Text only | Text with Images

CRG Discussion Forum

Camaro Research Group Discussion => Maintenance => Topic started by: TonyS on April 12, 2020, 08:21:27 PM

Title: 1969 ignition coil
Post by: TonyS on April 12, 2020, 08:21:27 PM
Anyone have a source for a coil for the cowl hood application? I hope this is the #270? I have one on order from Ecklers, but maybe another week or more before it ships, since they are currently out of stock.

What is the difference in the cowl hood/non-cowl hood coils?

Thanks.
Title: Re: 1969 ignition coil
Post by: william on April 12, 2020, 10:17:48 PM
Z/28 and SS350 used the 270 coil assembly to move the coil away from the air cleaner. 396/427 didn't require it.

The mounting bracket is the same one used on the '65-'67 275/327.
Title: Re: 1969 ignition coil
Post by: TonyS on April 12, 2020, 10:30:16 PM
So the bracket is different, but the coil should be the same physical size as a flat hood car? This is what I think, just want to be sure.

Thanks.
Title: Re: 1969 ignition coil
Post by: KurtS on April 13, 2020, 12:50:59 AM
Yes.
Title: Re: 1969 ignition coil
Post by: william on April 13, 2020, 02:15:10 PM
Some service replacement coils are larger in diameter than OE and had ink-stamped characters.

OE was 2.125" dia with stamped, raised characters.
Title: Re: 1969 ignition coil
Post by: TonyS on April 13, 2020, 03:50:46 PM
Thanks gents.
Title: Re: 1969 ignition coil
Post by: janobyte on April 14, 2020, 08:12:57 PM
Try Long Island Corvette Supply if your coil is still on b/o.
Title: Re: 1969 ignition coil
Post by: janobyte on April 14, 2020, 08:20:38 PM
Disreguard, 63-67. Where I picked up my 202 coil.
Sorry, bad info.
Title: Re: 1969 ignition coil
Post by: hugrz28 on April 15, 2020, 12:09:16 AM
I have several, contact me if you are interested.

Dan
Text only | Text with Images