Author Topic: Decoding a "68 z28 302" by the pad stamps?  (Read 4001 times)

bcmiller

  • CRG Member
  • *****
  • Posts: 4012
    • View Profile
Re: Decoding a "68 z28 302" by the pad stamps?
« Reply #15 on: April 29, 2022, 04:18:38 PM »
Block is fine, 19 days from casting to assembly is not unusual.

Bryon / 1968 Camaro SS 396 coupe - now old school 468 big block
1967 Camaro RS/SS 396 coupe L35/M40 - 4 generation family project
Looking for 68 Camaro with body # NOR 181016

firstgenaddict

  • Hero Member
  • *****
  • Posts: 2882
  • caretaker of 1971 LT1's 11130 & 21783
    • View Profile
    • Groome Family Automobiles
Re: Decoding a "68 z28 302" by the pad stamps?
« Reply #16 on: April 30, 2022, 06:28:16 PM »
Std bore with no ridge which will clean up without oversized pistons would be the best case scenario.
N355370?
IS the car around?
James
Collectin' Camaro's since "Only Rednecks drove them"
Current caretaker of 1971 LT1's - 11130 and 21783 Check out the Black 69 RS/Z28 45k mile Survivor and the Lemans Blue 69 Z 10D frame off...
https://plus.google.com/photos/112392262205377424364/albums?banner=pwa

ko-lek-tor

  • Hero Member
  • *****
  • Posts: 1858
  • someday I'll get one finished
    • View Profile
Re: Decoding a "68 z28 302" by the pad stamps?
« Reply #17 on: April 30, 2022, 06:40:52 PM »
If it is seized because of rust, that may not hurt the value too much, will probably still need bored regardless. If it is seized because the block is cracked from freezing or something else, it could very expensive to fix, if it can be? Years ago, a buddy bought a 427 block at an auction. It looked good. After together and in the car, he started getting water in oil. It had a crack looking from underside, up in cam galley area. Maybe worth fixing today, but he junked it.
Bentley to friends :1969 SS/RS 396 owned 79
1969 SS 350 (sold)
1969 D.H.COPO replica 4spd. owned since 85
1967 302 4 spd 5.13

firstgenaddict

  • Hero Member
  • *****
  • Posts: 2882
  • caretaker of 1971 LT1's 11130 & 21783
    • View Profile
    • Groome Family Automobiles
Re: Decoding a "68 z28 302" by the pad stamps?
« Reply #18 on: April 30, 2022, 06:54:06 PM »
If it is seized because of rust, that may not hurt the value too much, will probably still need bored regardless. If it is seized because the block is cracked from freezing or something else, it could very expensive to fix, if it can be? Years ago, a buddy bought a 427 block at an auction. It looked good. After together and in the car, he started getting water in oil. It had a crack looking from underside, up in cam galley area. Maybe worth fixing today, but he junked it.

I know of a 67 L71 engine which had MUCHO damage from a thrown rod, bottom of cylinder, pan rail(s) The owner took it to high end engine builder and told him if it took 3 years and 25k  he was ok with it... well 24 months and 12k later the block was solid and square without windows.
Canadian documented 67 L71 with N89 and N14, I figure 12k to keep the original block was money well spent.
James
Collectin' Camaro's since "Only Rednecks drove them"
Current caretaker of 1971 LT1's - 11130 and 21783 Check out the Black 69 RS/Z28 45k mile Survivor and the Lemans Blue 69 Z 10D frame off...
https://plus.google.com/photos/112392262205377424364/albums?banner=pwa

itsazooitellya

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: Decoding a "68 z28 302" by the pad stamps?
« Reply #19 on: April 30, 2022, 11:54:41 PM »
Ok, thanks all!