Author Topic: Preservation of a 68 Camaro  (Read 59765 times)

cook_dw

  • Hero Member
  • *****
  • Posts: 3981
    • View Profile
Preservation of a 68 Camaro
« on: December 01, 2021, 01:09:31 PM »
I’ve thought long and hard about this and I think, with the rising interest in proper restorations coupled with the surging popularity of survivor cars, while discussing with a core member we agreed it would be a good topic to discuss.  While I have decided that since RGR is no longer in business and, myself, wanting to help the community, I wanted to start a new thread on how and when to try to attempt preservation on these survivors.  I will be using my 68 Z as the platform for the processes I use.  I recently brought this car home from a prolonged storage at a friends home and I, then, took a small vacation from my automotive duties.  Now that the fog has settled, I have looked the car over and decided to abandon the original plan.  Which was restoration that has now turned into a preservation attempt.
       I thought seeing how far it had deteriorated to reviving the remaining original car and enjoy the path and hopefully learn some new info along the way.  Overall I look forward and encourage additional input from some of the; as I like calling them, Automotive Preservationists.  My approach will be from a person that likes to work in the garage and maybe doesn’t have limitless resources but I think an average enthusiast can do and feel good about doing it.  Also if you have never attempted any of these processes do so on a test panel or junk part before moving to the desired part or area needing the work.  Let me make it clear I am certainly no expert when it comes to preserving as this has always been a hobby.  With that said, Let’s get started…

First let’s go over the history of the car to date 11/22/21.  Car was originally ordered by Capitol Chevrolet in the fall of 1967 and left Van Nuys plant on 12/22/67.







Unfortunately no history has been found but the trail starts to pick up in the spring of 1970 with this article from the Austin Statesman newspaper.  I believe that this is potentially the order in which the story goes at this point.  Purely speculation to date.



01/20/70

Person w/ 68 Z writes into newspaper about hill climbing/gymkhana racing.
Columnist T.Q. Jones suggests going to Armstrong-Johnson Ford and meet up with the Cobra Colts Mustang Club.








While this is going on a salesman by the name Bill Pevey sends out a note in the paper that he was currently at Henna Chevrolet the other dealership in Austin aside from Capitol.



01/30/69

Bill Pevey ad for him moving to Henna Chevrolet

cook_dw

  • Hero Member
  • *****
  • Posts: 3981
    • View Profile
Re: Preservation of a 68 Camaro
« Reply #1 on: December 01, 2021, 01:20:00 PM »
The cause for this info as he then writes another ad in the for sale section that he was back at Armstrong Johnson Ford in



03/14/70

Bill Pevey (salesman) ad listing he left Henna Chevrolet to work for Armstrong-Johnson Ford dealership






This becomes important as Mr. Pevey places another ad several months later of a, you guessed it, 68 Z.


07/16/70 - 07/18/70

Ad appears 68 Z for sale to contact Bill Pevey with A/J phone number 454-3711







Also of note is the company Armstrong Johnson is undergoing a name change from the 51% of Bob Armstrong’s ownership being bought by Leif Johnson (which already owned the remainder 49%) in July of 1970.


07/27/70

Article about Leif Johnson buying out Bob Armstrong's 51% share of company to become primary owner of Ford dealership which would include the name change from Armstrong-Johnson Ford to Leif Johnson Ford.


This is very important as the car still has the Armstrong Johnson of Austin dealer emblem on the tail pan.  For the next month or so there are several ads with a 68 red Z28 for sale on the lot.






cook_dw

  • Hero Member
  • *****
  • Posts: 3981
    • View Profile
Re: Preservation of a 68 Camaro
« Reply #2 on: December 01, 2021, 01:24:42 PM »
This is where the lead cools off for a couple years.   We fast forward to April 1972 when I was able to obtain the last known registration of my Camaro’s vin in the Texas DMV database.  A gentleman named Mr. Donald A. Dixon.

