Author Topic: 69 Z-28 Tire Size  (Read 3740 times)


  • Newbie
  • *
  • Posts: 14
    • View Profile
69 Z-28 Tire Size
« on: May 15, 2012, 09:53:09 PM »
Just wanted to confirm what I think to be the case before tire purchase.  Looking to get some new tires for 69 Z with stock wheels, suspension etc.  Would be Radial TA's.  Question is size.  I want to come fairly close to the original tires which I think were E or G 70-15.  A little bigger would be OK but I  would  like a look close  to stock appearance and not have any rubbing problems.  I found a post from JohnZ from 11/2009 and he recommended 215/65-15 TA's.  Would that seem to fit what I am looking for?  Thanks


  • CRG Member
  • *****
  • Posts: 1347
    • View Profile
Re: 69 Z-28 Tire Size
« Reply #1 on: May 15, 2012, 10:07:40 PM »
Original tire size was E70 x 15.

Those should fit without problem with one exception. If your car is a Rally-Sport tire clearance is limited by the actuator brackets/shields. Back in the day it was not unusual to see holes in the shields from tire contact. Z/28s had a lower trim height and at full LH lock the left tire [205s] on my RS would occasionally contact the inner fender.

Mount one wheel/tire and install it on the left front. If that has no issues the others should be fine.


  • Member
  • ***
  • Posts: 92
    • View Profile
Re: 69 Z-28 Tire Size
« Reply #2 on: May 16, 2012, 02:20:57 PM »
If its a non-RS Z, 235/60's fit great and don't rub. They are 26.1" in height, compared to the 26.5" of the original tire.

A 225/65 would be dead on, but I don't think the make them in a BFG.
1969 X77 01B 51 51 flat hood


  • CRG Member
  • *****
  • Posts: 4288
    • View Profile
Re: 69 Z-28 Tire Size
« Reply #3 on: May 16, 2012, 03:23:15 PM »
235/60's seem to be the most popular and most frequently seen replacement size - that's what my '69Z had on it when I bought it 12 years ago; it has the original springs, and I had occasional rubs at 12 o'clock at the top of both front wheel opening moldings at full lock (like entering a driveway or parking space). I replaced them with 215/65's, which are dimensionally almost identical to the original E70-15's, and no longer have any rubbing (and the speedo is dead-on accurate). If you have new springs and your car sits a bit higher than mine, 235/60's may not be a problem.
'69 Z/28
Fathom Green


  • Hero Member
  • *****
  • Posts: 530
    • View Profile
    • photobucket
Re: 69 Z-28 Tire Size
« Reply #4 on: July 24, 2012, 12:04:40 AM »
I just got the 215/65s. Alot of the  sizes were back ordered and the only 235 I found was the Coker version. My car doesn't have power steering and my buddy reminded me that fat tire might be harder to turn too
1969 Z28, Burgandy, numbers matching, 12,900 miles
1967 Plymouth GTX Hemi, 4 speed, dana
1961 Chrysler 300G convertible