Author Topic: Power Steering Pump Pulley  (Read 5939 times)

montgomg

  • Member
  • ***
  • Posts: 68
    • View Profile
Power Steering Pump Pulley
« on: March 14, 2011, 03:25:12 PM »
I removed the power steering pump pulley from my 69 Z28. It is part number 3770509CE. Could some one tell me what the application(s) is/are for this pulley?

Gramps69Z

  • Hero Member
  • *****
  • Posts: 653
  • 69 X33 D80
    • View Profile
Re: Power Steering Pump Pulley
« Reply #1 on: March 14, 2011, 03:29:16 PM »
 

http://www.camaros.org/suspen.shtml#steer

 http://www.camaros.org/pdf/pulleys-69-2007-02-01.pdf  


 According to the charts 3941105 would be the deep groove pulley and 3770509CE is not.
Captain John Wykoff
Destin Fire:   October 31, 2015 at 0700--Officially Retired

Gramps69Z

  • Hero Member
  • *****
  • Posts: 653
  • 69 X33 D80
    • View Profile
Re: Power Steering Pump Pulley
« Reply #2 on: March 14, 2011, 03:59:20 PM »
I went out to verify the pulley on my car and it reads 3941105DD.
Captain John Wykoff
Destin Fire:   October 31, 2015 at 0700--Officially Retired

Boston14

  • Member
  • ***
  • Posts: 252
    • View Profile
Re: Power Steering Pump Pulley
« Reply #3 on: March 14, 2011, 09:20:59 PM »
My 1969 L48 has the 3770509CE P/S pulley ........... before refinishing
boston14

1969 SS/RS 350 Convertible
Dover White with Black Top and D90 stripe, Red Standard Interior

montgomg

  • Member
  • ***
  • Posts: 68
    • View Profile
Re: Power Steering Pump Pulley
« Reply #4 on: March 14, 2011, 09:38:32 PM »
I removed the 3770509CE pulley to put the correct 3941105DD deep groove on it.
Just wondering what the 3770509CE fits.

montgomg

  • Member
  • ***
  • Posts: 68
    • View Profile
Re: Power Steering Pump Pulley
« Reply #5 on: March 14, 2011, 09:42:29 PM »
According to the CRG charts the pulley in question fits a small block (307, 327, 350) but not the 302. That works. Thanks all.

Gramps69Z

  • Hero Member
  • *****
  • Posts: 653
  • 69 X33 D80
    • View Profile
Re: Power Steering Pump Pulley
« Reply #6 on: March 14, 2011, 09:46:37 PM »
According to the CRG charts the pulley in question fits a small block (307, 327, 350) but not the 302. That works. Thanks all.

Yep, that's what the chart reads.
Captain John Wykoff
Destin Fire:   October 31, 2015 at 0700--Officially Retired

IZRSSS

  • Guest
Re: Power Steering Pump Pulley
« Reply #7 on: March 14, 2011, 09:54:09 PM »
Just wondering what the 3770509CE fits.

Montgomg...The CRG chart you referenced includes the SB 350. Boston14's car is a 350-L48, so his pully is the correct application for his car...3770509CE.

 

anything