Author Topic: 1969 Z/28 Belt  (Read 11997 times)

jl8dale

  • Member
  • ***
  • Posts: 146
    • View Profile
1969 Z/28 Belt
« on: December 29, 2008, 10:09:30 PM »
Does anybody have a brand name and part number for the belt used on a 1969 Z/28 without smog. It runes the crank pulley, water pump pulley, and the alternator. I am being told by my supplier that he doesn't have one and doesn't know where to get one.
I believe I bought one for one of my other Z's many years ago at a local Napa but I don't remember anymore.
1969 Z/28 Daytona Yellow/Yellow Houndstooth, Tilt, Fold Down Seat, - POP

CVKUEBER

  • Member
  • ***
  • Posts: 119
    • View Profile
Re: 1969 Z/28 Belt
« Reply #1 on: December 29, 2008, 10:49:49 PM »
The only part number in the GM catalog for 1969 302 is 9433746. I can order one for 16.00 + freight
GM parts-tech. Polar Chevrolet White Bear Lake, Mn

firstgenaddict

  • Hero Member
  • *****
  • Posts: 2882
  • caretaker of 1971 LT1's 11130 & 21783
    • View Profile
    • Groome Family Automobiles
Re: 1969 Z/28 Belt
« Reply #2 on: December 29, 2008, 10:52:22 PM »
You need the belt for the a automatic 350, it has no smog.
James
Collectin' Camaro's since "Only Rednecks drove them"
Current caretaker of 1971 LT1's - 11130 and 21783 Check out the Black 69 RS/Z28 45k mile Survivor and the Lemans Blue 69 Z 10D frame off...
https://plus.google.com/photos/112392262205377424364/albums?banner=pwa

CVKUEBER

  • Member
  • ***
  • Posts: 119
    • View Profile
Re: 1969 Z/28 Belt
« Reply #3 on: December 29, 2008, 11:40:56 PM »
350 a/t with 42 amp gen would be part# 9433741. Still available from GM. I  can still order that as well. Pm me.
GM parts-tech. Polar Chevrolet White Bear Lake, Mn

tom

  • Hero Member
  • *****
  • Posts: 1146
    • View Profile
    • Discount Internet Services
Re: 1969 Z/28 Belt
« Reply #4 on: December 30, 2008, 04:01:03 PM »
You should be able to cross the GM number to most other belt suppliers. A functional belt may be available over the counter at your local parts supplier.
69 X11 Z21 L14 glide
looking for a 69 export model (KPH) speed
o

jl8dale

  • Member
  • ***
  • Posts: 146
    • View Profile
Re: 1969 Z/28 Belt
« Reply #5 on: December 30, 2008, 04:30:23 PM »
Thanks guys, that's what I'll do.
I'll probably go to a Napa and buy a few and see which one fits.
It just seems extremely odd to me that this part does not seem to be known to camaro suppliers.
1969 Z/28 Daytona Yellow/Yellow Houndstooth, Tilt, Fold Down Seat, - POP

tom

  • Hero Member
  • *****
  • Posts: 1146
    • View Profile
    • Discount Internet Services
Re: 1969 Z/28 Belt
« Reply #6 on: December 30, 2008, 04:43:10 PM »
Gates web site cross references 9433741 to 7440, and
9433746 to 7465
69 X11 Z21 L14 glide
looking for a 69 export model (KPH) speed
o

firstgenaddict

  • Hero Member
  • *****
  • Posts: 2882
  • caretaker of 1971 LT1's 11130 & 21783
    • View Profile
    • Groome Family Automobiles
Re: 1969 Z/28 Belt
« Reply #7 on: December 30, 2008, 05:08:57 PM »
Rick's First Gens does list the shorter belt as an alternate for a Z without smog... or they did a few years ago.
James
Collectin' Camaro's since "Only Rednecks drove them"
Current caretaker of 1971 LT1's - 11130 and 21783 Check out the Black 69 RS/Z28 45k mile Survivor and the Lemans Blue 69 Z 10D frame off...
https://plus.google.com/photos/112392262205377424364/albums?banner=pwa

GaryL

  • Hero Member
  • *****
  • Posts: 538
  • Marilyn and me
    • View Profile
Re: 1969 Z/28 Belt
« Reply #8 on: December 30, 2008, 07:13:32 PM »
It is a SB automatic w/o AC belt.
Gary

Lemans Blue X33. DZ, M20, manual steering. Only BU code rear end is original.

JohnZ

  • CRG Member
  • *****
  • Posts: 4365
    • View Profile
Re: 1969 Z/28 Belt
« Reply #9 on: December 31, 2008, 03:31:25 PM »
Thanks guys, that's what I'll do.
I'll probably go to a Napa and buy a few and see which one fits.
It just seems extremely odd to me that this part does not seem to be known to camaro suppliers.

The Camaro suppliers probably don't list it, as it was never catalogued as a GM usage - there was no such thing as a Z/28 without an A.I.R. pump.
'69 Z/28
Fathom Green
CRG

jdv69z

  • Hero Member
  • *****
  • Posts: 1275
  • 69 RS Z/28 52E
    • View Profile
Re: 1969 Z/28 Belt
« Reply #10 on: December 31, 2008, 03:51:54 PM »
I actually changed from one length belt to a longer one on my Z w/o AIR. Alternator was almost to end of adjustment slot on the one I had, so I went To NAPA and asked for one 2 or 3 inches longer than the one I had with me. They were able to look the belts up by length. And now the alternator is closer to the center of the adjustment range.

Jimmy V
Jimmy V.

GaryL

  • Hero Member
  • *****
  • Posts: 538
  • Marilyn and me
    • View Profile
Re: 1969 Z/28 Belt
« Reply #11 on: January 01, 2009, 10:15:25 PM »
Thanks guys, that's what I'll do.
I'll probably go to a Napa and buy a few and see which one fits.
It just seems extremely odd to me that this part does not seem to be known to camaro suppliers.

The Camaro suppliers probably don't list it, as it was never catalogued as a GM usage - there was no such thing as a Z/28 without an A.I.R. pump.

What I was saying is the correct belt length is the same for a SB, automatic w/o AC. That gives you a 302 w/o smog pump length.
Gary

Lemans Blue X33. DZ, M20, manual steering. Only BU code rear end is original.

jl8dale

  • Member
  • ***
  • Posts: 146
    • View Profile
Re: 1969 Z/28 Belt
« Reply #12 on: January 01, 2009, 10:30:23 PM »
I confirmed today by looking at one of my other Z's that it is a GM Restoration Belt B-442.

Thanks for all of your help.
1969 Z/28 Daytona Yellow/Yellow Houndstooth, Tilt, Fold Down Seat, - POP

RamAirDave

  • Member
  • ***
  • Posts: 334
    • View Profile
    • TheMuscleCarGuys.com
Re: 1969 Z/28 Belt
« Reply #13 on: January 02, 2009, 04:40:59 AM »
The Camaro suppliers probably don't list it, as it was never catalogued as a GM usage - there was no such thing as a Z/28 without an A.I.R. pump.

What I was saying is the correct belt length is the same for a SB, automatic w/o AC. That gives you a 302 w/o smog pump length.

Yep, B-442 in Rick's: Alternator belt, SB w/o A/c, with A/T (also fits Z28 if no smog installed)

Quanta belt, but obviously would have the wrong # for a Z.
"Build them how the designers and engineers envisioned them to be"

www.TheMuscleCarGuys.com