cook_dw

  • Hero Member
  • *****
  • Posts: 3981
    • View Profile
Re: Preservation of a 68 Camaro
« Reply #3 on: December 01, 2021, 01:57:28 PM »
I have been searching for Mr. Dixon since 2013 as some of you might remember from previous posts.  The summer of 2021 became another jumping off point and reignited the search when a friend gave me access to their newspapers.com search and ultimately subscribed myself.  As I made my way through all this new found info I began the search again for Mr. Dixon.  Mr. Dixon originally was from middle TN and went to Texas for basic training and met a young lady that he dated for a month or two and as it turns out went to his girlfriends house for dinner one night.  As he pulled in there it sat in the yard like a shiny penny fresh off the press.  He amazingly worked a deal with her father (traded is 69 Roadrunner and $50 for the 68 Z) which was a wheeler dealer of used cars on the side from being a Major.  There were several training camps in the area as the Major was living in New Braunfels, Texas.  Mr. Dixon said the first thing he did after getting back to the base was go to the local speed shop and bought a new Hurst shifter.  Once Dixon finished training and was finally done with his service to our country he moved back in 1974.  Upon coming back to middle TN he traded the 68 Z into EB Smith Chevrolet on a 72 Monte Carlo and as he put it the worst mistake he ever made..


     No results were found on any transactions or listings for a 68 Z from EB Smith from 1974-1975.  The belief is EB wholesaled it to another used car lot where the next owner bought it in 1975.  His name was Randy Cassidy.  From ‘75 until 2005 he owned the car and in the late 70’s decided to blow the car apart and begin a resto.  Luckily for me, the car sat basically untouched until this fall.  My father, along with myself, had been after the car for as long as I remember. With the passing of my father in Oct of 2006 the car was passed on to me for ownership.  And with that, the preservation will begin.

cook_dw

  • Hero Member
  • *****
  • Posts: 3981
    • View Profile
Re: Preservation of a 68 Camaro
« Reply #4 on: December 01, 2021, 02:56:13 PM »
To start the preservation I decided to work on the pass side roof and see how much the ole Matador Red will come back to life.

Steps used to accomplish this was the following:

1.  Wash with your favorite dish soap.  Mine is Dawn and dry with a microfiber towel
2.  Pick a clay bar of your choice and go over the area you are preparing.  Mine for this project is Pinnacle clay bar and Meguiars Quick Detailer as the lubricant.
3.  Apply a generous coating of Meguiars #7 polish and hand polish it like you are mad at it and let it sit overnight and out of direct sunlight.
4.  800, 1500 and finally 2k wet grit paper - work backwards to make sure you don't go too far on prepping the painted surface and then go back in the order listed.  Every car is different so I can't stress this enough but take your time and practice before you get aggressive with the paper.
5.  Meguiars #105 with a wool pad on a DA polisher.  Reason I do not use a buffer as you can burn the paint quickly if you are not used to operating one.  DA polisher is much more forgiving in this regard.
6.  Meguiars #105 with a firm microfiber pad on a DA polisher. 
7.  Meguiars #105 with a medium (maroon Meguiars) pad on a DA polisher.
8.  Meguiars #205 with a soft (black Meguiars) pad on a DA polisher.
9.  Finish the area again with #7

Now these are the steps I use and seem to have decent success with this.  Realize that every car is different and other products will most likely do the same but for me I have had positive results using Meguiars so that is what I used.


Photo 1 - After washing and clay barring the application of the #7

Photo 2 - Roof after after wet sanding and #105 & #205 (steps 5-9)


cook_dw

  • Hero Member
  • *****
  • Posts: 3981
    • View Profile
Re: Preservation of a 68 Camaro
« Reply #5 on: December 01, 2021, 02:58:52 PM »
Photo 3 - Sail panel after wet sanding and before polishing

Photo 4 - Sail panel after polishing

Photo 5 - Pass quarter before steps listed in previous post

Photo 6 - Pass quarter after

cook_dw

  • Hero Member
  • *****
  • Posts: 3981
    • View Profile
Re: Preservation of a 68 Camaro
« Reply #6 on: December 01, 2021, 03:03:54 PM »
Photo 7 - Pass door before

Photo 8 - Pass door after

Photo 9 - Quarter and door after

janobyte

  • Hero Member
  • *****
  • Posts: 1531
  • Before it was called Day 2 !
    • View Profile
Re: Preservation of a 68 Camaro
« Reply #7 on: December 01, 2021, 03:16:13 PM »
Looking like this is going to be a great thread.
68 Z/28  born with: 302, drive line, etc..

