Author Topic: Chassis Broadcast Sheet  (Read 20301 times)

jdv69z

  • Hero Member
  • *****
  • Posts: 1275
  • 69 RS Z/28 52E
    • View Profile
Chassis Broadcast Sheet
« on: February 21, 2017, 04:41:34 PM »
So I know finding the body broadcast sheet in a 69 Norwood built Camaro is very rare. How often do chassis broadcast sheets turn up? It seems like these would never have been in the car since they traveled with the chassis assembly. Only one I have seen a copy of is ZL-1 #2. Does the CRG group have many of these?
Jimmy V.

william

  • CRG Member
  • *****
  • Posts: 3119
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #1 on: February 21, 2017, 05:11:50 PM »
Quoting from John Z's excellent article about 1st Gen Camaro assembly:

By the time the car got to the Final Line there were Broadcast Copies all over it, under it, and inside it, as all the various feeder lines used them too. Each installation point for conveyor-delivered components had a trash barrel to pitch the copy that came taped to the subassembly, and there were several at the end of the Final Line.

I have been involved with 1st Gens going on 42 years. Maybe I have seen a couple dozen Norwood Broadcast Copies in that time; Kurt has more experience with them. I have a real one [not a copy] that was in the folder with other paperwork from the cars' delivery. Sometimes they were retained during new car prep, most often discarded. They were generated by Chevrolet when the assembled body was in queue for release to final assembly. As received, about 90% of the interior was installed by Fisher Body; no need to remove trim panels or look inside the seats.

http://www.camaros.org/assemblyprocess.shtml

Learning more and more about less and less...

BULLITT65

  • Hero Member
  • *****
  • Posts: 4476
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #2 on: February 21, 2017, 07:15:34 PM »
I have seen about a dozen or so 69 norwood cars on ebay over the years with the broadcast sheet. I have often wondered where these were found on the car. I have heard inside door panels, under the rear seat, under the carpet, and in the headliner. Maybe it could have been in all those areas, if it was just floating around at that point.
1969 garnet red Z/28 46k mile unrestored X77
-Looking for 3192477 (front) spiral shocks 3192851 (rear)
-Looking for an original LOF soft ray windshield
-Looking for original Delco side post negative battery cable part # 6297651AV

jdv69z

  • Hero Member
  • *****
  • Posts: 1275
  • 69 RS Z/28 52E
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #3 on: February 21, 2017, 09:50:49 PM »
Wouldn't those typically be the body broadcast sheet, as opposed to the chassis sheet? I can see assembly lines workers using the body broadcast sheets inside the car, but wouldn't the chassis broadcast sheets be with the chassis assembly prior to the body/chassis marriage? And if left at all, be located somewhere on the chassis outside the car?
Jimmy V.

william

  • CRG Member
  • *****
  • Posts: 3119
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #4 on: February 21, 2017, 10:01:07 PM »
I have heard inside door panels, under the rear seat, under the carpet, and in the headliner. Maybe it could have been in all those areas, if it was just floating around at that point.

Mostly BS. Broadcast Copies did not exist when Fisher Body was installing the interior. Fisher did not install the front carpeting so the possibility exists one could have been left there. Have yet to hear of one though.

Fisher had its own docs and although very rare, they have turned up inside headliners and under carpeting.



Learning more and more about less and less...

william

  • CRG Member
  • *****
  • Posts: 3119
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #5 on: February 21, 2017, 10:09:59 PM »
Wouldn't those typically be the body broadcast sheet, as opposed to the chassis sheet? I can see assembly lines workers using the body broadcast sheets inside the car, but wouldn't the chassis broadcast sheets be with the chassis assembly prior to the body/chassis marriage? And if left at all, be located somewhere on the chassis outside the car?

From John Zs article:

The "Broadcast Copy" (often called the "build sheet" today) included the sequence number, VIN, identification number, dealer code, order number, and selection codes for virtually every part that went on that car. There were two types of Broadcast Copies: the Body Broadcast Copy (BBC) was used on the Trim Line and Final Line, and the Chassis Broadcast Copy (CBC) was used on the Engine Dress, Chassis, and post-marriage overhead Chassis Line. There was some level of duplication on both Broadcast Copies, which were standard Chevrolet forms used in most Chevrolet plants.

