Author Topic: rear brakeline  (Read 5357 times)

janobyte

  • Hero Member
  • *****
  • Posts: 1531
  • Before it was called Day 2 !
    • View Profile
rear brakeline
« on: March 15, 2015, 11:07:08 PM »
looking for pics of 68 rear hard line to flex line ( from sub frame to bracket)  my rear floor pan has 2 clip assemblies. seeing 1 in the build manual. Also bends appear different? Original to car , never repaired or spliced. Single line from engine compartment. thanks.
68 Z/28  born with: 302, drive line, etc..

68camaroz28

  • Hero Member
  • *****
  • Posts: 2232
    • View Profile
Re: rear brakeline
« Reply #1 on: March 17, 2015, 11:13:11 AM »
As promised I sent you a couple pictures via email I took Monday afternoon while working on car.
Chick
68 Z/28 NOR 01B Orig motor/trans/rear
69 Z/28 NOR 07A Orig Block & GM Cross-ram/carbs
69 L34 Rest. Nova Father/Son Car
69 L78 Surv Nova Purch 4/69 31K miles
67 L89 Corv Tribute
68 Corv 427/400 Orig motor
07 Corv Z06
R 68Z build- http://www.camaros.net/forums/showthread.php?t=182584

janobyte

  • Hero Member
  • *****
  • Posts: 1531
  • Before it was called Day 2 !
    • View Profile
Re: rear brakeline
« Reply #2 on: March 17, 2015, 02:12:03 PM »
thanks, sent a PM.
68 Z/28  born with: 302, drive line, etc..

dannystarr

  • Hero Member
  • *****
  • Posts: 1745
    • View Profile
Re: rear brakeline
« Reply #3 on: March 17, 2015, 04:56:15 PM »
Are you talking about the line right near the tank? I always wondered why they couldn't come up with a better set-up, as that hose sure is close. If you need more pic's LMK...

janobyte

  • Hero Member
  • *****
  • Posts: 1531
  • Before it was called Day 2 !
    • View Profile
Re: rear brakeline
« Reply #4 on: March 17, 2015, 05:15:29 PM »
off the rear sub frame--under body ( 2 clips) to the junction. (at bracket hard to flex line)   When I was "playing with it", the line got bent , not kinked luckily. Not a hard fix, but I need reference for the correct bends.  Waaay off right now.
68 Z/28  born with: 302, drive line, etc..