Author Topic: Correct cowl hood relay screw  (Read 6553 times)

srode

  • Member
  • ***
  • Posts: 173
    • View Profile
Correct cowl hood relay screw
« on: January 01, 2012, 01:14:44 PM »
What's the correct cowl hood relay screw and where can I get one?  Just got done cleaning up my original relay, would like to mount it with the correct screw now.  I see the part number 9415191 in the AIM but can't find anyone that carries one. 
Steve - 02D Z11 and a Plain Jane hardtop

copo

  • Member
  • ***
  • Posts: 98
    • View Profile
Re: Correct cowl hood relay screw
« Reply #1 on: January 01, 2012, 08:02:11 PM »
The screw is listed in the AMK catalog with there part # B-12049.

srode

  • Member
  • ***
  • Posts: 173
    • View Profile
Re: Correct cowl hood relay screw
« Reply #2 on: January 01, 2012, 10:39:52 PM »
Thanks!  I need to start using AMK it looks like for these types of fasteners.  Looks like they have pretty much everything.  Will take a little while to figure out  how to use their catablog. 
Steve - 02D Z11 and a Plain Jane hardtop

tmodel66

  • Hero Member
  • *****
  • Posts: 1212
    • View Profile
Re: Correct cowl hood relay screw
« Reply #3 on: January 01, 2012, 11:13:45 PM »
I bought complete kits for my car and they work great. About 90% of the time the head markings were just like my old ones. I did bag all my original bolts though for future use if need be.
Daniel  
'69 SS 350/4 speed  Fathom Green--POP

68Zproject

  • Hero Member
  • *****
  • Posts: 1868
    • View Profile
Re: Correct cowl hood relay screw
« Reply #4 on: January 02, 2012, 03:11:35 AM »
The AMK stuff is functionally correct, but not always restoration correct.  Not all of the bolt headmarks are correct for that.
68Z28

srode

  • Member
  • ***
  • Posts: 173
    • View Profile
Re: Correct cowl hood relay screw
« Reply #5 on: January 02, 2012, 07:01:06 PM »
They have a kit G-5111 that has the fastener and lock washer that goes behind the relay.  Looks like the thing to get instead of a bag of 20 of the fasteners  :)
Steve - 02D Z11 and a Plain Jane hardtop

RPOZ11

  • Member
  • ***
  • Posts: 60
    • View Profile
Re: Correct cowl hood relay screw
« Reply #6 on: January 02, 2012, 08:41:08 PM »
If I find some time later I will see what mine looks like & let you know...
VN Pacecar

srode

  • Member
  • ***
  • Posts: 173
    • View Profile
Re: Correct cowl hood relay screw
« Reply #7 on: January 02, 2012, 10:16:57 PM »
Thanks, much appreciated.
Steve - 02D Z11 and a Plain Jane hardtop

RPOZ11

  • Member
  • ***
  • Posts: 60
    • View Profile
Re: Correct cowl hood relay screw
« Reply #8 on: January 04, 2012, 07:37:01 AM »
I originally replated this screw but as you can see,
over the course of time,
It has began to build up some surface rust.

Hope this helps....



VN Pacecar

srode

  • Member
  • ***
  • Posts: 173
    • View Profile
Re: Correct cowl hood relay screw
« Reply #9 on: January 04, 2012, 11:10:14 AM »
Thanks, very helpful - I'll start looking through parts to try an match that head stamp - the one at AMK doesn't have it, but it will do until I get the correct one. 
Steve - 02D Z11 and a Plain Jane hardtop

Dave69x33

  • Hero Member
  • *****
  • Posts: 542
    • View Profile
Re: Correct cowl hood relay screw
« Reply #10 on: January 14, 2012, 02:34:33 AM »
68Z28Project is correct.  AMK is probably one of the best resources we have for restoration hardware but it may not be identical to the original hardware originally installed.  Here is a picture of AMK's screw #B-120049, 8-18 x 3/8 Zink plated that I purchased for this application.  It is a plane head without the "C" marking RPOZ11 shows.  It possible that there were multiple hardware suppliers for this application and variation can be expected. 

RPOZ11, is this the original screw?  What is the plant and build date of your car?

Does anyone else have an unrestored or original screw for this cowl induction relay application? If you do, please post a picture and note the plant and build date of your car.

Thanks!

RPOZ11

  • Member
  • ***
  • Posts: 60
    • View Profile
Re: Correct cowl hood relay screw
« Reply #11 on: January 16, 2012, 05:12:10 AM »
---> RPOZ11, is this the original screw?  What is the plant and build date of your car?

Screw : YES

March 1969
VN Pacecar

Dave69x33

  • Hero Member
  • *****
  • Posts: 542
    • View Profile
Re: Correct cowl hood relay screw
« Reply #12 on: January 24, 2012, 04:17:01 AM »
RPOZ11,

I recently organized all my original used hardware and misc parts from my restoration from over 13+ years ago and found the same “C” head marking screw you show!  I cleaned it and its now back in its correct place.

Moral of the store...never, never throw anything way because you never know when your old junk might become a treasure.

Thanks again for your picture.