The workers at Norwood were very good at removing and discarding Broadcast Copies.



Learning more and more about less and less...

BULLITT65

  • Hero Member
  • *****
  • Posts: 4476
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #6 on: February 21, 2017, 10:11:46 PM »
Ok so you obviously have seen a lot more docs found. Where does the broadcast copy tend to be located on a norwood car if at all?
Where are some of popular spots to locate any docs fisher/chevrolet on a car you suspect has never been torn apart?
thanks
1969 garnet red Z/28 46k mile unrestored X77
-Looking for 3192477 (front) spiral shocks 3192851 (rear)
-Looking for an original LOF soft ray windshield
-Looking for original Delco side post negative battery cable part # 6297651AV

william

  • CRG Member
  • *****
  • Posts: 3119
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #7 on: February 21, 2017, 11:50:04 PM »
Wrong impression. It is very rare to find production documentation in a Norwood car. Back in the '80s I probably dismantled a few dozen and never found anything. The Gibb ZL1 BCs exist because they were left inside the car and he saved them. Apparently that was common but most dealers discarded them during prep.

I had a 1970 Chevelle fairly new; there were BCs in the seat springs and stuck inside the front fenders. I suspect that is where these rumors come from but they do not apply to Norwood Camaros.
Learning more and more about less and less...

68camaroz28

  • Hero Member
  • *****
  • Posts: 2232
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #8 on: February 22, 2017, 01:47:26 AM »
Thanks Bill for some excellent information.
I'd like to share what we found in our Nova where many build sheets were commonly found. Our son's L34 Nova was restored and what was found was actually two build sheets. We believe by the last digit of the build it might have been two cars prior and had very few options but there we had it, our Nova build sheet along with another cars. They were tucked in the bottom of the back seat and the top one is son's car and the bottom car is a red with black std. bench. Note the sequence # 226 vs ??4, hence the thinking it might have been two cars before.
Chick
68 Z/28 NOR 01B Orig motor/trans/rear
69 Z/28 NOR 07A Orig Block & GM Cross-ram/carbs
69 L34 Rest. Nova Father/Son Car
69 L78 Surv Nova Purch 4/69 31K miles
67 L89 Corv Tribute
68 Corv 427/400 Orig motor
07 Corv Z06
R 68Z build- http://www.camaros.net/forums/showthread.php?t=182584

z28z11

  • Hero Member
  • *****
  • Posts: 1853
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #9 on: February 22, 2017, 01:54:51 AM »
I also owned a '70 LS5 Chevelle up until 2011 - during my attempt to sell it on eBay, some kind enthusiast let me know that Atlanta built Chevelles like mine had the broadcast copy glued to the back of the door panel (the only place I had not looked for it). To my very great relief, the copy was right there, absolutely perfect condition, glued very firmly to the door panel, with every last detail including the shipping info, dealer code, dealer and LS5 documentation that I needed to prove out the car: the dream of all of our collective Norwood production fellow Camaro owners. Although I have the dealer invoices on two of my Camaros (luckily the '68 Z is one of those two), I wish all of them had the BC's as well.

Keep on looking -

Steve
1968 Z28 M21/U17 BRG/W 1967 Chevy ll Nova SS 
1969 Z28 X77/M20/VE3 LeMans/W
1969 L78 X66/N66 Cortez/BVT
1969 Z11 L48/M35/C60/C06  1949 3100 5wd 235/6

JKZ27

  • Hero Member
  • *****
  • Posts: 559
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #10 on: February 22, 2017, 02:23:39 AM »
I found one under the back seat of a 1968 LOS Firebird that I had. Not that uncommon for LOS, I believe. I also found one in my Norwood built 1979 Z28 but I guess a lot changes in a plant in 10 years.
I still see them in new Buicks and GMCs taped to the seat or in the trunk and they go in the trash.
John
69 RS/SS Cortez Silver, L48 MC1
68 RS Ash/Ivy Gold 327EFI M20

z28z11

  • Hero Member
  • *****
  • Posts: 1853
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #11 on: February 22, 2017, 02:32:57 AM »
I bought an '85 Z new, had one tucked up under the driver's seat springs. Still have it, but it's very different from the early ones. At least it lent some credence to the "under the seat" theories -

