Author Topic: Updated site info  (Read 12820 times)

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5884
    • View Profile
Updated site info
« on: March 24, 2009, 09:24:27 PM »
JohnZ updated his assembly article with some new schedule info and repair info. I added several factory pictures that I've been collecting over the years and put internal hyperlinks in the article (I've also been adding the internal hyperlinks to other articles). http://www.camaros.org/assemblyprocess.shtml

I also redid the trans page with some crossmember information and eliminated the FAQ format.
Kurt S
CRG

gro51

  • Member
  • ***
  • Posts: 234
  • 68 SS/RS 350
    • View Profile
Re: Updated site info
« Reply #1 on: March 24, 2009, 09:46:07 PM »
Wow!  Great job Kurt and John!  Awesome information and pictures.  Thanks!
Joe
Schodack, NY

'68 SS/RS 350, M21, 3:73, Rallye Green, Black Deluxe Interior

Pex68

  • Member
  • ***
  • Posts: 394
    • View Profile
Re: Updated site info
« Reply #2 on: March 24, 2009, 10:42:59 PM »
Nice!!!  Pictures are sweet!!!  Like the hyperlinks too!  Great job guys...THANKS!!!!
Chris P
1968 Sequoia Green SS 396/325 M20

TonyHuntimerRaceHome

  • Member
  • ***
  • Posts: 49
    • View Profile
Re: Updated site info
« Reply #3 on: March 24, 2009, 11:10:29 PM »
Nice updates!

Tony Huntimer

crobjones2

  • Member
  • ***
  • Posts: 404
    • View Profile
Re: Updated site info
« Reply #4 on: March 25, 2009, 01:15:49 AM »
Great info
Thank you for all your hard work.
Question - if there were only a small # of vehicles with a certain paint color, were they all painted at the same time? Would they have sequential body #'s?
Chris
69 SS 350

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5884
    • View Profile
Re: Updated site info
« Reply #5 on: March 25, 2009, 02:53:16 AM »
The cars didn't go thru the body shop in body # order. They went in order by sequence / rotation #.

John may have insight on this, but I'd say they wouldn't go thru together. Special paints were manually shot so you wouldn't want to have them all in a row cause they wouldn't be able to keep up. And there's no advantage of having them in order since they are being shot from a pressure pot.
Kurt S
CRG

1968RSZ28

  • Hero Member
  • *****
  • Posts: 6188
    • View Profile
Re: Updated site info
« Reply #6 on: March 25, 2009, 04:19:55 AM »
COOL!!    8)

Any idea what the "62" on the firewall of the '67 Camaro "Front Sheetmetal Assembly" photo indicates?

Paul

Larry

  • Member
  • ***
  • Posts: 74
    • View Profile
    • 1968 Camaro Z 28 Rally Sport
Re: Updated site info
« Reply #7 on: March 25, 2009, 09:02:35 AM »
Amazing!!! All the robots have two arms and two legs!!!
Larry

jdv69z

  • Hero Member
  • *****
  • Posts: 1275
  • 69 RS Z/28 52E
    • View Profile
Re: Updated site info
« Reply #8 on: March 25, 2009, 12:39:10 PM »
The cars didn't go thru the body shop in body # order. They went in order by sequence / rotation #.

John may have insight on this, but I'd say they wouldn't go thru together. Special paints were manually shot so you wouldn't want to have them all in a row cause they wouldn't be able to keep up. And there's no advantage of having them in order since they are being shot from a pressure pot.

I've noticed on broadcast copies that the sequence # was 3 digits. So was the number tied to a given day's production, ie, start at 1 and go thru 912 every day, etc.?? Then reset the next day??

Jimmy V.
Jimmy V.

JohnZ

  • CRG Member
  • *****
  • Posts: 4365
    • View Profile
Re: Updated site info
« Reply #9 on: March 25, 2009, 06:13:55 PM »
I've noticed on broadcast copies that the sequence # was 3 digits. So was the number tied to a given day's production, ie, start at 1 and go thru 912 every day, etc.?? Then reset the next day??

Jimmy V.

The sequence number was assigned automatically (and sequentially) by the scheduling computer when the body exited the body bank, at which point the body was "locked in sequence" and remained that way until the car was driven off the end of the Final Line. As I recall, the numbers just started at 001, went to 999, and rolled over again continuously with no daily "reset".
« Last Edit: March 26, 2009, 03:55:15 AM by KurtS »
'69 Z/28
Fathom Green
CRG

glenn64vette

  • Member
  • ***
  • Posts: 33
    • View Profile
Re: Updated site info
« Reply #10 on: March 25, 2009, 06:39:33 PM »
Great job as always!

jdv69z

  • Hero Member
  • *****
  • Posts: 1275
  • 69 RS Z/28 52E
    • View Profile
Re: Updated site info
« Reply #11 on: March 25, 2009, 07:26:51 PM »
I've noticed on broadcast copies that the sequence # was 3 digits. So was the number tied to a given day's production, ie, start at 1 and go thru 912 every day, etc.?? Then reset the next day??

Jimmy V.

The sequence number was assigned automatically (and sequentially) by the scheduling computer when the body exited the body bank, at which point the body was "locked in sequence" and remained that way until the car was driven off the end of the Final Line. As I recall, the numbers just started at 001, went to 999, and rolled over again continuously with no daily "reset".

Thanks, John
Jimmy V.

1968RSZ28

  • Hero Member
  • *****
  • Posts: 6188
    • View Profile
Re: Updated site info
« Reply #12 on: March 28, 2009, 03:43:08 AM »
Any idea what the "62" on the firewall of the '67 Camaro "Front Sheetmetal Assembly" photo indicates?

Bump...

Paul

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5884
    • View Profile
Re: Updated site info
« Reply #13 on: March 28, 2009, 04:40:44 AM »
That's the sequence # for Fisher. It does not match the sequence # on the broadcast sheets, so it wasn't for Chevrolet.
Kurt S
CRG

1968RSZ28

  • Hero Member
  • *****
  • Posts: 6188
    • View Profile
Re: Updated site info
« Reply #14 on: March 29, 2009, 06:12:09 AM »
That's the sequence # for Fisher. It does not match the sequence # on the broadcast sheets, so it wasn't for Chevrolet.

Thank you.

Paul

 

anything