Author Topic: Cranks and Cams  (Read 6514 times)

dab67

  • Member
  • ***
  • Posts: 460
  • 67 SS
    • View Profile
Cranks and Cams
« on: November 29, 2005, 01:38:11 AM »
 ::)Can anyone tell me the correct part number combination for crank and cam used in the 67 350 295hp? I found on Mortec, 8 different cranks for the 350 but nothing on the cam. Plus I could not find info regarding the application for the cranks. Thanks CRG!!!!!!!!!!!!!!!

JohnZ

  • CRG Member
  • *****
  • Posts: 4365
    • View Profile
Re: Cranks and Cams
« Reply #1 on: November 29, 2005, 04:15:40 PM »
I believe the cam is the same one that was used across all Chevrolet products from '67-'81 for the 300hp-level 327 and 350 engines; the "929" cam - GM#3896929 (casting #3896930). It had 195*/202* duration @ .050", and .390"/.410" lift. It's still available from GM under P/N 12364051 as a kit with cam and lifters for $100-$140 depending on where you buy it.  :)
'69 Z/28
Fathom Green
CRG

dab67

  • Member
  • ***
  • Posts: 460
  • 67 SS
    • View Profile
Re: Cranks and Cams
« Reply #2 on: November 29, 2005, 10:39:23 PM »
 ;DThank you John for the input.

 Would the correct crankshaft be a forged like the 2690 or a cast like the 1181?

dab67

JohnZ

  • CRG Member
  • *****
  • Posts: 4365
    • View Profile
Re: Cranks and Cams
« Reply #3 on: November 30, 2005, 03:59:22 PM »
I'd expect to find a cast crank in a '67 350/295hp.; I believe the only Camaro small-block with a forged crank was the Z/28.
'69 Z/28
Fathom Green
CRG