Steve
1968 Z28 M21/U17 BRG/W 1967 Chevy ll Nova SS 
1969 Z28 X77/M20/VE3 LeMans/W
1969 L78 X66/N66 Cortez/BVT
1969 Z11 L48/M35/C60/C06  1949 3100 5wd 235/6

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5884
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #12 on: February 22, 2017, 02:41:05 AM »
It is very rare to find production documentation in a Norwood car. The Gibb ZL1 BCs exist because they were left inside the car and he saved them. Apparently that was common but most dealers discarded them during prep.
Agreed. Very low chance that docs are in the car waiting to be found (except 69 LOS cars).
Dealers either discarded the copies in the car or put them in the dealership's new car file.
Kurt S
CRG

stovebolt

  • Member
  • ***
  • Posts: 200
  • 1968 L6 Sport Coupe
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #13 on: February 22, 2017, 09:14:28 PM »
In 1972 I bought a brand new Buick Skylark coupe. While on the lift for it's first oil change, I walked around the car checking out the chassis and found the broadcast sheet tucked in a frame slot just in front on the rear bumper. Of course, nobody cared back then.

william

  • CRG Member
  • *****
  • Posts: 3119
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #14 on: February 22, 2017, 10:14:53 PM »
Heard that the Corvette plant puts a build sheet in a bag and tucks it into the frame somewhere.
Learning more and more about less and less...

rare396bronze

  • Member
  • ***
  • Posts: 281
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #15 on: February 23, 2017, 02:34:23 AM »
I have parted out many 67-69 Camaro's never seen build sheets in any of the cars. But have a 68 plain  Camaro that my better half bought brand new that the dealer gave her both build sheets plus shipper paperwork which is pretty cool. I  did have 80 z28 that I found the build sheet under the left rear seat. I also had a friend that had a 71 Camaro that found his sheet under rear seat also.

BULLITT65

  • Hero Member
  • *****
  • Posts: 4476
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #16 on: February 23, 2017, 02:58:40 AM »
so how much could have changed from 68,& 69 to 71 . I would think while finding the paperwork may be rare, that if it does exist, under the back seat may be a good spot to look.
1969 garnet red Z/28 46k mile unrestored X77
-Looking for 3192477 (front) spiral shocks 3192851 (rear)
-Looking for an original LOF soft ray windshield
-Looking for original Delco side post negative battery cable part # 6297651AV

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5884
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #17 on: February 23, 2017, 03:02:05 AM »
under the back seat may be a good spot to look.
Did you not see what William posted about Fisher and the interior???
Kurt S
CRG

67jeffreyt

  • Member
  • ***
  • Posts: 200
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #18 on: February 23, 2017, 03:15:49 AM »
A different car but I had a 1983 Chevy malibu wagon and under the back seat I had 2 sheets, one for the wagon and another for a brown v6 El Camino, I assumed it was for the car before my wagon and they just threw it in my wagon on the assembly line
67 ss/rs camaro currently
68 prostreet Camaro 9.60 1/4 mile
68 Rallysport, first car high school
89 rs camaro convertible, made readers rides super Chevy

BULLITT65

  • Hero Member
  • *****
  • Posts: 4476
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #19 on: February 23, 2017, 03:21:03 AM »
under the back seat may be a good spot to look.
Did you not see what William posted about Fisher and the interior???

Sure, but you have to acknowledge the ones that have been found, right????

So the procedure was to toss them. Was this followed 100% of the time, no.

