Author Topic: Caps for 69 (68?) RS windshield washer bracket  (Read 24666 times)

camaro cat

  • Member
  • ***
  • Posts: 60
    • View Profile
Caps for 69 (68?) RS windshield washer bracket
« on: February 28, 2006, 07:11:09 PM »
I found these for sale on ebay (#4615700167). I purchased mine much the same as this seller. Can those of you with original RS cars or experience comment on correctness. I know the part # is the same as listed in the ASM. They always struck me as being to small for the screws I have on my bracket. I'm also intrested in pn# 3866096 Cap. I do not have these and would like to know any differances.

Can someone explain to me how to link the ebay site to here so you just have to click on it to get there?

Thanks

Loren
Loren
1967 RS L30 10C LOS
1969 SS/RS L78 02D NOR

waynechipman

  • Member
  • ***
  • Posts: 66
    • View Profile
Re: Caps for 69 (68?) RS windshield washer bracket
« Reply #1 on: April 04, 2006, 01:37:36 AM »
I sold some on ebay and they seemed to fit fine were not to tight, but they were original and 30 something years old

68rsssrag

  • Member
  • ***
  • Posts: 134
    • View Profile
Re: Caps for 69 (68?) RS windshield washer bracket
« Reply #2 on: April 06, 2006, 05:11:05 PM »
where exactly do these go?

I assume since there are 3 these are the ones that cover the st screws holding the bracket together and facing the firewall. The other part # may be for the smaller st screws holding the bracket to the firewall?

Arno

waynechipman

  • Member
  • ***
  • Posts: 66
    • View Profile
Re: Caps for 69 (68?) RS windshield washer bracket
« Reply #3 on: April 08, 2006, 01:26:50 AM »
Bracket to fender well. If I remember right all six screws are the same size, and so are the six rubber caps.

68rsssrag

  • Member
  • ***
  • Posts: 134
    • View Profile
Re: Caps for 69 (68?) RS windshield washer bracket
« Reply #4 on: April 09, 2006, 05:01:55 AM »
Hi Wayne

Is this a 69 thing, it doesn't show caps in my 68 AIM under any of the washer bottle drawings, plain, L34, etc.

The ST screws are #10 at fenderwell and 1/4 on the bracket.

Arno

waynechipman

  • Member
  • ***
  • Posts: 66
    • View Profile
Re: Caps for 69 (68?) RS windshield washer bracket
« Reply #5 on: April 10, 2006, 02:01:26 AM »
OH, Yes most likely a 69 difference. Mine were black also, I did not see your pic come up other times I viewed. Thanks

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5881
    • View Profile
Re: Caps for 69 (68?) RS windshield washer bracket
« Reply #6 on: April 11, 2006, 01:26:40 AM »
Here's a pic of originals on a 69.
I think there's only 3, pretty sure that's what the AIM says (mine is packed away right now).

Kurt
Kurt S
CRG

sam

  • Member
  • ***
  • Posts: 239
    • View Profile
Re: Caps for 69 (68?) RS windshield washer bracket
« Reply #7 on: April 25, 2006, 08:37:14 PM »
On page 460 of the AIM they show how they were installed. I take it that there might have been 6 used???? These caps also came on other models and years. Just recently a friend of mine had a 1967 L79 chevelle with 2 caps installed on the screws on the washer bottle bracket. They were original. I bought the ones from Wayne Chipman. A good man to deal with!  Sam

camaro cat

  • Member
  • ***
  • Posts: 60
    • View Profile
Re: Caps for 69 (68?) RS windshield washer bracket
« Reply #8 on: May 01, 2006, 03:31:28 AM »
Boy! I've been busy and haven't had much time to check back, so I was sure suprised to see this topic still getting recent comment. I appreciate your pictures Kurt. They of course are black while mine as in the ebay ad are red. However those in your picture look to be larger thus my concern about the red ones fitting on the screw without splitting. I am looking on page 460 of the AIM where it shows pn# 3767303 for the 3 screws coming up out of the inner fender (ones shown in your picture) and pn# 3866096 caps for the 3 screws used to attach the jar bracket to the support. Small parts I know but I have always been intrested in having correct items. Reminds me of the cap (3908372) used on the left rear shock only on all 1st gen camaro's. No one ever talks about them but they do exist.

