Question on Splash Sheild Clip for '68

cadmanof50s · December 22, 2010, 02:07:55 PM

Looking to source a clip for my '68. The clip is used to hold up an obscure section of fender splash shield on the left side. I found all kinds of splash shield kits ..but nothing for this clip..

You can see the clip on the first picture of this post..

http://www.camaros.net/forums/showthread.php?t=71611

You can also find it in the 68 Assembly manual, UPC 11-13 Sheet B1. The part number is called 3921872 Clip

Thanks for your help.

Vic Brincat
'68 Camaro RS Convertible

jacmac · December 22, 2010, 08:05:04 PM

Looks the same as my 69, same part number.I dont see it in my Classic Industries or Rcks catalog.Sorry I could not be more help

68rs327conv · January 11, 2011, 04:43:59 PM

See ebay auction, notice clip you are looking for is attached

http://cgi.ebay.com/ebaymotors/1968-69-Camaro-inner-fender-well-brace-rubbers-and-clip-_W0QQcmdZViewItemQQhashZitem33642b2848QQitemZ220723882056QQptZVintageQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Mike

cadmanof50s · January 11, 2011, 04:48:12 PM

Thanks Mike!

Vic

BlackoutSteve · January 12, 2011, 05:37:47 AM

Vic, scroll down to post #25 of that thread-link you posted..
You may need to do what I did and make one!

It was very easy.

cadmanof50s · January 12, 2011, 08:55:04 AM

Thanks Steve. I will ceratinly make one if all else fails. I have downloaded your pics to use for a blueprint.
Thanks again for the post!

Vic

68camaroz28 · January 13, 2011, 12:06:42 PM

Quote from: vicbrincat on January 12, 2011, 08:55:04 AM
Thanks Steve. I will ceratinly make one if all else fails. I have downloaded your pics to use for a blueprint.
Thanks again for the post!

Vic

Vic, I have mine out of the car and recently glass beaded it. If you need some other pictures or dimensions let me know.

firstgenaddict · January 13, 2011, 12:19:24 PM

They are made from Spring Steel and appear to be heat treated/blued
here is a refinshed one...

cadmanof50s · January 13, 2011, 02:09:50 PM

Thanks folks!

68camaroz28 if you could take two minutes and post dimensions it would be greatly appreciated.

Thanks again.

Vic

68camaroz28 · January 13, 2011, 08:37:32 PM

Angle is approximately 10 degrees.

cadmanof50s · January 14, 2011, 12:11:33 AM

Many thanks 68camaroz28, for taking the time to do this. The pics are exactly what I need.
I'm sure others will find this information useful as well.

Marty · January 30, 2011, 03:32:50 PM

Vic, I found an extra clip in one of my parts boxes today. If you're interested send me an email.

Martin Foltz

News:

Question on Splash Sheild Clip for '68