I guess like other some other procedures that were laid out by Chevrolet, this was not followed 100% of time by the employees , so broadcast copies have been found by different owners, or been given to them by the dealer ( which would mean they would have been located outside the garbage can as well). :)
1969 garnet red Z/28 46k mile unrestored X77
-Looking for 3192477 (front) spiral shocks 3192851 (rear)
-Looking for an original LOF soft ray windshield
-Looking for original Delco side post negative battery cable part # 6297651AV

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5884
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #20 on: February 23, 2017, 04:17:06 AM »
No, I do not acknowledge that any broadcast sheets have been found in the rear seats of a 67-9 Camaro.
Kurt S
CRG

BULLITT65

  • Hero Member
  • *****
  • Posts: 4476
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #21 on: February 23, 2017, 04:22:23 AM »
Um, that wasn't the question....
1969 garnet red Z/28 46k mile unrestored X77
-Looking for 3192477 (front) spiral shocks 3192851 (rear)
-Looking for an original LOF soft ray windshield
-Looking for original Delco side post negative battery cable part # 6297651AV

william

  • CRG Member
  • *****
  • Posts: 3119
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #22 on: February 23, 2017, 04:23:42 AM »
Quote
Sure, but you have to acknowledge the ones that have been found, right????

I have no idea what finding a build sheet in any of the cars mentioned has to do with finding one in a 67-69 Camaro built at the Norwood, OH assembly plant.

As noted several times, the seating and upholstery panels were installed by Fisher Body. Fisher Body had no use for them, never saw them because they didn't exist when the body was being assembled. That's why they are not behind door panels or under the rear seat.

Ever consider an evening class in reading comprehension?
Learning more and more about less and less...

BULLITT65

  • Hero Member
  • *****
  • Posts: 4476
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #23 on: February 23, 2017, 04:35:02 AM »
So there was no way they could make out of the factory into anyones hands, yet they exist.

When I say under the rear seat, does that mean they couldn't have been on the floor where the carpet stops? (like they were discarded on the floor, not tucked into the rear seat)

Sorry,  I thought english was your first language.
1969 garnet red Z/28 46k mile unrestored X77
-Looking for 3192477 (front) spiral shocks 3192851 (rear)
-Looking for an original LOF soft ray windshield
-Looking for original Delco side post negative battery cable part # 6297651AV

cook_dw

  • Hero Member
  • *****
  • Posts: 3981
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #24 on: February 23, 2017, 12:44:47 PM »
Austin, Fisher body never had broadcast sheets..  That was a Chevrolet side thing only.  By the time the sheets were put in or on the car the interior carpet and rear seat were installed..  There MIGHT be a slim chance of finding a UOIT (Uniform Option Identification Tag),  but that isnt the same as a "buildsheet".  Usually the likely reason in an owner receiving buildsheet is either it was thrown inside the car and during dealer prep of the new car it was added it to their new cars folder (like rare396bronze mentioned) or there was one that happened to have been found under the hood insulation on a deluxe interior car IIRC but that is most likely a miss by the assembly line worker before the installation of said insulation and probably a one and a million occurrence.

Read the link William posted.  It explains all of that.

jdv69z

  • Hero Member
  • *****
  • Posts: 1275
  • 69 RS Z/28 52E
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #25 on: February 23, 2017, 02:45:06 PM »
Guess I started all this.  :o  Kurt, just because I'm curious, approx how many Norwood built 67-69 Camaro broadcast copies have you seen during your years of Camaro research?
Jimmy V.

william

  • CRG Member
  • *****
  • Posts: 3119
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #26 on: February 23, 2017, 03:38:43 PM »
So there was no way they could make out of the factory into anyones hands, yet they exist.

This was in my first post and explained that since I have one, I'm well aware BCs made it out of the factory. How you gleaned that out of this thread I have no idea.

I have a real one [not a copy] that was in the folder with other paperwork from the cars' delivery. Sometimes they were retained during new car prep, most often discarded. They were generated by Chevrolet when the assembled body was in queue for release to final assembly.

Apparently that wasn't clear enough for you so I posted it again.

The Gibb ZL1 BCs exist because they were left inside the car and he saved them. Apparently that was common but most dealers discarded them during prep.

Still not getting it, Kurt posted the same thing for a third time:

Dealers either discarded the copies in the car or put them in the dealership's new car file.

A good rule is that when you're in a hole, stop digging.
Learning more and more about less and less...

m22mike

  • Member
  • ***
  • Posts: 286
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #27 on: February 23, 2017, 04:02:56 PM »
A good rule is that when you're in a hole, stop digging.

