Print Page - What’s the name ?

Title: What’s the name ?
Post by: philip on April 28, 2026, 04:41:06 AM

Found this picture , it's a 327 210hp from a 67 , what the name of the cable that limits the mouvement of the engine attached to the exhaust manifold ?
And when they appear ? Witch models?

(https://i.postimg.cc/SKtzXzBS/FB-IMG-1777368875677.jpg)

Title: Re: What’s the name ?
Post by: boomer632 on April 28, 2026, 06:51:12 AM

Im thinking it might be..

GM 330365 Engine Lift Stop Cable for non AC small blocks. I think there was another kit for BB application and cars with AC as well.

1967-69 302 307 327 350 Camaro / Nova

Title: Re: What’s the name ?
Post by: x66 714 on April 28, 2026, 07:16:38 AM

I think they appeared in 1971 or 1972 as a engine mount safety recall. Somebody will know exactly when. I always tell people to take them off during restoration because most are people restoring to day one....some to day 2....Joe

Title: Re: What’s the name ?
Post by: fsc66 on April 28, 2026, 10:12:39 AM

See attached

Title: Re: What’s the name ?
Post by: bcmiller on April 28, 2026, 10:15:48 AM

I would never have one of those cables on any of my cars.

Title: Re: What’s the name ?
Post by: David K on April 28, 2026, 10:59:39 AM

These were a cheap fix for a much bigger problem. I know folks who have had the throttle stick wide open and not return due to a failed engine mount.

Title: Re: What’s the name ?
Post by: philip on April 28, 2026, 02:14:16 PM

When i buy my car in 88 , i have experimented the problem , both engine mount where separated and the engine collide the hood.
No recall in france for that..... ;)

CRG Discussion Forum

Camaro Research Group Discussion => Originality => Topic started by: philip on April 28, 2026, 04:41:06 AM