Text only | Text with Images

CRG Discussion Forum

Camaro Research Group Discussion => Originality => Topic started by: hotrod68 on June 05, 2007, 10:50:33 PM

Title: '68 firewall
Post by: hotrod68 on June 05, 2007, 10:50:33 PM
'69CONVRAT brought to mind a question I also have--did the automatic cars not have the hole punched in the firewall for the clutch pedal cross-shaft pushrod and boot? Or was the hole there on all models and covered by a factory plate if the car was automatic? Velly intelesting.... :-*
Title: Re: '68 firewall
Post by: JohnZ on June 06, 2007, 01:44:04 PM
Dunno about '68, but 69's all had the clutch pushrod seal hole pre-pierced in all firewall panels; the cover, seal, and screws for it are shown in the M35 section.
Title: Re: '68 firewall
Post by: JKZ27 on June 07, 2007, 05:58:20 PM
My 68 327/PG has the cover plate with 2 screws.

John
Title: Re: '68 firewall
Post by: sebastien on June 07, 2007, 11:56:52 PM
cover plate w/screws on mine too.
Title: Re: '68 firewall
Post by: lakeholme on June 08, 2007, 06:26:35 PM
Mine, three...
Title: Re: '68 firewall
Post by: hotrod68 on June 08, 2007, 10:28:35 PM
Thanks, guys. Always pays to ask those in the know.
Text only | Text with Images