Good one William :>) I think you and Kurt have went above and beyond trying to explain this.

When asked about these first gen Norwood body broadcast sheets by local guys, I tell them don't even bother looking !

Mike
X66 L78 M22 4.10 Deluxe Threads, PNT 10/10, Red Hockey stripe

fsc66

  • Member
  • ***
  • Posts: 314
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #28 on: February 23, 2017, 05:46:32 PM »
Scroll down through this thread a Team Camaro's forum for some more info:
http://www.camaros.net/forums/15-tag-team/162039-norwood-build-sheet.html

Paul

Kelley W King

  • Hero Member
  • *****
  • Posts: 1410
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #29 on: February 23, 2017, 07:47:27 PM »
For what it is worth I found what the mice left of my 77 Trans Am firebirds under the rear seat. Mostly confetti but enough to know what it was. The little rascals carcass was there also.
69 Z28 RS Scuncio Hi Performance
69 SS L78
67 SS Chevelle
64 Corvette
66 GTO Tiger Gold
77 Trans Am Special Edition

jdv69z

  • Hero Member
  • *****
  • Posts: 1275
  • 69 RS Z/28 52E
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #30 on: February 23, 2017, 07:51:03 PM »
Thanks, I get the picture. Or should I say the virtual non-existence there of?  :D
Jimmy V.

Hans L

  • Member
  • ***
  • Posts: 380
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #31 on: February 23, 2017, 09:30:38 PM »
I know the thread focused on NOR cars, but do we have any idea how often the Chassis Broadcast Copy has been found on first gen LA/VAN Nuys built Camaros?
https://www.instagram.com/69camarorsz28/
'69 Camaro RS Z/28 Van Nuys Built
'69 Chevelle SS 396 4 Speed

bcmiller

  • CRG Member
  • *****
  • Posts: 4014
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #32 on: February 23, 2017, 10:38:53 PM »
Bottom line, finding a CBC or BBC from a First Generation Camaro from the Norwood plant is rare.

I helped part out quite a few cars from the mid 70s to early 90s. Some were wrecked fairly early in their life. I never found any.

Different story on Chevelles and full size cars. But its like comparing apples and oranges.


Bryon / 1968 Camaro SS 396 coupe - now old school 468 big block
1967 Camaro RS/SS 396 coupe L35/M40 - 4 generation family project
Looking for 68 Camaro with body # NOR 181016

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5884
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #33 on: February 24, 2017, 06:24:10 AM »
Guess I started all this.  :o  Kurt, just because I'm curious, approx how many Norwood built 67-69 Camaro broadcast copies have you seen during your years of Camaro research?
Excluding 69 LOS chassis sheets (commonly found on the gas tank) - a little over 150. Body sheets are much more common than chassis sheets.
Kurt S
CRG

william

  • CRG Member
  • *****
  • Posts: 3119
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #34 on: February 24, 2017, 04:31:30 PM »
I went through our NOR db and unofficially came up with 133 entries showing a BC. 112 were BBC only; 5 were CBC only, 16 had both. Norwood produced 551,354 1st gens so that's not very many.

My guess, about 90% of those exist because the dealer retained it. A friends' family had a Chevy dealership 1953-1985 and he stated it was common to find production paperwork in cars at delivery. I have several folders from the few '60s Corvettes they sold and there are some unusual docs in them. 
Learning more and more about less and less...

JohnZ

  • CRG Member
  • *****
  • Posts: 4365
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #35 on: February 24, 2017, 07:03:00 PM »
There's another possible aspect to the "Broadcast Copy under the rear seat story" , but not on first-gen NOR cars. Norwood was an old Fisher/Chevrolet plant, and followed the same overall sequence as all the other Fisher/Chevrolet plants, where Fisher supplied a painted and trimmed firewall-back body shell to Chevrolet and Chevrolet made a car out of it.

