Author Topic: Need help identifying distributor shaft for 1111467 distributor  (Read 3946 times)

Ramjett54

  • Member
  • ***
  • Posts: 125
  • Decatur Alabama
    • View Profile
Hey Guys I'm trying to put my 1111467 distributor back original I have a 532 points cam but I need to know which shaft was correct and what number it would have stamped on it or other identifying markings.
Also I have numerous centrifical weights how do you identify the correct ones for  the z28 shaft, points cam combination. According to gmwiki.com sbc used several different numbers, all the ones I have seem to all have the same profile. Were there different profiles or different weights?

tmodel66

  • Hero Member
  • *****
  • Posts: 1212
    • View Profile
Re: Need help identifying distributor shaft for 1111467 distributor
« Reply #1 on: August 04, 2012, 11:33:26 PM »
I think the weights were all the same. You would get your advance to change with the different stiffness of springs. Mind you I have seen and ground counterweights to change the advance but not without a machine to tune it with.
Daniel  
'69 SS 350/4 speed  Fathom Green--POP

z28z11

  • Hero Member
  • *****
  • Posts: 1853
    • View Profile
Re: Need help identifying distributor shaft for 1111467 distributor
« Reply #2 on: August 06, 2012, 01:09:56 AM »
Sorry it took a while to respond to this - I recently took my 467 apart (from the condition and appearance I believe I'm the first to do this). It has the 532 cam, and the shaft is marked "48" under the plate on the end of the shaft (see grainy pic). It does not correspond to the listed part number in my parts manual, which should be the same for all 3 years of 302's - 1969762. Since you've got my curiousity started, I'm going to look at my 480 and 499 shafts to see what marking is on them.

P.S. I forgot to add the springs and weights part numbers - 1969107 springs for 67-68 302's. weights were 2 possibilities - 1880902 (67-68 Camaro exc. 327,4BC 350) or 1965843 (68 Camaro w/ Sp. H/Per, 327, also 66-70 350 w/A.I.R., pass 396, 68 Chevy Camaro 350 exc. PG). If I can find any markings on the weights, I'll post them too -
1968 Z28 M21/U17 BRG/W 1967 Chevy ll Nova SS 
1969 Z28 X77/M20/VE3 LeMans/W
1969 L78 X66/N66 Cortez/BVT
1969 Z11 L48/M35/C60/C06  1949 3100 5wd 235/6

Ramjett54

  • Member
  • ***
  • Posts: 125
  • Decatur Alabama
    • View Profile
Re: Need help identifying distributor shaft for 1111467 distributor
« Reply #3 on: August 06, 2012, 01:50:27 AM »
Thanks for responding, it appears there is little documentation on this subject, I hope I get more responses so we can know definitively which are the proper parts and how to identifiy them.
Thanks again
Roger

z28z11

  • Hero Member
  • *****
  • Posts: 1853
    • View Profile
Re: Need help identifying distributor shaft for 1111467 distributor
« Reply #4 on: August 06, 2012, 03:56:57 AM »
Roger,

   No problem. I checked the shaft of the 499 that I have apart - 100% original just like the 467 before disassembly - it's stamped "163". I'll check the 480 when I can get to it - I'll report on it too. Anyone else out there with a number, please check in -

Regards,
Steve
1968 Z28 M21/U17 BRG/W 1967 Chevy ll Nova SS 
1969 Z28 X77/M20/VE3 LeMans/W
1969 L78 X66/N66 Cortez/BVT
1969 Z11 L48/M35/C60/C06  1949 3100 5wd 235/6

 

anything