Author Topic: 68 Console Ammeter Wiring  (Read 3970 times)

cadmanof50s

  • Member
  • ***
  • Posts: 55
  • Vic Brincat
    • View Profile
68 Console Ammeter Wiring
« on: December 04, 2010, 03:59:03 AM »
The console ammeter has a connector with two wires:
a Black wire and a Black and White wire.
The ammeter terminal has one screw that is silver the other copper colored.
 
Which way does the connector go? Black wire to silver post and B/W to copper? or the other way?
 
The easy way to determine is to connect the battery and check to see if the needle is going in the right direction. But my car is apart and I would much rather not disassemble the console gages once it's together.
 
Does anyone have a picture of the wires/connectors at the gages of the console?
 
Thanks,
 
Vic

Vic Brincat
1968 Camaro RS Convertible - 327

68Zproject

  • Hero Member
  • *****
  • Posts: 1868
    • View Profile
Re: 68 Console Ammeter Wiring
« Reply #1 on: December 04, 2010, 04:06:47 AM »
I don't know if this helps, but my wiring diagram shows the B/W wire goes to the bottom terminal.
68Z28

Boston14

  • Member
  • ***
  • Posts: 252
    • View Profile
Re: 68 Console Ammeter Wiring
« Reply #2 on: December 04, 2010, 03:14:04 PM »
Try reading this topic.     http://www.camaros.org/forum/index.php?topic=4227.0

boston14
boston14

1969 SS/RS 350 Convertible
Dover White with Black Top and D90 stripe, Red Standard Interior

cadmanof50s

  • Member
  • ***
  • Posts: 55
  • Vic Brincat
    • View Profile
Re: 68 Console Ammeter Wiring
« Reply #3 on: December 04, 2010, 05:34:58 PM »
Thanks  for the information, folks.

Boston14, the link has evrything I need, including an actual picture of the gage connections.

Many thanks!
Vic

Vic Brincat
1968 Camaro RS Convertible - 327

 

anything