the standard hole near the fuse block.  :)
Title: Re: Speedo cable
Post by: Johnyoder on January 04, 2006, 01:40:26 PM
Thanks for the picture and clearing that up for me.
Title: Re: Speedo cable
Post by: nuch_ss396 on January 04, 2006, 10:03:42 PM
John,

Happen to have an image of what an original plug for the standard speedo-cable hole would look like?

Steve
Title: Re: Speedo cable
Post by: JohnZ on January 05, 2006, 11:43:21 AM
Don't have a photo, but it's a black plastic Caplug, installed from the engine side of the firewall.  :)
Title: Re: Speedo cable
Post by: JKZ27 on January 05, 2006, 10:14:45 PM
The Muncie 3-speed cable runs the same as the 4-speed, inboard from the steering column.

John
Title: Re: Speedo cable
Post by: RamAirDave on January 06, 2006, 01:01:11 AM
Steve,

If your still interested in a pic of the plug, I can take one and post it here.

dave
Title: Re: Speedo cable
Post by: nuch_ss396 on February 10, 2006, 12:24:39 AM
Yes Dave,

I'd like to see an original plug.

Steve
Text only | Text with Images