Author Topic: 68 Z exhaust  (Read 3660 times)

janobyte

  • Hero Member
  • *****
  • Posts: 1531
  • Before it was called Day 2 !
    • View Profile
68 Z exhaust
« on: March 28, 2020, 03:58:35 PM »
Didn't post the exhaust clamps, but, 1 7/8" stamped in the pass, no stamping but the driver's was clearly larger. Left them in the tumbler a day and polished. Look nice, zinc another day, wanted the exhaust hung. Also screws were clearly phosphated, no traces of zinc. The fit was superior to the vendor claimed "correct". Full closure, magic I guess.
68 Z/28  born with: 302, drive line, etc..

janobyte

  • Hero Member
  • *****
  • Posts: 1531
  • Before it was called Day 2 !
    • View Profile
Re: 68 Z exhaust
« Reply #1 on: March 28, 2020, 04:02:01 PM »
Old pics above, recent:
68 Z/28  born with: 302, drive line, etc..

janobyte

  • Hero Member
  • *****
  • Posts: 1531
  • Before it was called Day 2 !
    • View Profile
Re: 68 Z exhaust
« Reply #2 on: March 28, 2020, 04:05:15 PM »
More...
68 Z/28  born with: 302, drive line, etc..

janobyte

  • Hero Member
  • *****
  • Posts: 1531
  • Before it was called Day 2 !
    • View Profile
Re: 68 Z exhaust
« Reply #3 on: March 28, 2020, 04:07:24 PM »
...
68 Z/28  born with: 302, drive line, etc..

janobyte

  • Hero Member
  • *****
  • Posts: 1531
  • Before it was called Day 2 !
    • View Profile
Re: 68 Z exhaust
« Reply #4 on: March 28, 2020, 04:09:03 PM »
Hangers prior to cleaning up
68 Z/28  born with: 302, drive line, etc..

janobyte

  • Hero Member
  • *****
  • Posts: 1531
  • Before it was called Day 2 !
    • View Profile
Re: 68 Z exhaust
« Reply #5 on: March 28, 2020, 04:19:23 PM »
Some more magic: the pass tailpipe # shows in the pic, I cannot find it with the naked eye, picked it up totally by accident/luck.
68 Z/28  born with: 302, drive line, etc..

janobyte

  • Hero Member
  • *****
  • Posts: 1531
  • Before it was called Day 2 !
    • View Profile
Re: 68 Z exhaust
« Reply #6 on: March 28, 2020, 04:46:20 PM »
Meant tailpipe hanger clamps, not exhaust.
68 Z/28  born with: 302, drive line, etc..

firstgenaddict

  • Hero Member
  • *****
  • Posts: 2882
  • caretaker of 1971 LT1's 11130 & 21783
    • View Profile
    • Groome Family Automobiles
Re: 68 Z exhaust
« Reply #7 on: March 28, 2020, 06:30:19 PM »
Killer, I had a 200 mile 68 Z take off exhaust which went with my 68 RS/SS 396 when I sold it.
Good thing about original stuff is it is laminated (double layer pipe) which makes the tone less TINNY sounding.
James
Collectin' Camaro's since "Only Rednecks drove them"
Current caretaker of 1971 LT1's - 11130 and 21783 Check out the Black 69 RS/Z28 45k mile Survivor and the Lemans Blue 69 Z 10D frame off...
https://plus.google.com/photos/112392262205377424364/albums?banner=pwa

janobyte

  • Hero Member
  • *****
  • Posts: 1531
  • Before it was called Day 2 !
    • View Profile
Re: 68 Z exhaust
« Reply #8 on: March 28, 2020, 07:36:30 PM »
Learn something every day, noticeably heavier vs. the repop.
68 Z/28  born with: 302, drive line, etc..

68camaroz28

  • Hero Member
  • *****
  • Posts: 2233
    • View Profile
Re: 68 Z exhaust
« Reply #9 on: March 31, 2020, 09:00:47 PM »
Excellent pics and that exhaust system would be most difficult to replicate original wise. Great job!
Chick
68 Z/28 NOR 01B Orig motor/trans/rear
69 Z/28 NOR 07A Orig Block & GM Cross-ram/carbs
69 L34 Rest. Nova Father/Son Car
69 L78 Surv Nova Purch 4/69 31K miles
67 L89 Corv Tribute
68 Corv 427/400 Orig motor
07 Corv Z06
R 68Z build- http://www.camaros.net/forums/showthread.php?t=182584

BRG Z28

  • Member
  • ***
  • Posts: 117
    • View Profile
Re: 68 Z exhaust
« Reply #10 on: March 31, 2020, 09:25:18 PM »
I have a NOS 68 Z exhaust. They have the part numbers on the pipes.

janobyte

  • Hero Member
  • *****
  • Posts: 1531
  • Before it was called Day 2 !
    • View Profile
Re: 68 Z exhaust
« Reply #11 on: March 31, 2020, 10:08:58 PM »
Not an nos, it's the born with exhaust for this car.
68 Z/28  born with: 302, drive line, etc..

janobyte

  • Hero Member
  • *****
  • Posts: 1531
  • Before it was called Day 2 !
    • View Profile
Re: 68 Z exhaust
« Reply #12 on: March 31, 2020, 10:30:29 PM »
Thanks Chick, I didn't love it, and the car fought me alittle not wanting it back under. But, was the only real stand back moment I had throughout the build. Milemarker
68 Z/28  born with: 302, drive line, etc..

cook_dw

  • Hero Member
  • *****
  • Posts: 3985
    • View Profile
Re: 68 Z exhaust
« Reply #13 on: April 04, 2020, 01:15:05 PM »
Steve’s Z on start up.  Sounds great btw.


https://youtu.be/CFv3AeLi5n8