Author Topic: identification  (Read 9325 times)

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5884
    • View Profile
Re: identification
« Reply #15 on: April 04, 2018, 08:31:43 AM »
I saw that another guy got his vin  decoded so I thought my vin might have some info other than the basics.
That was a lookup of the VIN to find an ad for the car. And the tag was in the ad..... Nothing magical.
Kurt S
CRG

bcmiller

  • CRG Member
  • *****
  • Posts: 4011
    • View Profile
Re: identification
« Reply #16 on: April 04, 2018, 08:46:09 AM »
it's got the original drive train from engine to axel
numbers match the vin. multi leaf rear end 4 speed 350 300 hp

What else would you want? You also have the build month and week, original interior and exterior colors shown on the trim tag.

The section at this link might be helpful.

http://www.camaros.org/diffs69.shtml



Bryon / 1968 Camaro SS 396 coupe - now old school 468 big block
1967 Camaro RS/SS 396 coupe L35/M40 - 4 generation family project
Looking for 68 Camaro with body # NOR 181016

JKZ27

  • Hero Member
  • *****
  • Posts: 559
    • View Profile
Re: identification
« Reply #17 on: April 04, 2018, 10:44:47 AM »
Now that your car has been identified, how about posting some pics? I think we'd enjoy seeing the car.
John
69 RS/SS Cortez Silver, L48 MC1
68 RS Ash/Ivy Gold 327EFI M20

Ohioscott

  • Member
  • ***
  • Posts: 26
    • View Profile
Re: identification
« Reply #18 on: April 04, 2018, 11:59:17 AM »
thanks for the info

Kelley W King

  • Hero Member
  • *****
  • Posts: 1410
    • View Profile
Re: identification
« Reply #19 on: April 04, 2018, 12:14:36 PM »
Gary,
Since you are estimating day of the week. What day would my 12A N557961 be?
69 Z28 RS Scuncio Hi Performance
69 SS L78
67 SS Chevelle
64 Corvette
66 GTO Tiger Gold
77 Trans Am Special Edition

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5778
  • owner since 4-Apr-1976
    • View Profile
Re: identification
« Reply #20 on: April 04, 2018, 03:22:32 PM »
Kelley,  actually I estimate 'production day' based on uniform production during the month of December, and then check the production days for the month of production.  Your car would have come off the line late on a Tuesday (10 Dec), or early on Wednesday (11 Dec) - ie. 7th or 8th production day.  If you have your NCRS production report, check this estimate against what your report says.
« Last Edit: April 04, 2018, 03:51:23 PM by 69Z28-RS »
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

cook_dw

  • Hero Member
  • *****
  • Posts: 3981
    • View Profile
Re: identification
« Reply #21 on: April 04, 2018, 04:39:23 PM »
http://www.camaros.org/geninfo.shtml#When

https://www.timeanddate.com/calendar/?year=1968&country=1


Then do the math and it'll usually get you close.  He's not gonna have a report to look at.


Kelley W King

  • Hero Member
  • *****
  • Posts: 1410
    • View Profile
Re: identification
« Reply #22 on: April 04, 2018, 05:33:08 PM »
True about the report. Vin fits the NCRS black hole. Garys estimate is close enough for me. It seems that 12A cars are popular in the posts.
69 Z28 RS Scuncio Hi Performance
69 SS L78
67 SS Chevelle
64 Corvette
66 GTO Tiger Gold
77 Trans Am Special Edition

Ohioscott

  • Member
  • ***
  • Posts: 26
    • View Profile
Re: identification
« Reply #23 on: April 12, 2018, 12:24:26 AM »
restored around 1978

BULLITT65

  • Hero Member
  • *****
  • Posts: 4476
    • View Profile
Re: identification
« Reply #24 on: April 13, 2018, 01:09:02 AM »
Thats funny. I can't imagine restoring a car that is only ten years old now a days.