Later

Loren
Loren
1967 RS L30 10C LOS
1969 SS/RS L78 02D NOR

ogbean

  • Member
  • ***
  • Posts: 99
    • View Profile
    • MySpace
Re: Caps for 69 (68?) RS windshield washer bracket
« Reply #9 on: May 01, 2006, 05:29:58 AM »
Quote
Reminds me of the cap (3908372) used on the left rear shock only on all 1st gen camaro's. No one ever talks about them but they do exist.

whats this about? was there a special cap there? or is it just the ones you see in the repo parts catalogs?
David

1968 L30 4spd ???, Rally Green, White Vinyl Top, Ivory Houndstooth Interior (716), D55 console, D91 Stripe

bertfam

  • Hero Member
  • *****
  • Posts: 4492
    • View Profile
Re: Caps for 69 (68?) RS windshield washer bracket
« Reply #10 on: May 01, 2006, 02:04:47 PM »
If you look in the AIM (UPC4, Sheet B3 for 1968), you'll see that there was a cap (P/N 3908372) installed on the left rear shock on all first gen's except convertibles. I'm not sure why it exists, nor do I know why it wasn't installed on convertibles. Perhaps for some kind of protections to keep things from getting ripped, but that's just a guess. JohnZ can probably tell us the REAL reason!

Ed
« Last Edit: May 01, 2006, 02:07:48 PM by bertfam »

JohnZ

  • CRG Member
  • *****
  • Posts: 4365
    • View Profile
Re: Caps for 69 (68?) RS windshield washer bracket
« Reply #11 on: May 01, 2006, 07:09:57 PM »
Here's a photo of the original cap on the left rear shock stud on my 02D '69Z; I assume it's there as a luggage protector.
'69 Z/28
Fathom Green
CRG

bertfam

  • Hero Member
  • *****
  • Posts: 4492
    • View Profile
Re: Caps for 69 (68?) RS windshield washer bracket
« Reply #12 on: May 01, 2006, 07:33:58 PM »
John,

Thanks, that's what I figured since there's not one on the passengers side (spare tire in the way so it's not needed), but now the real question. WHY did the convertibles not come with this? We have luggage too!!!

Ed

KevinW

  • Hero Member
  • *****
  • Posts: 855
    • View Profile
Re: Caps for 69 (68?) RS windshield washer bracket
« Reply #13 on: May 02, 2006, 11:17:31 PM »
Ed, it's because you cant FIT luggage in a convert trunk! :D

rich69rs

  • Hero Member
  • *****
  • Posts: 1109
  • LF7/M35/Z22/Z87
    • View Profile
Re: Caps for 69 (68?) RS windshield washer bracket
« Reply #14 on: May 09, 2006, 09:53:43 PM »
Attached pic shows 2 of the 3 original caps on the bracket screws frommy '69 RS prior to the beginning of the front end restoration in 2004.
Richard Thomas
1969 RS

rich69rs

  • Hero Member
  • *****
  • Posts: 1109
  • LF7/M35/Z22/Z87
    • View Profile
Re: Caps for 69 (68?) RS windshield washer bracket
« Reply #15 on: May 17, 2006, 02:22:51 AM »
These first two pics show the cap removed:
« Last Edit: May 17, 2006, 03:56:17 PM by rich69rs »
Richard Thomas
1969 RS

rich69rs

  • Hero Member
  • *****
  • Posts: 1109
  • LF7/M35/Z22/Z87
    • View Profile
Re: Caps for 69 (68?) RS windshield washer bracket
« Reply #16 on: May 17, 2006, 02:28:20 AM »
Next 3 pics show dimensions: approx. 0.530" long x 0.330" OD x 0.236" ID

« Last Edit: May 17, 2006, 03:49:16 PM by rich69rs »
Richard Thomas
1969 RS

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5881
    • View Profile
Re: Caps for 69 (68?) RS windshield washer bracket
« Reply #17 on: May 17, 2006, 04:53:54 AM »
Rich,
Yeah, real measurements with calipers!

