Author Topic: 69 DZ 302 V1I15DZ  (Read 10039 times)

jf572dr

  • Newbie
  • *
  • Posts: 1
    • View Profile
69 DZ 302 V1I15DZ
« on: January 08, 2015, 04:53:53 AM »
I have a 1969 DZ302 engine I am selling and would like to mate it up to the original car if possible.

VIN: V1I15DZ
Casting # 3932386
Cast Date: K118

I recently purchased a vehicle that had been sitting in a garage for 35 years with this engine installed in it.

The transmission is a 1969 Muncie M21.
The heads are 3991492 (2.02 1.60) Service Heads and have angle spark plugs.

I disassembled the engine, leaving the crank (1178), connecting rods, main caps (2482), .030 Forged Pistons (L2210A) (11.8 Compression Ratio with the 492 Heads), Crane Cam (510) still in tack.

The cylinders look good with cross honing marks still visible, and no ridges at top of cylinders, and after soaking with lubricant for a couple days, rotate freely.

 Any feedback on validation and/or value, suggestions on how I can mate with original body, or interested buyers appreciated.


Thank you,

 John

miket1

  • Member
  • ***
  • Posts: 87
    • View Profile
Re: 69 DZ 302 V1I15DZ
« Reply #1 on: April 14, 2015, 07:49:28 PM »
Hi, the V11 15DZ is date, not vin,  the vin. should be on the pad before the date
69 Z28 Burgandy

SamsDZ

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: 69 DZ 302 V1I15DZ
« Reply #2 on: February 26, 2021, 10:18:57 PM »
I am new to this site but I think that is my missing motor, V1I15DZ. Wonder if you bought it from Bob who had it on Craigslist in 2012 as listed on this forum as well.
Sorry to dig up an old thread but this is very interesting.

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5947
    • View Profile
Re: 69 DZ 302 V1I15DZ
« Reply #3 on: March 01, 2021, 04:24:39 PM »
They made hundreds of blocks with that date, fwiw.
Kurt S
CRG

firstgenaddict

  • Hero Member
  • *****
  • Posts: 2882
  • caretaker of 1971 LT1's 11130 & 21783
    • View Profile
    • Groome Family Automobiles
Re: 69 DZ 302 V1I15DZ
« Reply #4 on: March 02, 2021, 08:18:04 PM »
The engine stamp shown above exhibits the same characteristics as the 2012 posting however it appears to be a different block. The 2012 posting appears to be not near as distinct or as deep of an impression as the one shown above.

Both have the same characters in the stamp - (which one would pretty much expect) however IMHO they appear to be different engines.
James
Collectin' Camaro's since "Only Rednecks drove them"
Current caretaker of 1971 LT1's - 11130 and 21783 Check out the Black 69 RS/Z28 45k mile Survivor and the Lemans Blue 69 Z 10D frame off...
https://plus.google.com/photos/112392262205377424364/albums?banner=pwa

SamsDZ

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: 69 DZ 302 V1I15DZ
« Reply #5 on: April 08, 2021, 07:02:08 PM »
Thanks for the info Firstgenaddict.

ban617

  • Member
  • ***
  • Posts: 222
    • View Profile
Re: 69 DZ 302 V1I15DZ
« Reply #6 on: April 12, 2021, 11:30:02 PM »
If the VIN isn’t on the pad wouldn’t it be on the bell housing flange ?

KGR

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: 69 DZ 302 V1I15DZ
« Reply #7 on: April 13, 2021, 03:37:25 PM »
FWIW, my 1I15DZ block has the partial VIN on the pad

ric1969

  • Member
  • ***
  • Posts: 58
    • View Profile
Re: 69 DZ 302 V1I15DZ
« Reply #8 on: April 14, 2021, 12:50:20 PM »
 KGR is yours LA or Norwood

KGR

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: 69 DZ 302 V1I15DZ
« Reply #9 on: April 19, 2021, 04:55:14 PM »
Norwood.

SamsDZ

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: 69 DZ 302 V1I15DZ
« Reply #10 on: July 15, 2021, 05:15:19 PM »
Here is some of the info on the motor I am looking for to reunite with my 69 Z28.


Posts: 4032
View Profile

Re: DZ302 craigslist
« Reply #1 on: June 27, 2012, 01:54:42 PM »
From the ad (and by the way, it's real, not a restamp):

DZ 1969 Camaro z/28 engine - $4950 (Plesanton)

ALL CORRECT 1969 CAMARO Z/28 ENGINE. LONG BLOCK, FRESH RE-BUILD. HERE'S THE INFO:
3932386 BLOCK, V1I15DZ ENGINE SUFFIX CODE, K 12 8 DATE CODE (NOV. 68') .040 11:1 PISTONS
#1178 10/10 CRANK, #186 (2.02) HEADS, #472 INTAKE, #682 WATER PUMP, $538 HARMONIC BALANCER.
THIS IS THE REAL DEAL AND OFFERED AT $4950.00. NO TRADES. CALL BOB @650-222-0780 7:00AM-7:00
PM ONLY PLEASE.
ALL YOU NEED TO COMPLETE IS ICONIC ENGNE IS A FUEL PUMP, STARTER,VALVE COVERS & DISTRIBUTOR.

I spoke to Bob ( the CL seller ), he sold the motor to a gentleman named Glen from Vallejo CA around 2012-2013 at the Good Guys show in Pleasanton CA. I think Bob said he was in the Petroleum business. Any ideas or leads would be much appreciated.