Author Topic: 69 power steering hose sleeves  (Read 10539 times)

Danzo

  • Member
  • ***
  • Posts: 474
    • View Profile
69 power steering hose sleeves
« on: February 21, 2016, 02:54:23 AM »
Has anyone found a good replacement for these sleeves? Thanks in advance.

Spooky

  • Member
  • ***
  • Posts: 90
    • View Profile
Re: 69 power steering hose sleeves
« Reply #1 on: February 21, 2016, 02:37:14 PM »
I am working on getting some made. I should have a few test pieces in a week or so.

Scott

169INDY

  • Hero Member
  • *****
  • Posts: 1794
    • View Profile
Re: 69 power steering hose sleeves
« Reply #2 on: February 21, 2016, 03:22:17 PM »
I used armaflex pipe insulation I will have to look in my notes for a part number.
Jim
68 SS/RS L35 Th-400 LOS
69 Pace Car L48 Th-350 LOS
68 Z28 M21 LOS

Spooky

  • Member
  • ***
  • Posts: 90
    • View Profile
Re: 69 power steering hose sleeves
« Reply #3 on: February 21, 2016, 03:29:32 PM »
I looked into armaflex too, but it is to thick IMHO. I want something closer to original.

169INDY

  • Hero Member
  • *****
  • Posts: 1794
    • View Profile
Re: 69 power steering hose sleeves
« Reply #4 on: February 21, 2016, 04:07:24 PM »
What is the thickness of the Original, both of my power steering cars had soaked, crumbling orig insulation that was nasty and have since been replaced.
Jim
68 SS/RS L35 Th-400 LOS
69 Pace Car L48 Th-350 LOS
68 Z28 M21 LOS

ko-lek-tor

  • Hero Member
  • *****
  • Posts: 1858
  • someday I'll get one finished
    • View Profile
Re: 69 power steering hose sleeves
« Reply #5 on: February 21, 2016, 05:42:07 PM »
I would like to confirm, maybe through some of our sites survivor cars the answer lies, but did both hoses get a sleeve? My car has a sleeve only on the pressure hose. This is a 69 specific question,BTW.
Bentley to friends :1969 SS/RS 396 owned 79
1969 SS 350 (sold)
1969 D.H.COPO replica 4spd. owned since 85
1967 302 4 spd 5.13

Spooky

  • Member
  • ***
  • Posts: 90
    • View Profile
Re: 69 power steering hose sleeves
« Reply #6 on: February 21, 2016, 07:33:44 PM »
Bentley, could you send me a pic of your p/s hose? Maybe measure the length? The sleeve on mine is about 10 inches but the return looks to be a replacement so I have no idea if it has/needs one.

Scott

Danzo

  • Member
  • ***
  • Posts: 474
    • View Profile
Re: 69 power steering hose sleeves
« Reply #7 on: February 21, 2016, 08:09:32 PM »
Both must have had them as I only have one remaining on the return hose.

Camarocards

  • Member
  • ***
  • Posts: 243
    • View Profile
Re: 69 power steering hose sleeves
« Reply #8 on: February 22, 2016, 12:13:26 AM »
I seem to recall someone using the sleeve that Mustangs used. I have no clue whether or not it's correct or even close but thought I would share nonetheless.

http://www.cjponyparts.com/power-steering-hose-protector-sleeve-20/p/PSHPS/

Bob
Bob
'68 SS L35 01D

Boston14

  • Member
  • ***
  • Posts: 252
    • View Profile
Re: 69 power steering hose sleeves
« Reply #9 on: February 23, 2016, 02:50:29 PM »
I found a replacement hose cover, and they look pretty good, matched original covers really well.  I found them at Virginia Classic Mustang.com

http://www.virginiaclassicmustang.com/Search.aspx?k=SU1181.
Here's a picture before drivetrain was installed. 

boston14

1969 SS/RS 350 Convertible
Dover White with Black Top and D90 stripe, Red Standard Interior

Boston14

  • Member
  • ***
  • Posts: 252
    • View Profile
Re: 69 power steering hose sleeves
« Reply #10 on: February 23, 2016, 02:54:40 PM »
And yes both of my original hoses had covers on them though badly deteriorated.
boston14

1969 SS/RS 350 Convertible
Dover White with Black Top and D90 stripe, Red Standard Interior

Rich69s

  • Member
  • ***
  • Posts: 31
  • Two years in the making
    • View Profile
Re: 69 power steering hose sleeves
« Reply #11 on: February 25, 2016, 02:54:26 AM »
Thanks ,I just ordered 2 hoses from virginamustang and there was on shipping on my order!
1969 L 48 SS Frost Green taken apart in 1979 resurrection forthcoming
1969  Yenko  Purchased 1981 with my student loan check

X33RS

  • Hero Member
  • *****
  • Posts: 1092
    • View Profile
Re: 69 power steering hose sleeves
« Reply #12 on: February 25, 2016, 03:40:37 AM »
I usually get them from NPD.  Comes in a 20" length for same price $19.95, you just cut in in half and good to go.   NPD calls them a sleeve, part number 3B713-1A

Spooky

  • Member
  • ***
  • Posts: 90
    • View Profile
Re: 69 power steering hose sleeves
« Reply #13 on: February 25, 2016, 11:15:14 PM »
I just got my test pieces in. We just installed on a new hose. I think it looks really good!







what do you guys think?

Scott

Spooky

  • Member
  • ***
  • Posts: 90
    • View Profile
Re: 69 power steering hose sleeves
« Reply #14 on: February 25, 2016, 11:22:30 PM »

 

anything