Author Topic: 68 rocker molding trim clips  (Read 7696 times)

tinman75

  • Member
  • ***
  • Posts: 81
  • 1968 ash gold rs-ss
    • View Profile
68 rocker molding trim clips
« on: April 08, 2009, 12:04:30 AM »
Anyone ever find a good original style lower rocker molding clip for a 68? It look like the repops are junk. Or does someone have a few originals laying around. Dont need a complete set.

rat pack

  • CRG Member
  • *****
  • Posts: 223
    • View Profile
Re: 68 rocker molding trim clips
« Reply #1 on: April 08, 2009, 01:47:10 AM »
Are you talking about the ones for the Rally Sport moldings? The standard ones are just like originals. The repros for the RS moldings are very hard to work with, but they do work. I have used others that require a nut to hold them on from the backside for the ones on the doors and quarter panels. If I can find the Auveco part number I will post it later tomorrow along with a picture of the clip..............RatPack.............
Just keep livin......L I V I N .............

tinman75

  • Member
  • ***
  • Posts: 81
  • 1968 ash gold rs-ss
    • View Profile
Re: 68 rocker molding trim clips
« Reply #2 on: April 08, 2009, 10:38:45 AM »
Rat pack,
 Thanks for the reply, Yeah, They are for the rally sport, Do you know if they work for the original 1/2 inch hole size on the door? if you could pic and auveco part # I would apreciate it.
Thanks
« Last Edit: April 08, 2009, 10:55:37 AM by tinman75 »

rat pack

  • CRG Member
  • *****
  • Posts: 223
    • View Profile
Re: 68 rocker molding trim clips
« Reply #3 on: April 08, 2009, 07:13:32 PM »
Okay, I just found out today that the clips I have been using are no longer available, but the Auveco clip shown in the picture will work. The clips I had a stash of were made by a company called JOBCO, and they have not made these clips in about 8 years. However, I did find a company that can reproduce them, but I do not know what the cost will be. I had some of the Auveco clips in the bins, and I installed it on a spare molding to see how it fit. No big difference than the JOBCO other than it not having a foam seal which can be easily made. Check with any Auveco dealer for part #2619 for individual clips, or for a box of 25 #12958. These will work just fine. Be sure to use a "washer lock nut" to install them, and the Auveco number for those are 2558. I will post pictures of the other clips on the next reply...........I hope this helps...................RatPack.........................
Just keep livin......L I V I N .............

rat pack

  • CRG Member
  • *****
  • Posts: 223
    • View Profile
Re: 68 rocker molding trim clips
« Reply #4 on: April 08, 2009, 07:14:41 PM »
Here are some close-ups of the disocontinued clip..........RatPack..............
Just keep livin......L I V I N .............

tinman75

  • Member
  • ***
  • Posts: 81
  • 1968 ash gold rs-ss
    • View Profile
Re: 68 rocker molding trim clips
« Reply #5 on: April 09, 2009, 10:27:45 AM »
Thanks for the help!!! I will contact them

Ue

  • Member
  • ***
  • Posts: 56
  • 68
    • View Profile
Re: 68 rocker molding trim clips
« Reply #6 on: March 14, 2015, 09:43:32 PM »
Hi Guys,  I know this is an old topic but I want to know what the original 68 RS molding clips look like and the pics above are no longer available to be viewed. Can anyone repost an original clip please?
Cheers,
Ue.

vtfb68

  • Hero Member
  • *****
  • Posts: 527
    • View Profile
Re: 68 rocker molding trim clips
« Reply #7 on: March 15, 2015, 01:24:33 AM »
Ue,
 PM me your e-mail and I will forward you a great picture of the discontinued clips.
    Victor
68 05C LA RS/SS U2 712 L34 M21 BR
68 08E LA RS Y2 749 L30 M35
67 11B LA  RS/SS M-1 797-Z L48 M21  Convertible

Ue

  • Member
  • ***
  • Posts: 56
  • 68
    • View Profile
Re: 68 rocker molding trim clips
« Reply #8 on: March 18, 2015, 10:05:49 AM »
Hi Victor.
I PM'd you if you have the chance to reply with the pics.

Do the correct clips look like this??

http://www.ebay.com.au/itm/370775607788?_trksid=p2055119.m1438.l2648&ssPageName=STRK%3AMEBIDX%3AIT
Cheers,
Ue.

vtfb68

  • Hero Member
  • *****
  • Posts: 527
    • View Profile
Re: 68 rocker molding trim clips
« Reply #9 on: March 18, 2015, 02:40:55 PM »
Ue,
 I weill send you the pictures when I get home today. Those look like the clips that are now offered from the venders.
    Victor
68 05C LA RS/SS U2 712 L34 M21 BR
68 08E LA RS Y2 749 L30 M35
67 11B LA  RS/SS M-1 797-Z L48 M21  Convertible

Ue

  • Member
  • ***
  • Posts: 56
  • 68
    • View Profile
Re: 68 rocker molding trim clips
« Reply #10 on: March 19, 2015, 08:17:39 AM »
Special Thanks to Victor!

For anyone looking at this thread in the future, Here's the pics Victor sent me...
Hope this helps future RS restorers.

Suppliers have them.

Camaro Central
1968 Molding Clips Kit, Rocker Panel, Rally Sport, OE Style
Part # BCM-18B
http://www.camarocentral.com/1968_Molding_Clips_Kit_Rocker_Panel_RS_OE_Style_p/bcm-18b.htm

Classic Industries
K4089 - 1968 CAMARO 6 PIECE RS LOWER MOLDING CLIP SET
http://www.classicindustries.com/product/1968/camaro/parts/k4089.html
Cheers,
Ue.