Text only | Text with Images

CRG Discussion Forum

Camaro Research Group Discussion => General Discussion => Topic started by: 67conv6cyl on September 24, 2022, 05:31:03 PM

Title: Wiper arms
Post by: 67conv6cyl on September 24, 2022, 05:31:03 PM
Dose anyone know the correct part numbers for convertible wiper arms.
I have a parts book however no part numbers on this item.

I just want to see if my 67 wiper arms are the correct originals.
Title: Re: Wiper arms
Post by: 67conv6cyl on September 24, 2022, 05:40:59 PM
Here is a. Picture of my wiper arm
Title: Re: Wiper arms
Post by: Petes L48 on September 24, 2022, 08:42:51 PM
It's UPC 1 Sheet A3 in the AIM.

3916687, or 3916688 is the optional for a vert.  I assume the Trico was primary and Anco was the optional

FWIW I also saw 3893839 Trico listed in a 1966 parts book.
Title: Re: Wiper arms
Post by: rare396bronze on September 24, 2022, 09:44:20 PM
1969 Chevrolet parts book says 3916688  trico 67-68 camaro convertible! Hope this helps. They are shorter than the coupe!
Title: Re: Wiper arms
Post by: 67conv6cyl on September 25, 2022, 02:16:45 PM
So the wiper arm I posted is not correct for a 67 convertible?
Title: Re: Wiper arms
Post by: rare396bronze on September 25, 2022, 02:27:25 PM
I would take measurement of the arm and post it in a picture off it. I don't think the the gm part is stamped on the arm!
Title: Re: Wiper arms
Post by: Petes L48 on September 25, 2022, 02:51:42 PM
Your picture showed Patent numbers, not part numbers.  I don't recall the part number being stamped or cast on the arms either.
Title: Re: Wiper arms
Post by: 67conv6cyl on September 25, 2022, 09:07:01 PM
Hear is picture of the complete arm
Title: Re: Wiper arms
Post by: rare396bronze on September 25, 2022, 10:14:18 PM
Looks right just checked my convertible. With my blade off 13 1/4 long fully pushed down. All the numbers on the arm matches mine.
Title: Re: Wiper arms
Post by: 169INDY on September 25, 2022, 10:23:18 PM
Are all of the Short Arms stamped "CONV" ??
My 69's are.

Jim
Title: Re: Wiper arms
Post by: dannystarr on September 26, 2022, 11:17:35 PM
I know the convertible arm is 1" shorter than hard top. At least in '67 & '68. Danny
Title: Re: Wiper arms
Post by: Sauron327 on September 27, 2022, 09:38:20 AM
Quote from: dannystarr on September 26, 2022, 11:17:35 PM
I know the convertible arm is 1" shorter than hard top. At least in '67 & '68. Danny
69 too. Restored all three years and sold off all my convertible wiper arm stock. Ready to scrap my hardtop ones. Tired of saving inventory.
Title: Re: Wiper arms
Post by: rare396bronze on September 27, 2022, 09:49:40 AM
Don't see conv stamped on my 68 arms or a spare set i have. Only thing stamped on them is what is pictured on 67conv6cyl!
Title: Re: Wiper arms
Post by: Pacecar on September 27, 2022, 09:56:31 AM
67 Arms should be brighter than 68 and 69, noticeable at the knuckle
Title: Re: Wiper arms
Post by: Petes L48 on September 27, 2022, 01:27:11 PM
Didn't see a CONV on my 67 arms either, but was using a flashlight and small mirror, while staying away from the paint.   
Title: Re: Wiper arms
Post by: 67conv6cyl on September 28, 2022, 06:06:51 PM
Quote from: Pacecar on September 27, 2022, 09:56:31 AM
67 Arms should be brighter than 68 and 69, noticeable at the knuckle

The knuckle is brighter chrome on the ones that I have....however I don't see a convertible stamp anywhere. These were on my 67 when I bought car over 30 years ago.
Text only | Text with Images