« previous next »
Pages: [1]

Author Topic: Question on Splash Sheild Clip for '68  (Read 9890 times)

cadmanof50s

  • Member
  • ***
  • Posts: 55
  • Vic Brincat
    • View Profile
Question on Splash Sheild Clip for '68
« on: December 22, 2010, 07:07:55 PM »
Looking to source a clip for my '68. The clip is used to hold up an obscure section of fender splash shield on the left side. I found all kinds of splash shield kits ..but nothing for this clip..

You can see the clip on the first picture of this post..


http://www.camaros.net/forums/showthread.php?t=71611


You can also find it in the 68 Assembly manual, UPC 11-13 Sheet B1. The part number is called 3921872 Clip

Thanks for your help.

Vic Brincat
'68 Camaro RS Convertible
« Last Edit: December 22, 2010, 07:32:03 PM by vicbrincat »
Logged
Vic Brincat
1968 Camaro RS Convertible - 327

jacmac

  • Member
  • ***
  • Posts: 277
    • View Profile
Re: Question on Splash Sheild Clip for '68
« Reply #1 on: December 23, 2010, 01:05:04 AM »
Looks the same as my 69, same part number.I dont see it in my Classic Industries or Rcks catalog.Sorry I could not be more help
Logged
69 Z10,69 ss396Chevelle, 71 Corvette

68rs327conv

  • Member
  • ***
  • Posts: 111
    • View Profile
    • The build
Re: Question on Splash Sheild Clip for '68
« Reply #2 on: January 11, 2011, 09:43:59 PM »
Logged
Mike
68 RS Conv 327/210hp, Powerglide Factory AC

cadmanof50s

  • Member
  • ***
  • Posts: 55
  • Vic Brincat
    • View Profile
Re: Question on Splash Sheild Clip for '68
« Reply #3 on: January 11, 2011, 09:48:12 PM »
Thanks Mike!


Vic
Logged
Vic Brincat
1968 Camaro RS Convertible - 327

BlackoutSteve

  • Member
  • ***
  • Posts: 397
    • View Profile
Re: Question on Splash Sheild Clip for '68
« Reply #4 on: January 12, 2011, 10:37:47 AM »
Vic, scroll down to post #25 of that thread-link you posted..
You may need to do what I did and make one!

It was very easy.  ;)
Logged
Restoring my RHD 69 Jane in Melbourne, Australia.
http://www.usmuscle.com.au/Forum/showthread.php?t=2840

cadmanof50s

  • Member
  • ***
  • Posts: 55
  • Vic Brincat
    • View Profile
Re: Question on Splash Sheild Clip for '68
« Reply #5 on: January 12, 2011, 01:55:04 PM »
Thanks Steve. I will ceratinly make one if all else fails. I have downloaded your pics to use for a blueprint.
Thanks again for the post!

Vic
Logged
Vic Brincat
1968 Camaro RS Convertible - 327

68camaroz28

  • Hero Member
  • *****
  • Posts: 2233
    • View Profile
Re: Question on Splash Sheild Clip for '68
« Reply #6 on: January 13, 2011, 05:06:42 PM »
Quote from: vicbrincat on January 12, 2011, 01:55:04 PM
Thanks Steve. I will ceratinly make one if all else fails. I have downloaded your pics to use for a blueprint.
Thanks again for the post!

Vic


Vic, I have mine out of the car and recently glass beaded it. If you need some other pictures or dimensions let me know.
Logged
Chick
68 Z/28 NOR 01B Orig motor/trans/rear
69 Z/28 NOR 07A Orig Block & GM Cross-ram/carbs
69 L34 Rest. Nova Father/Son Car
69 L78 Surv Nova Purch 4/69 31K miles
67 L89 Corv Tribute
68 Corv 427/400 Orig motor
07 Corv Z06
R 68Z build- http://www.camaros.net/forums/showthread.php?t=182584

firstgenaddict

  • Hero Member
  • *****
  • Posts: 2882
  • caretaker of 1971 LT1's 11130 & 21783
    • View Profile
    • Groome Family Automobiles
Re: Question on Splash Sheild Clip for '68
« Reply #7 on: January 13, 2011, 05:19:24 PM »
They are made from Spring Steel and appear to be heat treated/blued
here is a refinshed one...
Logged
James
Collectin' Camaro's since "Only Rednecks drove them"
Current caretaker of 1971 LT1's - 11130 and 21783 Check out the Black 69 RS/Z28 45k mile Survivor and the Lemans Blue 69 Z 10D frame off...
https://plus.google.com/photos/112392262205377424364/albums?banner=pwa

cadmanof50s

  • Member
  • ***
  • Posts: 55
  • Vic Brincat
    • View Profile
Re: Question on Splash Sheild Clip for '68
« Reply #8 on: January 13, 2011, 07:09:50 PM »
Thanks folks!

68camaroz28 if you could take two minutes and post dimensions it would be greatly appreciated.

Thanks again.

Vic
Logged
Vic Brincat
1968 Camaro RS Convertible - 327

68camaroz28

  • Hero Member
  • *****
  • Posts: 2233
    • View Profile
Re: Question on Splash Sheild Clip for '68
« Reply #9 on: January 14, 2011, 01:37:32 AM »
Angle is approximately 10 degrees.






Logged
Chick
68 Z/28 NOR 01B Orig motor/trans/rear
69 Z/28 NOR 07A Orig Block & GM Cross-ram/carbs
69 L34 Rest. Nova Father/Son Car
69 L78 Surv Nova Purch 4/69 31K miles
67 L89 Corv Tribute
68 Corv 427/400 Orig motor
07 Corv Z06
R 68Z build- http://www.camaros.net/forums/showthread.php?t=182584

cadmanof50s

  • Member
  • ***
  • Posts: 55
  • Vic Brincat
    • View Profile
Re: Question on Splash Sheild Clip for '68
« Reply #10 on: January 14, 2011, 05:11:33 AM »
Many thanks 68camaroz28,  for taking the time to do this. The pics are exactly what I need.
I'm sure others will find this information useful as well.
Logged
Vic Brincat
1968 Camaro RS Convertible - 327

Marty

  • CRG Member
  • *****
  • Posts: 122
    • View Profile
Re: Question on Splash Sheild Clip for '68
« Reply #11 on: January 30, 2011, 08:32:50 PM »
Vic, I found an extra clip in one of my parts boxes today. If you're interested send me an email.

Martin Foltz
Logged
Martin Foltz
CRG Member
68 Van Nuys Camaro
Pages: [1]
« previous next »
 

anything