So even in 1978  these cars were considered special enough to restore?
1969 garnet red Z/28 46k mile unrestored X77
-Looking for 3192477 (front) spiral shocks 3192851 (rear)
-Looking for an original LOF soft ray windshield
-Looking for original Delco side post negative battery cable part # 6297651AV

rick 67

  • Member
  • ***
  • Posts: 98
    • View Profile
Re: identification
« Reply #25 on: April 13, 2018, 02:07:08 AM »
 Lace paint jobs were old news, fender flares and shoe box hood scoops were garish. Gas prices forced most to be put away. The first inkling they might be valuable as #s matching original cars was becoming known. Northern cars such Ohioscott's probably had some early rust issues from being winter driven. My 69 had its first paint job in 1974 that I know of. One thing I can tell you before the internet parts were very hard to find.

 Rick

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5778
  • owner since 4-Apr-1976
    • View Profile
Re: identification
« Reply #26 on: April 13, 2018, 04:05:55 AM »
when I purchased my '69 in April 1976, I immediately went to the Chevrolet dealer and ordered all the trim/etc parts I thought I might replace when I 'restored' the car; at the time I thought I might do a restore in 2,3, or 4 years, but instead the car was garaged for 38 yrs instead... and my plan changed to 'preservation' rather than restoration over that time fram

I knew to purchase parts from Chevrolet even though the car was only 7 yrs old at the time because I'd gone thru the same process with my '55 Nomad (of looking for parts in junkyards, etc) before learning that even 20 yrs later Chevy still had some parts for them... so I thought to buy what I could as early as possible.  I think lots of people learned that lesson also, as most parts for special interest cars *like Camaros* disappeared quickly from Chevy's shelves by people buying them up for later resale... thus the high prices for NOS parts nowadays!
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

Ohioscott

  • Member
  • ***
  • Posts: 26
    • View Profile
Re: identification
« Reply #27 on: April 13, 2018, 11:29:06 AM »
mine had the typical ohio rust. and at that time I was able to get all the gm sheet metal except the outer rear fender wells. I think what helped me was I had a 69 buick stage 1 car when i was 16. it needed a cam so I got it running only to blow it up months later. it was at that time I started to realize the value of these cars. A replacement RS code buick engine could never be found. so when the camaro came along I got as much parts nos as possible. they were cheap. most dealers offered a 20 percent discount  for guys restoring cars.

ko-lek-tor

  • Hero Member
  • *****
  • Posts: 1858
  • someday I'll get one finished
    • View Profile
Re: identification
« Reply #28 on: April 13, 2018, 02:07:27 PM »
Thats funny. I can't imagine restoring a car that is only ten years old now a days....So even in 1978  these cars were considered special enough to restore?
Silly Austin, only if it was H.O. It was worth restoring.

Seriously, from my perspective (and probably Gary and others) having bought my car in 79’, these 1st gens. never fell out of favor, like some other years or models. There has seemingly always nbeen a lot of interest, even way back, in fixing up these cars. That is probably why so many parts were available over the counter from Chevy BITD?!  That is how I ended up with 2 cars in 79. I wanted to fix one up to show. Back then, it was cheaper to buy a new fender than to fix a small hole. That is how my car (SS 350) got taken apart and sold off the original doghouse (regrets), and bought new sheet metal. The vast amount of parts available were one reason the car’s popularity persisted, even after 10 years! How many other cars can you say that for? The parts manager who was my connection for getting GM parts from (at cost, I’ll add),  back then, had a 69 Z. I’ll never forget going over to his house with a buddy. In his basement were shelves And shelves of new 69 parts. On his lunch hour he would go through the parts books and order any part still available for a 69, he told me. He had A LOT of parts (maybe more than the dealer)all categorized in bins. He was in the middle of a divorce and was selling off stuff. My buddy bought the whole drivetrain and put it in a 68 RS. I rebuilt the DZ engine for him. Before he sold my buddy the engine, he offered everything to us including his just painted body shell ( Cortez Silver) for 3 grand! A deal even then.
Bentley to friends :1969 SS/RS 396 owned 79
1969 SS 350 (sold)
1969 D.H.COPO replica 4spd. owned since 85
1967 302 4 spd 5.13