Text only | Text with Images

CRG Discussion Forum

Camaro Research Group Discussion => General Discussion => Topic started by: sixt9x33rs on August 24, 2013, 10:19:58 PM

Title: Front coil springs
Post by: sixt9x33rs on August 24, 2013, 10:19:58 PM
I have a set of relatively new front springs and I don't know what they were built for? A small block or big block? Is there any way to tell?

Thanks

Lawrence
Title: Re: Front coil springs
Post by: bertfam on August 24, 2013, 10:41:14 PM
Are they GM or aftermarket? If GM, is the tag still on them?

Ed
Title: Re: Front coil springs
Post by: sixt9x33rs on August 24, 2013, 11:05:18 PM
Ed, I am guessing aftermarket. There are no tags.
Title: Re: Front coil springs
Post by: jvb6648 on August 25, 2013, 10:09:45 PM
I replaced the springs that were in my small block when I bought it. Pretty sure those were big block springs. That's 40 years ago. They had a free height of 16.5 inches. The small block springs I just replaced them with are 14.98 inches. I know spring dia. matters but hope this helps.

Jim
Title: Re: Front coil springs
Post by: Mark on August 26, 2013, 12:14:39 PM
look at the very ends of the spring coils, if they are MOOG springs there will be a 4 digit number stamped on the coil, usually very small and hard to see but they are there, maybe 2" from the end of the coil.
Title: Re: Front coil springs
Post by: firstgenaddict on August 27, 2013, 06:52:45 AM
Like this these numbers are on the original Z28 springs... btw Lawrence I have a set of front springs with the last number of 25 they are listed for BB conv with about 200# extra weight.

(https://lh5.googleusercontent.com/-1g9wHhzzLP4/UODyBNLHMAI/AAAAAAAAA3I/PfDn5Ef3B84/w1103-h827-no/05.02.10+001.jpg)
Title: Re: Front coil springs
Post by: sixt9x33rs on August 31, 2013, 08:26:53 AM
Thanks guys I will check for the numbers. James I may want to buy those springs from you if you would like to sell them.
Text only | Text with Images