Text only | Text with Images

CRG Discussion Forum

Camaro Research Group Discussion => General Discussion => Topic started by: z28rich on October 22, 2012, 12:01:44 PM

Title: can I use my stock body mounting bolts with poly bushings
Post by: z28rich on October 22, 2012, 12:01:44 PM
car is a 69
Title: Re: can I use my stock body mounting bolts with poly bushings
Post by: 69Z28-RS on October 22, 2012, 12:46:05 PM
Are the poly bushings thinner or thicker?   Are your original bolts/washers in good shape?
Title: Re: can I use my stock body mounting bolts with poly bushings
Post by: 77thor on October 22, 2012, 03:07:10 PM
I've never seen original bolts that were in good enough shape to reuse.
Title: Re: can I use my stock body mounting bolts with poly bushings
Post by: hotrod68 on October 27, 2012, 10:10:20 PM
I used my original bolts and washers with urethane bushings and have had no problems whatsoever. Mine is a Southern car and they were in excellent shape. But--new bolts are not that expensive if you choose to go that route. Good luck.
Text only | Text with Images