CRG Discussion Forum

Camaro Research Group Discussion => General Discussion => Topic started by: LZDICK on April 18, 2022, 11:34:32 AM

Title: Heater Core
Post by: LZDICK on April 18, 2022, 11:34:32 AM
New to this forum; looking forward to learning more about 1st Gen. Camaros.

I have a heater core question:  Which 1st Gen. Camaro takes a 2" (thick) heater core?  I recall '67-68 differed from '69; not sure which is which?  I believe the other was thicker; perhaps 2.5".  Reason:  I have a nice copper 2" heater core that I (hopefully) do not need.

Thanks CRG
Title: Re: Heater Core
Post by: rich69rs on April 18, 2022, 03:39:36 PM
Pictures of my original heater core from my 01C Norwood '69 RS.

Core is 2" thick,'.
Title: Re: Heater Core
Post by: Quickkiwi on April 24, 2022, 04:14:11 PM
Just removed heater core from my 68.

I always believed 67-68 were 2.5" and the 69 was 2".

This surprised me being only 2", (# 68C) perhaps being a July 68 build it got a change that went into the 69 model.





Title: Re: Heater Core
Post by: cook_dw on April 25, 2022, 09:33:40 PM
67 M

Title: Re: Heater Core
Post by: cook_dw on April 25, 2022, 09:34:28 PM
68 E

Idk why the photos are upside down.  On my phone so I can't fix until I'm on a pc.
Title: Re: Heater Core
Post by: Quickkiwi on April 25, 2022, 11:59:47 PM

Found some good information, 2.5" was superseded in March 68 by the 2". Same case was used right through just different clips and pipe seal.

3015134 - Case - 1968-69 Camaro (except 396 engine) without AC
*use CI Part # 3013319 for 1968 Early Builds with 2-1/2" core
*use CI Part # 3011432 for 1968 Late Builds with 2" core (supersession #3016842)
*use CI Part # 3011432 for 1969 models

3015141 - Case - 1968-69 Camaro (with 396 engine) without AC
*use CI Part # 3011477 for 1968 models
*use CI Part # 3018864 for 1969 models

3015606 - Case - 1968 Camaro with AC
*use CI Part # 3009917 for 1968 models

3018763 - Case - 1969 Camaro with AC
*use CI Part # 3018489 for 1969 models



Title: Re: Heater Core
Post by: cook_dw on April 26, 2022, 07:25:51 AM
Anyone have any clips for the 2.5" heater core?  I am in need of some or I will have to make my own.  Where did you come across the info? Thanks. 
Title: Re: Heater Core
Post by: Quickkiwi on April 26, 2022, 08:11:28 PM
Quote from: cook_dw on April 26, 2022, 07:25:51 AM
Anyone have any clips for the 2.5" heater core?  I am in need of some or I will have to make my own.  Where did you come across the info? Thanks.

I got the information from the following link on another forum. I cant find information on the clip for the 2.5". I could only find a 2.5" core here in NZ so I will use that to replace my 2". I will update how I get on with installing. I'm thinking I will have to make clips also.

Link
https://camaroforums.com/forum/67-69-general-43/heater-core-84014/page2/

Hope link is allowed, If not moderator please remove.