I started a list of items that need yellow zinc for the 69. Am I missing anything? Thank you, Joe
power brake booster
caliper mounts
smog check valves
master cyl lid
jack mast
bracket for valve below master cyl
diverter valve?
Rear seat belt retainer bolts that mount under the rear seat.
I think the jack mast can be with and without yellow zinc plating.
Mike
R/S tank vac switch mount.
Turn signal housing.
brake line rubber hose retainers.
Rad drain petcock.
Rear bumper lice plate light housing
Trunk latch activating pawl (??)
sway bar end link spacers
Heater hose corbin spring hose clamps (??)
more to follow (??)
Jim
Quote from: Mike S on August 18, 2019, 08:01:02 PM
Rear seat belt retainer bolts that mount under the rear seat.
I think the jack mast can be with and without yellow zinc plating.
Mike
The front inboard bolts are yellow. Outside one are chrome. At least that's the way they were on my car. thanks... Joe
Quote from: 169INDY on August 18, 2019, 08:31:39 PM
R/S tank vac switch mount.
Turn signal housing.
brake line rubber hose retainers.
Rad drain petcock.
Rear bumper lice plate light housing
Trunk latch activating pawl (??)
sway bar end link spacers
Heater hose corbin spring hose clamps (??)
more to follow (??)
Jim
I'll look at some of those. Not an r/s. Forgot about t/s light & lic light. Brake line retainer I will examine. My latch was a combo of paint & spatter..Thank you, Joe
Quote from: x66 714 on August 18, 2019, 09:14:47 PM
Quote from: Mike S on August 18, 2019, 08:01:02 PM
Rear seat belt retainer bolts that mount under the rear seat.
I think the jack mast can be with and without yellow zinc plating.
Mike
The front inboard bolts are yellow. Outside one are chrome. At least that's the way they were on my car. thanks... Joe
I assume you're talking about 69? I just checked both my 67's and the front seatbelt bolts where chrome....one for the lap belt and one for retractor. I figured being they were visible is why they were chrome. Maybe 69 it was different?
Pretty much other items mentioned already sounds accurate. Drum brake components come to mind but I'm not sure which parts, if any.
Mike
"Drum brake components come to mind but I'm not sure which parts, if any."
Yes, the anchor pin washer is Zinc Dichromate, it is the funky spacer with the ears. (For lack of a better description)
Jim
Joe,
I cannot remember if your car is a 4 speed. If it is, the 1st, 2nd and 3rd, 4th levers on a Muncie are yellow zinc.
Nothing on the sway bar link is yellow zinc.
- Warren
Quote from: WorkinProgress on August 19, 2019, 12:10:28 PM
Joe,
I cannot remember if your car is a 4 speed. If it is, the 1st, 2nd and 3rd, 4th levers on a Muncie are yellow zinc.
Nothing on the sway bar link is yellow zinc.
- Warren
TH400 Warren
Quote from: WorkinProgress on August 19, 2019, 12:10:28 PM
Joe,
Nothing on the sway bar link is yellow zinc.
- Warren
It is very common practice to restore the 69 camaro orignal end link spacers to the zinc dichromate finish as it was originally.
photo of April 1969 build LOS car well preserved by grease revealing the "yellow Zinc"
JIM
JIM
The radiator petcock is brass and not yellow zinc plated. Add to the list aluminum intake manifold carb mounting studs.
Quote from: Edgemontvillage on August 19, 2019, 08:24:53 PM
The radiator petcock is brass and not yellow zinc plated. Add to the list aluminum intake manifold carb mounting studs.
The Nut is brass, but the stem, barrel & wing nut are steel.
Detailed pic attached.
JIM
I want to say thank you to everybody for their input....Joe