1969 broardsheet codes 5AO14A and 5Z11AA ?

[ZLP955]

Body number (from the trim tag) would be unique to a LOS-built car, or do you mean a firewall crayon sequence number, often 3 digits?

[69Z28-RS]

The 'crayon marking' as the body moves thru the plant is generally referred to as 'sequence number'... as in my Camaro has '18' on the LHS shoulder (under the fender)...

[william]

Body number (from the trim tag) would be unique to a LOS-built car, or do you mean a firewall crayon sequence number, often 3 digits?

Not for 1969. Both plants were on the same order entry system.

[ZLP955]

Not for 1969. Both plants were on the same order entry system.

Yep that didn't come across as intended; what I meant was that LOS production ended well before NOR production saw the body numbers reset around the (anticipated) end of model year, and so there couldn't be 2 LOS '69 Camaros with the same body number, unlike NOR.

[wono427]

Hi I am referring to the one letter 3 numbers stamped
on the body tag , not the body VN number on the same tag
On The damaged broadsheet I have , the box before where the serial number would be looks to have the same 3 numbers but no letter
It very hard to see and am trying to get better photos
To post
Thanks for the help

[69Z28-RS]

Would that be the projected build week??

[wono427]

P165 is the stamping  on trim tag -build date is 24/4/1969 from NCRS
??

[ZLP955]

LOS Body scheduling code: http://www.camaros.org/numbers.shtml#b

[69Z28-RS]

P165 =    P represents the 21st of April (assuming April is the month the body was built);  The 21st of April is the 16th production day (corresponding to the P).    165th body to be built that day...   so body was built 3 days prior to final auto assembly completion day (24 April)...

if I did this right??   I don't normally see LOS cars in my area... 

[bcmiller]

P165 is the stamping  on trim tag -build date is 24/4/1969 from NCRS
??

Approximately 16th day of production for the month.  165th body for the day.

[69Z28-RS]

You're right Bryon!~   

seems I can't count on my fingers!! 

I corrected my post...

[bcmiller]

It’s ok Gary, I had to check and then re-check myself - twice!

[firstgenaddict]

In the Engine RPO box there is a single letter... should be a G.
G = 302

[wono427]

Can’t read RPO box

[wono427]

trying to read sequence numer box