169INDY

  • Hero Member
  • *****
  • Posts: 1790
    • View Profile
Re: Preservation of a 68 Camaro
« Reply #8 on: December 01, 2021, 04:34:43 PM »
Keep AT IT!
Jim
68 SS/RS L35 Th-400 LOS
69 Pace Car L48 Th-350 LOS
68 Z28 M21 LOS

lakeholme

  • Hero Member
  • *****
  • Posts: 2497
  • 68-12D L30/M35
    • View Profile
Re: Preservation of a 68 Camaro
« Reply #9 on: December 01, 2021, 04:37:22 PM »
Looking like this is going to be a great thread.

I agree!  I love the before and after contrast on pass side in photo 8.  Great idea to do this from the preservation approach.  The result is what a truly original car looks like.  Thank you for sharing your work!
Phillip, HNR & NCR-AACA, Senior Master, Team Captain, Admin.,
Spring Southeastern Nationals chair, AACA National Director

cook_dw

  • Hero Member
  • *****
  • Posts: 3981
    • View Profile
Re: Preservation of a 68 Camaro
« Reply #10 on: December 01, 2021, 05:32:07 PM »
Thanks gentlemen.

I was fortunate enough for a fellow CRG'er had a good eye and located me an original dealer emblem from Capitol Chevrolet.  Thanks Bentley.  As you can see although the emblem is a newer design without the attachment pins for the emblem which would have been later replaced by adhesive the location of the ejector pin locations match up perfectly with the original holes that were placed in the tail pan.

jwbavalon

  • Member
  • ***
  • Posts: 52
    • View Profile
Re: Preservation of a 68 Camaro
« Reply #11 on: December 01, 2021, 08:19:07 PM »
I'm looking forward to following this thread.

adjudimo

  • Member
  • ***
  • Posts: 172
    • View Profile
Re: Preservation of a 68 Camaro
« Reply #12 on: December 02, 2021, 02:47:07 AM »
This will be definitely worth following. thanks.

cook_dw

  • Hero Member
  • *****
  • Posts: 3981
    • View Profile
Re: Preservation of a 68 Camaro
« Reply #13 on: December 02, 2021, 01:27:26 PM »
While I work my way around the backside of the car I continue to use the same procedures mentioned above.  Some things to note.  The car, at some point (I can confirm prior to April '72 when Dixon bought the car), had been tapped in the rear and I believe that is when the spoiler was added and the trunk lid reshot and a touchup area on the pass side quarter.  I will leave it as found as I do not want to disturb the condition of its history.  You can also note the original paint along with stripes which were under the spoiler and once an emblem is in place you can see what's left of the cut out of the stripe for said emblem.  I will not this later on as I had to find an original replacement emblem as they did not move the emblem when the spoiler was installed.  Underside is still original and the remnants of the jacking instructions along with glue residue from the posi traction decal.  I will document those later in the process when I begin the trunk area clean up.  Now to the photos. 


Photo 10 - Another shot of the roof after final process.  It's still show imperfections like stains etc.  Unfortunately I do not know of anything that will rid them from the paint surface as it embeds deep into the paint.

 Photo 11 - Trunk Lid before.

Photo 12 - A little sanding brought out the original stripe under the repaint on the lip of the lid.





cook_dw

  • Hero Member
  • *****
  • Posts: 3981
    • View Profile
Re: Preservation of a 68 Camaro
« Reply #14 on: December 02, 2021, 02:56:13 PM »
Photo 13 & 14 - Trunk lid after.  You can see how the reshot did not hold up well over the years.  But again will not refinish.  You can also see that the pass side bumper guard does not sit flush on the bumper.  This is due to what I believe was also part of the rear end bump it obtained.  I will have to replace it with an original replacement due to the lower bracket that is welded to the guard broke its welds.  I have several used guards so this will not be an issue.  The primer sprayed on the drivers quarter and upper quarter and sail panel will be addressed.  I will remove this primer and keep whatever is underneath up to the surface.