« previous next »
Pages: 1 2 [3] 4 5 ... 9  All

Author Topic: Body Mount Tape - Width  (Read 43096 times)

Danzo

  • Member
  • ***
  • Posts: 474
    • View Profile
Re: Body Mount Tape - Width
« Reply #30 on: December 30, 2018, 03:41:28 PM »
Logged

Edgemontvillage

  • Hero Member
  • *****
  • Posts: 788
    • View Profile
Re: Body Mount Tape - Width
« Reply #31 on: December 30, 2018, 04:34:51 PM »
Logged

Mike S

  • Hero Member
  • *****
  • Posts: 2666
    • View Profile
Re: Body Mount Tape - Width
« Reply #32 on: December 30, 2018, 05:24:34 PM »
 Looks like what I bought from AMK, but a few dollars cheaper.
Logged
67 04B LOS SS/RS L35 Hardtop - Original w/UOIT
67 05B NOR SS/RS L35 Convertible - Restored

Hans L

  • Member
  • ***
  • Posts: 380
    • View Profile
Re: Body Mount Tape - Width
« Reply #33 on: December 31, 2018, 01:19:51 AM »
I remember reading about this some years ago, but found no signs of tape when I removed the subframe from my '69 LA built Camaro. 

Does anyone know if by chance the LA plant in '69 may have removed the tape prior to attaching the subframe?     Good news I was planning on attaching the subframe in the next few days...still time to add the tape.
Logged
https://www.instagram.com/69camarorsz28/
'69 Camaro RS Z/28 Van Nuys Built
'69 Chevelle SS 396 4 Speed

Mike S

  • Hero Member
  • *****
  • Posts: 2666
    • View Profile
Re: Body Mount Tape - Width
« Reply #34 on: December 31, 2018, 02:42:02 AM »
 I just checked my 04B 67 LOS and there is absolutely no indication of tape.
Unless it was removed prior to installing the chassis, maybe GMAD operated differently?

LLoyd, how much tape do you need?

Mike
Logged
67 04B LOS SS/RS L35 Hardtop - Original w/UOIT
67 05B NOR SS/RS L35 Convertible - Restored

Edgemontvillage

  • Hero Member
  • *****
  • Posts: 788
    • View Profile
Re: Body Mount Tape - Width
« Reply #35 on: December 31, 2018, 03:29:32 AM »
The body mounts are 2 1/2” in diameter and you want about 1” over on either side so call it 5” per side x 2 sides so 10 inches of tape does it. 
Logged

Mike S

  • Hero Member
  • *****
  • Posts: 2666
    • View Profile
Re: Body Mount Tape - Width
« Reply #36 on: December 31, 2018, 03:38:29 AM »
If you PM me your address I can send you a couple of feet.

Mike
Logged
67 04B LOS SS/RS L35 Hardtop - Original w/UOIT
67 05B NOR SS/RS L35 Convertible - Restored

Edgemontvillage

  • Hero Member
  • *****
  • Posts: 788
    • View Profile
Re: Body Mount Tape - Width
« Reply #37 on: December 31, 2018, 04:58:10 AM »
Quote from: Mike S on December 31, 2018, 03:38:29 AM
If you PM me your address I can send you a couple of feet.

Mike

Thanks Mike!
Logged

68camaroz28

  • Hero Member
  • *****
  • Posts: 2233
    • View Profile
Re: Body Mount Tape - Width
« Reply #38 on: January 02, 2019, 10:51:16 PM »
Quote from: Edgemontvillage on December 30, 2018, 02:55:22 AM
 

Chick I couldn't help but notice the bushing in your photo appears to have the integrated washer which would be the 3928380 instead of the 3901361 bushing or is that camera flash?
Dang it Lloyd now you ruined my new Year..... LOL I'm not sure how that has happened as I'm confident I had all my biscuits and donuts all lined up by part # for the sub-frame as the owner I purchased the car from had already bought them and I checked all those against the AIM but it sure would look like I must have screwed up and will have to examine that. 
Logged
Chick
68 Z/28 NOR 01B Orig motor/trans/rear
69 Z/28 NOR 07A Orig Block & GM Cross-ram/carbs
69 L34 Rest. Nova Father/Son Car
69 L78 Surv Nova Purch 4/69 31K miles
67 L89 Corv Tribute
68 Corv 427/400 Orig motor
07 Corv Z06
R 68Z build- http://www.camaros.net/forums/showthread.php?t=182584

Hans L

  • Member
  • ***
  • Posts: 380
    • View Profile
Re: Body Mount Tape - Width
« Reply #39 on: January 03, 2019, 05:35:56 PM »
Quote from: 68camaroz28 on January 02, 2019, 10:51:16 PM
Quote from: Edgemontvillage on December 30, 2018, 02:55:22 AM
 

Chick I couldn't help but notice the bushing in your photo appears to have the integrated washer which would be the 3928380 instead of the 3901361 bushing or is that camera flash?
Dang it Lloyd now you ruined my new Year..... LOL I'm not sure how that has happened as I'm confident I had all my biscuits and donuts all lined up by part # for the sub-frame as the owner I purchased the car from had already bought them and I checked all those against the AIM but it sure would look like I must have screwed up and will have to examine that. 

