Author Topic: Factory Power steering box  (Read 2833 times)

VINCE Z28

  • Hero Member
  • *****
  • Posts: 760
    • View Profile
Factory Power steering box
« on: November 16, 2018, 08:33:17 AM »
Was the Power steering box on a 1969 camaro, from the factory painted or bare metal?
" He who knows naught, knows not that he knows naught"  It's not you...  It's just the way my brain is wired.

ZLP955

  • Hero Member
  • *****
  • Posts: 2186
    • View Profile
Re: Factory Power steering box
« Reply #1 on: November 16, 2018, 11:58:32 AM »
As far as I'm aware, steering boxes were unpainted cast iron.
Tim in Australia.
1969 04A Van Nuys Z/28. Cortez Silver, Dark Blue interior, VE3, Z21, Z23, D55/U17, D80, flat hood.
Sold at Clippinger Chevrolet in Covina, CA.
AHRA Formula Stock at Lions Dragstrip, NHRA E/MP at Pomona Raceway

VINCE Z28

  • Hero Member
  • *****
  • Posts: 760
    • View Profile
Re: Factory Power steering box
« Reply #2 on: November 16, 2018, 04:15:07 PM »
Thanks Tim.
" He who knows naught, knows not that he knows naught"  It's not you...  It's just the way my brain is wired.

BillG

  • Member
  • ***
  • Posts: 148
    • View Profile
Re: Factory Power steering box
« Reply #3 on: November 16, 2018, 11:56:04 PM »
Vince; Tim is much more knowledgable than me but, I've always heard taht steering gear boxes were painted from Saginaw a specific slate blue color.  I'll see if I can find more on it.
Bill Garrett

169INDY

  • Hero Member
  • *****
  • Posts: 1786
    • View Profile
Re: Factory Power steering box
« Reply #4 on: November 17, 2018, 12:05:05 AM »
Follow the Corvette judging stds"?
Jim
68 SS/RS L35 Th-400 LOS
69 Pace Car L48 Th-350 LOS
68 Z28 M21 LOS

Edgemontvillage

  • Hero Member
  • *****
  • Posts: 784
    • View Profile
Re: Factory Power steering box
« Reply #5 on: November 26, 2018, 07:02:04 PM »
Was the Power steering box on a 1969 camaro, from the factory painted or bare metal?

From my experience most all components of the power steering unit are "natural" including the case, inspection cover, backlash adjuster screw & lock-nut and the input shaft. The exceptions are the output shaft splines (pitman) are copper plated and the access cover bolts are manganese phosphated.

Kelley W King

  • Hero Member
  • *****
  • Posts: 1410
    • View Profile
Re: Factory Power steering box
« Reply #6 on: November 26, 2018, 08:39:10 PM »
I have seen some restorations that were natural with some paint marks on them.
69 Z28 RS Scuncio Hi Performance
69 SS L78
67 SS Chevelle
64 Corvette
66 GTO Tiger Gold
77 Trans Am Special Edition

 

anything