Author Topic: 1968 z28 speedo clips  (Read 9183 times)

fireZ

  • Hero Member
  • *****
  • Posts: 548
    • View Profile
1968 z28 speedo clips
« on: January 06, 2008, 09:38:30 PM »
I am doing some detail work on my 68 Z28.I can see were 2 speedo cable clips are but all the suppliers say 3 are required per car. I can see one located about 2 inches from were the cable exits the firewall and the other one is in the trans tunnel. Where would I look for the third clip?
1968 Z28 LA Built
LIC # RPO Z28

sd1968z28

  • Member
  • ***
  • Posts: 258
    • View Profile
Re: 1968 z28 speedo clips
« Reply #1 on: January 07, 2008, 02:47:27 PM »
i think there are only 2?

fireZ

  • Hero Member
  • *****
  • Posts: 548
    • View Profile
Re: 1968 z28 speedo clips
« Reply #2 on: January 07, 2008, 04:37:44 PM »
Thats what I think to but hard to see with car on the ground. DR classics book says 3 per car. I will try to look in an assembly manual. Thanks Paul
1968 Z28 LA Built
LIC # RPO Z28

mark x22

  • Member
  • ***
  • Posts: 131
    • View Profile
Re: 1968 z28 speedo clips
« Reply #3 on: January 07, 2008, 11:13:24 PM »


fireZ

  • Hero Member
  • *****
  • Posts: 548
    • View Profile
Re: 1968 z28 speedo clips
« Reply #4 on: January 08, 2008, 12:56:31 AM »
I cant thank you enough for the picture . Good info.
1968 Z28 LA Built
LIC # RPO Z28

68Zproject

  • Hero Member
  • *****
  • Posts: 1868
    • View Profile
Re: 1968 z28 speedo clips
« Reply #5 on: January 11, 2008, 05:17:26 AM »
There are 3
68Z28

deejaygee

  • Member
  • ***
  • Posts: 55
    • View Profile
Re: 1968 z28 speedo clips
« Reply #6 on: January 11, 2008, 06:09:40 AM »
Here are some photos of my 67 Z cable intallation. I count only 2 clips. Click on the yellow arrows on the diagram to see photos:

http://67z28.com/project/images/ImageMap.html

Pex68

  • Member
  • ***
  • Posts: 394
    • View Profile
Re: 1968 z28 speedo clips
« Reply #7 on: January 11, 2008, 03:09:03 PM »
Not sure if Z-28 differs from BB SS but there are 3 on mine.  See below.  The one right outside grommet is missing but you can see the hole, second is right the entrance to trans tunnel (partially blocked by end of ground strap) and third is deeper in trans tunnel right before cable makes bend to go to trans.
Hope this helps!

Chris P
1968 Sequoia Green SS 396/325 M20

68Zproject

  • Hero Member
  • *****
  • Posts: 1868
    • View Profile
Re: 1968 z28 speedo clips
« Reply #8 on: January 11, 2008, 08:09:56 PM »
Here are some photos of my 67 Z cable intallation. I count only 2 clips. Click on the yellow arrows on the diagram to see photos:

http://67z28.com/project/images/ImageMap.html

As your pic says, "see sheet A6", it shows the three clips.
68Z28

fireZ

  • Hero Member
  • *****
  • Posts: 548
    • View Profile
Re: 1968 z28 speedo clips
« Reply #9 on: January 11, 2008, 09:06:06 PM »
Thanks for the help guys, just a small detail but important to me.
1968 Z28 LA Built
LIC # RPO Z28

Pex68

  • Member
  • ***
  • Posts: 394
    • View Profile
Re: 1968 z28 speedo clips
« Reply #10 on: January 11, 2008, 09:10:43 PM »
No detail is too small...
Chris P
1968 Sequoia Green SS 396/325 M20

68Zproject

  • Hero Member
  • *****
  • Posts: 1868
    • View Profile
Re: 1968 z28 speedo clips
« Reply #11 on: January 12, 2008, 02:19:37 AM »
No, and fortunately, when one of us is missing something original, another person may have that and be missing something we have original.  Put us together, here, and voila.
68Z28

fireZ

  • Hero Member
  • *****
  • Posts: 548
    • View Profile
Re: 1968 z28 speedo clips
« Reply #12 on: January 12, 2008, 08:51:39 PM »
That the greatest thing about this site. Guys will share information.
1968 Z28 LA Built
LIC # RPO Z28

 

anything