GMAD plants, however, weren't constrained by Fisher traditions, and used the "soft trim after Final" sequence, where all of the interior soft trim parts were installed AFTER roll-test and water-test as a driveable car (Corvette also followed that sequence); easier to spot water leaks and no water damage to costly interior parts. At some point after GMAD absorbed Norwood (don't recall when offhand), Norwood changed to the GMAD sequence, and that system would have made it possible to find a Broadcast Sheet under the rear seat.
'69 Z/28
Fathom Green
CRG

rare396bronze

  • Member
  • ***
  • Posts: 281
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #36 on: February 25, 2017, 04:17:37 AM »
I agree on 67-69 Norwood cars good luck trying finding a build sheet. But 70 up you have better shot. A good friend told me were to find my 80 z-28 build sheet also had a 80z found his sheet in under his rear seat. To top that off he also had 70-73 z28's. Out off the 4 cars he found 3 cars with build sheet's under the rear seats. The 70z28 had a m22 transmission code on the build sheet. The 72 z28 had two sheets for two different cars one was for the next vin after his. I sold my 80z28 years ago and let the next owner have it. But kept a copy for me. So I say out off 6 cars finding 5 cars with build sheet that is pretty good odds.
« Last Edit: February 28, 2017, 04:20:29 AM by KurtS »

z28z11

  • Hero Member
  • *****
  • Posts: 1853
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #37 on: February 25, 2017, 04:30:06 AM »
Somewhere north of 83.3% - not bad at all -

Steve
1968 Z28 M21/U17 BRG/W 1967 Chevy ll Nova SS 
1969 Z28 X77/M20/VE3 LeMans/W
1969 L78 X66/N66 Cortez/BVT
1969 Z11 L48/M35/C60/C06  1949 3100 5wd 235/6

HustleRussell

  • Member
  • ***
  • Posts: 233
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #38 on: February 26, 2017, 01:32:15 AM »
I dropped the fuel tank on my 05c Norwood 68 rs last summer to repair pin holes and there was a piece of paper attached to the upper side under one of those tar strips. It was degraded so bad I threw it away. Couldn't make out anything. Now I'm thinking I should have hung onto it. Anyway some of the paper is still attached to the tank, and it's still leaking so next time I drop tank I'll post some pics.
Russ 
68 RS
69 SS


BULLITT65

  • Hero Member
  • *****
  • Posts: 4476
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #40 on: February 26, 2017, 04:42:29 PM »
I knew I would find one somewhere.... :P

Everyone produces everything these days...
1969 garnet red Z/28 46k mile unrestored X77
-Looking for 3192477 (front) spiral shocks 3192851 (rear)
-Looking for an original LOF soft ray windshield
-Looking for original Delco side post negative battery cable part # 6297651AV

JKZ27

  • Hero Member
  • *****
  • Posts: 559
    • View Profile
John
69 RS/SS Cortez Silver, L48 MC1
68 RS Ash/Ivy Gold 327EFI M20


69Z28-RS

  • Hero Member
  • *****
  • Posts: 5778
  • owner since 4-Apr-1976
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #43 on: February 26, 2017, 07:16:49 PM »
that's kinda like what I decided (after awhile) about the logic of 'drag racing'...  :) ...

'sorta like getting drunk...  burying all your $$$... then not remembering where after you sobered up~! " 

:)
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

BULLITT65

  • Hero Member
  • *****
  • Posts: 4476
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #44 on: February 26, 2017, 08:27:36 PM »
Well it's like everything else for these cars, some items are worth more to some people. I am not interested in purchasing a build sheet or window stickers , but I am sure they sell enough of both to other people. Enough so, that multiple guys produce the window stickers. I am sure I have over paid on other items for my car, I just think they were more functional type parts.
1969 garnet red Z/28 46k mile unrestored X77
-Looking for 3192477 (front) spiral shocks 3192851 (rear)
-Looking for an original LOF soft ray windshield
-Looking for original Delco side post negative battery cable part # 6297651AV

rare396bronze

  • Member
  • ***
  • Posts: 281
    • View Profile
Re: Chassis Broadcast Sheet
« Reply #45 on: February 27, 2017, 04:27:11 AM »
I agree I don't want any fake build sheet. I have my  dealer invoice, mso  & shipping report. Also my post #36 it should read 67-69 if somebody can change it for me. Thanks.

 

anything