Author Topic: 67-68 shifter mounting nuts - for sale  (Read 5173 times)

KurtS

  • CRG Coordinator
  • *****
  • Posts: 3627
    • View Profile
67-68 shifter mounting nuts - for sale
« on: August 10, 2011, 06:43:43 PM »
Many years ago, CRG had reproductions of the 67-68 shifter nuts made. These are the nuts that are used to mount the manual trans shifter housing to the transmission crossmember - shown on page A4 of the M20 section of the Assembly Manual (#14 and 18 in 67, #13 and 17 in 68).
These have not be repro'd by anyone else and we want to make them available to restorers. The price is $20 including shipping.
Paypal to my email or email me for my address.

Thanks!
Kurt
Kurt S
CRG

1968 Z28

  • Member
  • ***
  • Posts: 485
    • View Profile
Re: 67-68 shifter mounting nuts - for sale
« Reply #1 on: August 10, 2011, 07:47:01 PM »
Kurt....Now you tell me....I bought at keast three used shifters on Ebay before I finally got those nuts.  Seriously though....I was also looking for other shifter parts when these nuts finally showed up on one of them.  Don't know for sure how many used shifters I now have but I think I now have enough good parts to make two complete shifters and rods.

Do you have any other shifter parts on hand?  Always need to know additional sources for any part.
Jerry G.

Z28-1968-07C-Norwood
Ermine White, Red Std. Interior
2nd. Owner, 38,000 miles

68Zproject

  • Hero Member
  • *****
  • Posts: 1634
    • View Profile
Re: 67-68 shifter mounting nuts - for sale
« Reply #2 on: August 10, 2011, 10:00:32 PM »
Jerry,Muncie shifters?
68Z28

1968 Z28

  • Member
  • ***
  • Posts: 485
    • View Profile
Re: 67-68 shifter mounting nuts - for sale
« Reply #3 on: August 10, 2011, 10:24:05 PM »
Jerry,Muncie shifters?
Yup.....Muncies!  Need some parts.....might have it.
Jerry G.

Z28-1968-07C-Norwood
Ermine White, Red Std. Interior
2nd. Owner, 38,000 miles

KurtS

  • CRG Coordinator
  • *****
  • Posts: 3627
    • View Profile
Re: 67-68 shifter mounting nuts - for sale
« Reply #4 on: August 11, 2011, 02:19:03 AM »
I don't have any other 67-8 shifter parts (or 67-8 parts at all!).
Kurt S
CRG

Hatman

  • Member
  • ***
  • Posts: 21
    • View Profile
Re: 67-68 shifter mounting nuts - for sale
« Reply #5 on: August 13, 2011, 04:10:42 PM »
I am glad I found those in the pile of gease & gunk when I pressure wash my crossmember they were covered in grease and stayed in plce while carrying the cross member to & from the truck & at the thime I diidn't even know those parts existed.

68Zproject

  • Hero Member
  • *****
  • Posts: 1634
    • View Profile
Re: 67-68 shifter mounting nuts - for sale
« Reply #6 on: August 13, 2011, 06:28:44 PM »
I am glad I found those in the pile of gease & gunk when I pressure wash my crossmember they were covered in grease and stayed in plce while carrying the cross member to & from the truck & at the thime I diidn't even know those parts existed.

That's what happened to me.  I went to clean the greasy junk off and this oblong thing came off.
68Z28

GTMeach

  • Newbie
  • *
  • Posts: 17
    • View Profile
Re: 67-68 shifter mounting nuts - for sale
« Reply #7 on: December 12, 2012, 03:52:50 PM »
I actually found a set in a junkyard...the standard 3-speed floor shifters used the same nuts

KurtS

  • CRG Coordinator
  • *****
  • Posts: 3627
    • View Profile
Re: 67-68 shifter mounting nuts - for sale
« Reply #8 on: December 12, 2012, 04:47:40 PM »
Yup, the samples that these nuts were based on came from a 3-speed shifter.
Kurt S
CRG

XP836

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: 67-68 shifter mounting nuts - for sale
« Reply #9 on: April 11, 2013, 01:24:27 PM »

  YUP ! As Dave Hester would say ( A. & E. storage wars). I got mine from  Kurt , again many thanks ! Great part at great price . Too easy

KurtS

  • CRG Coordinator
  • *****
  • Posts: 3627
    • View Profile
Re: 67-68 shifter mounting nuts - for sale
« Reply #10 on: July 08, 2013, 08:38:43 PM »
Yes, there still are some nuts left. ;)
But I'm out of the country for the next year, so any orders for these will have to wait til I return.
Kurt S
CRG

69Z28-RS

  • Hero Member
  • *****
  • Posts: 3032
  • owner since 4-Apr-1976
    • View Profile
Re: 67-68 shifter mounting nuts - for sale
« Reply #11 on: July 08, 2013, 09:10:59 PM »
for the NEXT YEAR???      hopefully you aren't going to Russia for one of those mail order brides? *G*
What's CRG to do???
Gary W / 09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette convertible, silver/black 350 hp,
60 Corvette white/red, 72 Corvette coupe, '70 Mach I 
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

KurtS

  • CRG Coordinator
  • *****
  • Posts: 3627
    • View Profile
Re: 67-68 shifter mounting nuts - for sale
« Reply #12 on: July 10, 2013, 05:33:40 AM »
No, of course not. Kazakhstan.
Kurt S
CRG

tom

  • Hero Member
  • *****
  • Posts: 1144
    • View Profile
    • Discount Internet Services
Re: 67-68 shifter mounting nuts - for sale
« Reply #13 on: July 10, 2013, 10:07:55 AM »
Looking for more export Camaro's ?
69 X11 Z21 L14 glide
looking for a 69 export model (KPH) speed
o