Text only | Text with Images

CRG Discussion Forum

Camaro Research Group Discussion => Maintenance => Topic started by: MD396 on April 04, 2007, 08:08:58 PM

Title: Valve lash adjustment 69 Z28
Post by: MD396 on April 04, 2007, 08:08:58 PM
What is the factory valve lash for the intake and exhaust valves on my 1969 Z28 with the original motor and solid lifter cam?

Thanks in advance,

David
Title: Re: Valve lash adjustment 69 Z28
Post by: Gramps69Z on April 04, 2007, 09:42:04 PM
David, look at the 302 valve adjustment article under CRG reports.  The information at the top header of this site is very helpful.


Fireman John
Title: Re: Valve lash adjustment 69 Z28
Post by: 1968RSZ28 on April 04, 2007, 11:06:27 PM
Here it is:

http://www.camaros.org/302valves.shtml

Paul
Title: Re: Valve lash adjustment 69 Z28
Post by: MD396 on April 05, 2007, 10:10:14 AM
Got it. Thank you for that link.

David
Title: Re: Valve lash adjustment 69 Z28
Post by: scotthvy on June 02, 2007, 07:41:40 PM
I use a timing tape that does the same thing I actually had one balancer marked off to match the tape make the process much faster two revolutions and your done.
Text only | Text with Images