Chick - Well - appears you had the right body mount bushing here:  http://www.camaros.org/forum/index.php?topic=7497.0.   
Logged
https://www.instagram.com/69camarorsz28/
'69 Camaro RS Z/28 Van Nuys Built
'69 Chevelle SS 396 4 Speed

Edgemontvillage

  • Hero Member
  • *****
  • Posts: 788
    • View Profile
Re: Body Mount Tape - Width
« Reply #40 on: January 03, 2019, 06:31:29 PM »
Quote from: Hans L on January 03, 2019, 05:35:56 PM
Quote from: 68camaroz28 on January 02, 2019, 10:51:16 PM
Quote from: Edgemontvillage on December 30, 2018, 02:55:22 AM

Chick I couldn't help but notice the bushing in your photo appears to have the integrated washer which would be the 3928380 instead of the 3901361 bushing or is that camera flash?
Dang it Lloyd now you ruined my new Year..... LOL I'm not sure how that has happened as I'm confident I had all my biscuits and donuts all lined up by part # for the sub-frame as the owner I purchased the car from had already bought them and I checked all those against the AIM but it sure would look like I must have screwed up and will have to examine that. 

Chick - Well - appears you had the right body mount bushing here:  http://www.camaros.org/forum/index.php?topic=7497.0.   


Hans, none of the factory installed 3901361 bushings I have seen use an integrated washer, it might be a later service replacement bushing that Chick has and, as we have seen frequently, NOS / service replacement and assembly line originals, are often different. 
Logged

Hans L

  • Member
  • ***
  • Posts: 380
    • View Profile
Re: Body Mount Tape - Width
« Reply #41 on: January 03, 2019, 06:39:11 PM »
Quote from: Edgemontvillage on January 03, 2019, 06:31:29 PM
Quote from: Hans L on January 03, 2019, 05:35:56 PM
Quote from: 68camaroz28 on January 02, 2019, 10:51:16 PM
Quote from: Edgemontvillage on December 30, 2018, 02:55:22 AM

Chick I couldn't help but notice the bushing in your photo appears to have the integrated washer which would be the 3928380 instead of the 3901361 bushing or is that camera flash?
Dang it Lloyd now you ruined my new Year..... LOL I'm not sure how that has happened as I'm confident I had all my biscuits and donuts all lined up by part # for the sub-frame as the owner I purchased the car from had already bought them and I checked all those against the AIM but it sure would look like I must have screwed up and will have to examine that. 

Chick - Well - appears you had the right body mount bushing here:  http://www.camaros.org/forum/index.php?topic=7497.0.   


Hans, none of the factory installed 3901361 bushings I have seen use an integrated washer, it might be a later service replacement bushing that Chick has and, as we have seen frequently, NOS / service replacement and assembly line original, are often different. 

Interesting.  I'll check the originals I removed from the car and confirm.  I installed the older NOS version recently.  I assume you can't remove the integrated washer?
Logged
https://www.instagram.com/69camarorsz28/
'69 Camaro RS Z/28 Van Nuys Built
'69 Chevelle SS 396 4 Speed

Mike S

  • Hero Member
  • *****
  • Posts: 2666
    • View Profile
Re: Body Mount Tape - Width
« Reply #42 on: January 03, 2019, 06:44:19 PM »
Lloyd, 
   I'm a little confused, are you saying the integrated washer (I assume you mean the metal against the floor) was not on original bushings?

Mike
Logged
67 04B LOS SS/RS L35 Hardtop - Original w/UOIT
67 05B NOR SS/RS L35 Convertible - Restored

Edgemontvillage

  • Hero Member
  • *****
  • Posts: 788
    • View Profile
Re: Body Mount Tape - Width
« Reply #43 on: January 03, 2019, 07:01:26 PM »
Quote from: Mike S on January 03, 2019, 06:44:19 PM
Lloyd, 
   I'm a little confused, are you saying the integrated washer (I assume you mean the metal against the floor) was not on original bushings?

Mike

Mike, from my observations, the upper bushing in Position #3 did not have the integrated washer, there was not a metal bushing washer against the floor pan.   
Logged

Edgemontvillage

  • Hero Member
  • *****
  • Posts: 788
    • View Profile
Re: Body Mount Tape - Width
« Reply #44 on: January 03, 2019, 07:19:33 PM »
Interesting.  I'll check the originals I removed from the car and confirm.  I installed the older NOS version recently.  I assume you can't remove the integrated washer?



Hans, if memory serves, bushings with the integrated washer are of a different design and meant to interlock with the non integrated washer bushings (eg 361 with the 380). I don't think the integrated washer was designed to be removed.
Logged
Pages: 1 2 [3] 4 5 ... 9  All
« previous next »
 

anything