Author Topic: 69 z28 tach installation  (Read 1753 times)

canadair

  • Member
  • ***
  • Posts: 97
    • View Profile
69 z28 tach installation
« on: May 17, 2011, 11:02:26 AM »
I want to install a factory in dash tach there is a seperate tach harness available for about $25.00 I can't find a elec print showing where the wires run to has anyone done this install and can guide me Jack

JohnZ

  • CRG Member
  • *****
  • Posts: 4245
    • View Profile
Re: 69 z28 tach installation
« Reply #1 on: May 17, 2011, 02:48:48 PM »
The harness should include instructions. The tach needs switched ignition power, a ground, and a brown wire to the coil (-) terminal.
'69 Z/28
Fathom Green
CRG

Ed B

  • CRG Member
  • *****
  • Posts: 2333
    • View Profile
Re: 69 z28 tach installation
« Reply #2 on: May 17, 2011, 03:01:36 PM »
Also check out U16 in the AIM. It shows some detailed information.

Ed

rich69rs

  • Hero Member
  • *****
  • Posts: 891
  • LF7/M35/Z22/Z87
    • View Profile
Re: 69 z28 tach installation
« Reply #3 on: May 17, 2011, 05:55:25 PM »
http://www.camaros.org/forum/index.php?topic=3211.0

You might find the template included in the above link helpful.  I added the tach to my 69 RS about 15 yrs ago when I also added the console gauges.  No issues - take your time and all will be good.

Good luck.

Richard
Richard Thomas
1969 RS

mark x22

  • Member
  • ***
  • Posts: 131
    • View Profile
Re: 69 z28 tach installation
« Reply #4 on: May 17, 2011, 10:03:33 PM »




69pace

  • Member
  • ***
  • Posts: 384
    • View Profile
    • TeamCamaro - Moderator
Re: 69 z28 tach installation
« Reply #5 on: June 20, 2011, 01:01:34 AM »
Easy direction come with the AAW Factory Fit brand harness.
1969 Z-11 350/300 with 4 Speed