Author Topic: 68 Z28 Cowl Plenum air cleaner components availability?  (Read 15743 times)

Prackman

  • Member
  • ***
  • Posts: 39
    • View Profile
68 Z28 Cowl Plenum air cleaner components availability?
« on: December 26, 2009, 05:48:24 PM »
Any known source for reproduction cowl plenum air cleaner components for a 68 Camaro?
Was this dealer installed add-on really that functional and worth installing if one was found?

Thanks
John
1969 Z/28 VN Built
1967 SS

LB68SS350

  • Member
  • ***
  • Posts: 23
    • View Profile
Re: 68 Z28 Cowl Plenum air cleaner components availability?
« Reply #1 on: December 26, 2009, 09:49:47 PM »
There sure is. Try these guys-  www.taperfresto.com  Good Luck!   Larry

john302

  • Member
  • ***
  • Posts: 368
    • View Profile
Re: 68 Z28 Cowl Plenum air cleaner components availability?
« Reply #2 on: December 27, 2009, 02:51:43 AM »
You can also try Nelson Rudilson. He sells all steel repops.The ones that TA PERFORMANCE sells are made out of fiberglass. Not very correct .If you want a real one I would sell one of mine. Thanks John  Allouez Restorations

LB68SS350

  • Member
  • ***
  • Posts: 23
    • View Profile
Re: 68 Z28 Cowl Plenum air cleaner components availability?
« Reply #3 on: December 27, 2009, 04:14:02 AM »
I guess it depends how much somebody's willing to pay for one, or for an original when you get down to it.The ones that TA perf resto sells are $950. Shop around!

Charley

  • Hero Member
  • *****
  • Posts: 707
    • View Profile
Re: 68 Z28 Cowl Plenum air cleaner components availability?
« Reply #4 on: December 27, 2009, 07:01:11 AM »
There were some nice repo ones on Ebay...


fireZ

  • Hero Member
  • *****
  • Posts: 548
    • View Profile
Re: 68 Z28 Cowl Plenum air cleaner components availability?
« Reply #6 on: December 27, 2009, 02:51:03 PM »
I tried to get a hold of the fellow Charley said but had no luck. Does anyone know if his are steel or fibreglass?
1968 Z28 LA Built
LIC # RPO Z28

Charley

  • Hero Member
  • *****
  • Posts: 707
    • View Profile
Re: 68 Z28 Cowl Plenum air cleaner components availability?
« Reply #7 on: December 27, 2009, 03:26:48 PM »
"This is a very close reproduction assembly in steel and
    aluminum of the original cowl plenum and the duct. This part is very durable and will not disappoint in fit and
    finish. I have the mold and can reproduce more plenums and ducts on request, The inside of the duct also   
    has a smooth finish making this reproduction part very difficult to tell apart from the originals with the   
    exception that this part is better looking and surpasses other similar aftermarket parts that sell for more."

Jerry@CHP

  • CRG Member
  • *****
  • Posts: 1512
    • View Profile
Re: 68 Z28 Cowl Plenum air cleaner components availability?
« Reply #8 on: December 27, 2009, 05:02:31 PM »
Nelson's are about the best.  And they are nice.  The fiberglas ones are not good and do not look anything like an original.

Jerry

Prackman

  • Member
  • ***
  • Posts: 39
    • View Profile
Re: 68 Z28 Cowl Plenum air cleaner components availability?
« Reply #9 on: December 27, 2009, 05:14:48 PM »
Nelson's are about the best.  And they are nice.  The fiberglas ones are not good and do not look anything like an original.

Jerry

Jerry - does "Nelson" have a website?
John
1969 Z/28 VN Built
1967 SS

LB68SS350

  • Member
  • ***
  • Posts: 23
    • View Profile
Re: 68 Z28 Cowl Plenum air cleaner components availability?
« Reply #10 on: December 28, 2009, 04:43:59 AM »
Here you go-  NKR Products  Nelson Rudisill  828 874 2335  North Carolina

Prackman

  • Member
  • ***
  • Posts: 39
    • View Profile
Re: 68 Z28 Cowl Plenum air cleaner components availability?
« Reply #11 on: December 29, 2009, 04:01:10 PM »
Thanks everyone for your replies about the availability of this style of air cleaner, but WOW what a cost!
Going to my original 2nd question, did this style of AC provide that more of a performance factor?
John
1969 Z/28 VN Built
1967 SS

lakeholme

  • Hero Member
  • *****
  • Posts: 2497
  • 68-12D L30/M35
    • View Profile
Re: 68 Z28 Cowl Plenum air cleaner components availability?
« Reply #12 on: December 29, 2009, 10:14:27 PM »
That's in Rutherford College, NC...
Website info: http://webpages.charter.net/nelsonrudisill/nkrproducts/contacts.htm
Phillip, HNR & NCR-AACA, Senior Master, Team Captain, Admin.,
Spring Southeastern Nationals chair, AACA National Director

JohnZ

  • CRG Member
  • *****
  • Posts: 4365
    • View Profile
Re: 68 Z28 Cowl Plenum air cleaner components availability?
« Reply #13 on: December 30, 2009, 02:32:23 PM »
Going to my original 2nd question, did this style of AC provide that more of a performance factor?

The (minor) benefit was colder intake air; the rule of thumb is that you'll get a 1% power increase for every 10*F reduction in intake charge temperature. The other (perceived) benefit is intake roar when the flapper valve opens at WOT. :-)
'69 Z/28
Fathom Green
CRG

william

  • CRG Member
  • *****
  • Posts: 3119
    • View Profile
Re: 68 Z28 Cowl Plenum air cleaner components availability?
« Reply #14 on: December 30, 2009, 06:13:55 PM »
Somewhere in Smokey Yunicks' book he mentions developing the plenum air intake with Chevy for the '63 Mystery Motor cars he ran at Daytona. He stated at speed it also provides a few pounds of boost.
Learning more and more about less and less...

 

anything