Those pics you posted are fine.
Are there any markings on the top of the caps? The ones I saw had a single digit, IIRC.
Kurt S
CRG

rich69rs

  • Hero Member
  • *****
  • Posts: 1109
  • LF7/M35/Z22/Z87
    • View Profile
Re: Caps for 69 (68?) RS windshield washer bracket
« Reply #18 on: May 17, 2006, 03:52:35 PM »
Kurt-

I'll take another look, but I don't believe the caps on my car are marked at all.  Not sure of the material either - clearly wan't rubber, kind of a fibrous material.  See two pics below withouth the calipers.
Richard Thomas
1969 RS

PaceCarNut

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: Caps for 69 (68?) RS windshield washer bracket
« Reply #19 on: August 23, 2006, 11:16:02 PM »
We need to update the pictures here. The caps Kurt has are in a differant location then the one I have?? I will try and post some pictures tonight.

PaceCarNut

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: Caps for 69 (68?) RS windshield washer bracket
« Reply #20 on: August 23, 2006, 11:45:01 PM »
Here the pictures.





camaro cat

  • Member
  • ***
  • Posts: 60
    • View Profile
Re: Caps for 69 (68?) RS windshield washer bracket
« Reply #21 on: August 24, 2006, 03:14:57 AM »
Cool, Thats just what I was looking for. Its pretty obvious to me that the picture I started this conversation with of  the set that was sold on ebay and the set that I own, are not the correct caps. Someone bought those on ebay for big money considering what they are and then are not correct.  Now I'll have to find a set. Are the caps the same for the 3 screws holding the bracket to the inner fender as the ones you show installed on the bracket in the first two picture's. It does look to me that yours are plastic but Rich's look to be of a differant material. Differant suppliers?  I know some may think this is a small insignificant issue, but I enjoy it.

Thanks

Loren
Loren
1967 RS L30 10C LOS
1969 SS/RS L78 02D NOR

bertfam

  • Hero Member
  • *****
  • Posts: 4492
    • View Profile
Re: Caps for 69 (68?) RS windshield washer bracket
« Reply #22 on: August 24, 2006, 03:52:24 AM »
The original Part Number of 3866096, that was in the ebay auction, is in my P&A 34 as:

Group 10.154

67 Chevelle - CAP, washer jar (protective)

And you needed 2 of them...

Ed

Tinkerr

  • Member
  • ***
  • Posts: 340
    • View Profile
Re: Caps for 69 (68?) RS windshield washer bracket
« Reply #23 on: August 24, 2006, 06:03:16 PM »
Has it been concluded the screw caps are specific to 69? I don't see any mention in the 68 AIM. ???

firstgenaddict

  • Hero Member
  • *****
  • Posts: 2882
  • caretaker of 1971 LT1's 11130 & 21783
    • View Profile
    • Groome Family Automobiles
Re: Caps for 69 (68?) RS windshield washer bracket
« Reply #24 on: October 07, 2006, 07:18:02 PM »
I made a set of the wiper bottle screw caps... they are not quite perfect but much better than the reproductions... This was the first set and I learned from the process and believe that the next set will be much better.


James
Collectin' Camaro's since "Only Rednecks drove them"
Current caretaker of 1971 LT1's - 11130 and 21783 Check out the Black 69 RS/Z28 45k mile Survivor and the Lemans Blue 69 Z 10D frame off...
https://plus.google.com/photos/112392262205377424364/albums?banner=pwa