Author Topic: Looking for rear spoiler studs  (Read 5571 times)

Da67Kid

  • Member
  • ***
  • Posts: 60
    • View Profile
Looking for rear spoiler studs
« on: January 21, 2009, 04:19:06 AM »
Looking for a place to buy them or info on what size and thread  so I could make them ? thanks

Da67Kid

  • Member
  • ***
  • Posts: 60
    • View Profile
Re: Looking for rear spoiler studs
« Reply #1 on: January 21, 2009, 10:59:30 AM »
Nobody has any ideas? Come on need to find this out did a search came up with 0

Sauron327

  • Hero Member
  • *****
  • Posts: 1359
    • View Profile
Re: Looking for rear spoiler studs
« Reply #2 on: January 21, 2009, 12:19:12 PM »
I'm sure you tried the vendors. You can use hanger bolts if neccessary. They are in the hardware bins in the hardware stores. Many sizes and lengths from which to choose. Also available in stainless.

Mark

  • CRG Member
  • *****
  • Posts: 1089
    • View Profile
Re: Looking for rear spoiler studs
« Reply #3 on: January 21, 2009, 04:55:03 PM »
They have different threads on each end with an intergral flat washer (part of the stud itself) in the middle.  They are about 1 1/2" long overall, and the lower threads (into the trunk) are 1/4-20.  The upper (into the spoiler) are more like a wood or self threading type of screw thread.
Mark C.
1969 Indy Pace Car
350/300HP RPO Z11

Sauron327

  • Hero Member
  • *****
  • Posts: 1359
    • View Profile
Re: Looking for rear spoiler studs
« Reply #4 on: January 21, 2009, 08:07:02 PM »
They have different threads on each end with an intergral flat washer (part of the stud itself) in the middle.  They are about 1 1/2" long overall, and the lower threads (into the trunk) are 1/4-20.  The upper (into the spoiler) are more like a wood or self threading type of screw thread.

That's what hanger bolt are, But no integral washer. I left out the thread specs. Sorry about that.

NHBandit

  • Newbie
  • *
  • Posts: 9
    • View Profile
Re: Looking for rear spoiler studs
« Reply #5 on: January 22, 2009, 01:35:50 AM »
 Sauron327  Thanks for the tip. I was wondering this same thing myself and when I bought a "kit" on Ebay awhile back all I got was some 1/4x20 pieces of threaded rod & a bag of nuts & washers. Not at all what I was looking for.

Sauron327

  • Hero Member
  • *****
  • Posts: 1359
    • View Profile
Re: Looking for rear spoiler studs
« Reply #6 on: January 22, 2009, 02:09:14 AM »
Your welcome. Spoiler studs are self tapping. You'll have to tap the hole to do it correctly w/ the H. bolts.
Scott

Da67Kid

  • Member
  • ***
  • Posts: 60
    • View Profile
Re: Looking for rear spoiler studs
« Reply #7 on: January 22, 2009, 04:47:27 AM »
Thanks SST it will be.