Print Page - Engine / Frame Grounding

Title: Engine / Frame Grounding
Post by: Mr 396 on August 30, 2018, 08:19:44 PM

What if any engine to body or frame to body grounging is needed with a radio/heater delete 69? Just not completely sure after looking the service manual over.

Title: Re: Engine / Frame Grounding
Post by: joesauer on August 30, 2018, 10:37:07 PM

Put in all three straps shown in the manual.

Title: Re: Engine / Frame Grounding
Post by: blackss69 on August 31, 2018, 07:22:24 AM

I have an original owner no radio 69 Camaro 396/375. There are no ground straps from valve covers to body and from body to subframe. I ordered it without a radio so it is factory.

Title: Re: Engine / Frame Grounding
Post by: Mr 396 on August 31, 2018, 09:07:43 AM

Thanks for the info. I am still having a ground issue and was hoping this would solve it. Read on another site that engine/body/frame grounding was important as well as grounding the voltage regulator. Any comments are greatly appreciated. Thanks.

Title: Re: Engine / Frame Grounding
Post by: joesauer on August 31, 2018, 10:36:46 AM

Put in all the factory specified grounding......it's not just for the radio.

Title: Re: Engine / Frame Grounding
Post by: Mr 396 on August 31, 2018, 02:53:58 PM

Thanks. I'll try that as I am having troubles with the alternator light staying on and have tried different ones.

CRG Discussion Forum

Camaro Research Group Discussion => Restoration => Topic started by: Mr 396 on August 30, 2018, 08:19:44 PM