« previous next »
Pages: [1]

Author Topic: replacement hood hinge  (Read 2122 times)

bills69

  • Newbie
  • *
  • Posts: 9
    • View Profile
replacement hood hinge
« on: June 17, 2021, 12:38:24 PM »
what is a good hood hinges and latch  for a 69 Camaro with a cowl hood and the correct spring ?
worn and needs replacing too worn to refurbish


Logged

Stingr69

  • Hero Member
  • *****
  • Posts: 901
    • View Profile
Re: replacement hood hinge
« Reply #1 on: June 17, 2021, 12:46:14 PM »
Original good Nova hinge should be easy. 

Spring is same as stock flat hood.
Logged

bills69

  • Newbie
  • *
  • Posts: 9
    • View Profile
Re: replacement hood hinge
« Reply #2 on: June 17, 2021, 01:04:14 PM »
do you know the spring length , reading different info , had a goodmark set and hood would pop up , too strong a spring  want to get it right
Logged

x66 714

  • Hero Member
  • *****
  • Posts: 1788
    • View Profile
Re: replacement hood hinge
« Reply #3 on: June 17, 2021, 01:12:45 PM »
Logged
See America's First, Chevrolet

1968 Z/28 Corvette Bronze. Black Hounds Tooth. 02E Los Angeles born 3/13/1968 pnt OO. Purchased March 1976
1969 SS396 Yellow/Yellow 08E Norwood born 8/28/1969 pnt 76E. Purchased April 1981

bills69

  • Newbie
  • *
  • Posts: 9
    • View Profile
Re: replacement hood hinge
« Reply #4 on: June 17, 2021, 01:48:21 PM »
I have used the correct GM part number in my search and in some listings show different length than the GM part ?
does the shorter spring have less "tension"  the 9" that came with the goodmark was too strong
Logged

Sauron327

  • Hero Member
  • *****
  • Posts: 1366
    • View Profile
Re: replacement hood hinge
« Reply #5 on: June 17, 2021, 04:11:05 PM »
NOS GM # for SS springs is 3848272. I have them in stock and are readily available. Anybody who rebuilds hood hinges does as well. I do not buy repro hood or door hinges. I have many of mine rebuilt of all makes and models by Willie at HoodHingeRepair. Lost track of how many he he has done for me, not to mention referrals. I've been saving hinges for decades from parted out cars. Never use them all before I am dead.

Worn and can't be rebuilt is based on your observation.
Logged

Stingr69

  • Hero Member
  • *****
  • Posts: 901
    • View Profile
Re: replacement hood hinge
« Reply #6 on: June 17, 2021, 05:00:56 PM »
The hood hinges are just hard to align.  The alignment process for them is counterintuitive.  My advice is to leave the air cleaner extension ring off and adjust the front of the hinge "up".  I know that sounds crazy but the hood hinges are a bitch to get right.  Maybe we have a good body man here that will explain it better? 

The "SS"hood spring is wrong for the cowl induction hood (as shown in the link posted).
Logged

bills69

  • Newbie
  • *
  • Posts: 9
    • View Profile
Re: replacement hood hinge
« Reply #7 on: June 18, 2021, 02:33:19 PM »
agree SS wrong the 3877203 spring is correct and shorter . Does  the short spring have less tension in opening the hood  ?
Logged
Pages: [1]
« previous next »
 

anything