Author Topic: Side Glass Weatherstrip Channel Fasteners.  (Read 7663 times)

BlackoutSteve

  • Member
  • ***
  • Posts: 397
    • View Profile
Side Glass Weatherstrip Channel Fasteners.
« on: March 13, 2011, 03:07:31 AM »
Hello, can someone please show me the correct side glass weatherstrip channel fasteners please.
And/or AMK part number would be good too thanks.

(That retain these to the body.. http://www.heartbeatcity.com/store/product/19452/Camaro-Roof-rail-channel-kit--6-piece--68-69/)

Thinking something like.. ??? http://www.amkproducts.com/bulk2.asp?code=7250&title=Tapping+Screws+%2D+Wafer+Head
Restoring my RHD 69 Jane in Melbourne, Australia.
http://www.usmuscle.com.au/Forum/showthread.php?t=2840

BlackoutSteve

  • Member
  • ***
  • Posts: 397
    • View Profile
Re: Side Glass Weatherstrip Channel Fasteners.
« Reply #1 on: March 13, 2011, 11:00:59 PM »
A second, more thorough look through my Fisher Manual found this..





Now, can someone please tell me where is the GM Parts Manual, as in, what section or page is it listed in/on please?
For the life of me, I can not find it.
I have been looking in section 10, 11 and 12.
I believe that 10.721 is the "Retainer, side roof rail", as well as "Weatherstrip, side roof rail" however there is no mention anywhere I can find that list the screws. (Yes, I checked under Screws.)

Scrolling through PDFs suck big-time! I gotta get this thing printed. Just blown a whole hour.. Give me a book anyday.
Restoring my RHD 69 Jane in Melbourne, Australia.
http://www.usmuscle.com.au/Forum/showthread.php?t=2840

tmodel66

  • Hero Member
  • *****
  • Posts: 1212
    • View Profile
Re: Side Glass Weatherstrip Channel Fasteners.
« Reply #2 on: March 13, 2011, 11:20:29 PM »
If I remember correctly I am a firm believer those screws are the same kind that are used on the wheel opening molding. They have a flat washer with a slightly raised head.
Daniel  
'69 SS 350/4 speed  Fathom Green--POP

GaryL

  • Hero Member
  • *****
  • Posts: 538
  • Marilyn and me
    • View Profile
Re: Side Glass Weatherstrip Channel Fasteners.
« Reply #3 on: March 14, 2011, 12:15:28 AM »
Steve, the pic you show is close, but not original. The original was a self-drilling screw. The head had a wide washer head, but the phillips screw had a slightly raised head the size of a normal screw head
Gary

Lemans Blue X33. DZ, M20, manual steering. Only BU code rear end is original.

BlackoutSteve

  • Member
  • ***
  • Posts: 397
    • View Profile
Re: Side Glass Weatherstrip Channel Fasteners.
« Reply #4 on: March 14, 2011, 03:24:02 AM »
Also thinking very similar to the wheel arch moulding screws, but Gary, after finding that illustration in the Fisher Body manual, I realize the AMK example I previously posted is incorrect.

I'm now thinking more like.. (No self drilling in this size)
http://www.amkproducts.com/bulk3.asp?part=B%2D10063
Restoring my RHD 69 Jane in Melbourne, Australia.
http://www.usmuscle.com.au/Forum/showthread.php?t=2840

flyingskibiker

  • Member
  • ***
  • Posts: 311
    • View Profile
Re: Side Glass Weatherstrip Channel Fasteners.
« Reply #5 on: March 14, 2011, 04:09:37 AM »
You can't search your PDF file?  I search the AIMs I bought on CD...

BlackoutSteve

  • Member
  • ***
  • Posts: 397
    • View Profile
Re: Side Glass Weatherstrip Channel Fasteners.
« Reply #6 on: March 14, 2011, 06:19:14 AM »
I'm not talking about the Assembly or the Fisher Manual. I'm talikng about the phone-book-sized Chevrolet Parts Manual that the dealers would have had. I have one on PDF covering all models from 1967-1975 and searching a file/book that large with maybe 1000 pages is a real pita.  :)
Restoring my RHD 69 Jane in Melbourne, Australia.
http://www.usmuscle.com.au/Forum/showthread.php?t=2840

Sauron327

  • Hero Member
  • *****
  • Posts: 1359
    • View Profile
Re: Side Glass Weatherstrip Channel Fasteners.
« Reply #7 on: March 14, 2011, 12:25:36 PM »
I just pulled this from a '68. It's the same as others I have, as well as a '66 GTO I recently yanked apart.

BlackoutSteve

  • Member
  • ***
  • Posts: 397
    • View Profile
Re: Side Glass Weatherstrip Channel Fasteners.
« Reply #8 on: March 15, 2011, 02:52:54 AM »
Thanks again Scott for your emails and your help.

The dimensions are ~1/2" in length and diameter. The closest available from AMK, I believe, is B-11170.

http://www.amkproducts.com/bulk3.asp?part=B-11170

Restoring my RHD 69 Jane in Melbourne, Australia.
http://www.usmuscle.com.au/Forum/showthread.php?t=2840

flyingskibiker

  • Member
  • ***
  • Posts: 311
    • View Profile
Re: Side Glass Weatherstrip Channel Fasteners.
« Reply #9 on: March 15, 2011, 03:11:56 AM »
Ah.  Got it! (re: large PDF searches)

BlackoutSteve

  • Member
  • ***
  • Posts: 397
    • View Profile
Re: Side Glass Weatherstrip Channel Fasteners.
« Reply #10 on: March 15, 2011, 05:05:57 AM »
where.. where.. where??  :D

Oh, you mean you know what I'm talking about.. (Damn, I was hoping you found the screws in the pdf.. I lucked out on that search.. :-\)
Restoring my RHD 69 Jane in Melbourne, Australia.
http://www.usmuscle.com.au/Forum/showthread.php?t=2840

flyingskibiker

  • Member
  • ***
  • Posts: 311
    • View Profile
Re: Side Glass Weatherstrip Channel Fasteners.
« Reply #11 on: March 16, 2011, 04:56:40 AM »
haha  I don't have the pdf or I'd give it a shot! ;-)

 

anything