Text only | Text with Images

CRG Discussion Forum

Camaro Research Group Discussion => Maintenance => Topic started by: JGraft on November 06, 2022, 02:21:38 PM

Title: Bell Housing PN 3998621 removal without engine removal
Post by: JGraft on November 06, 2022, 02:21:38 PM
Has anyone been able to remove and reinstall a 621 bell housing in a 1968 camaro without removing the engine? From what I've read it seems it can be done but wanted to confirm with the experts. I plan to replace transmission, clutch, pressure plate, throwout bearing, pilot bushing, and flywheel as well, so I need to be able to get the bell housing out/into the vehicle.
Title: Re: Bell Housing PN 3998621 removal without engine removal
Post by: bertfam on November 06, 2022, 04:12:43 PM
Yes, not a problem. I've done it MANY times!

Ed
Title: Re: Bell Housing PN 3998621 removal without engine removal
Post by: MO on November 06, 2022, 11:54:06 PM
Yes, easily.
Title: Re: Bell Housing PN 3998621 removal without engine removal
Post by: David K on November 07, 2022, 01:02:27 PM
The engine does not need to be removed for any transmission/related parts removal....as stated above.
Title: Re: Bell Housing PN 3998621 removal without engine removal
Post by: JGraft on November 08, 2022, 11:21:33 AM
Thankyou experts for responding, should make this job much easier! :)
Title: Re: Bell Housing PN 3998621 removal without engine removal
Post by: Sauron327 on November 08, 2022, 12:01:41 PM
I would check your bellhousing alignment. Parallel and concentric. I stock all the shims and dial indicators to do so.
Title: Re: Bell Housing PN 3998621 removal without engine removal
Post by: camaronut on November 09, 2022, 02:09:20 PM
Quote from: Sauron327 on November 08, 2022, 12:01:41 PM
I would check your bellhousing alignment. Parallel and concentric. I stock all the shims and dial indicators to do so.

VERY IMPORTANT!!!!!!
Text only | Text with Images