Author Topic: Sticky speedo  (Read 4395 times)

Mark's 68 L78 RS SS

  • Member
  • ***
  • Posts: 117
    • View Profile
Sticky speedo
« on: October 12, 2006, 07:11:23 AM »
Hi guys:

My speedo is sticking and not reading the right speed.  Any special tricks to replacing the cable?  I see there are several lengths available so I will need to research which one is correct for a 68 L78 with M22.

Thanks in advance for any advice.

Mark
Mark
Skaneateles, NY
68 L78 RS SS M22

lakeholme

  • Hero Member
  • *****
  • Posts: 2497
  • 68-12D L30/M35
    • View Profile
Re: Sticky speedo
« Reply #1 on: October 12, 2006, 01:50:56 PM »
Are you sure you just don't need to lubricate the speedo cable.  A year or so ago, the speedometer on my 68 buzzed and jumped around.  A little lubrication and it's worked fine since.  Your local parts store should have the lubricant (It's got graphite in it... although some folks swear by white grease and a low viscosity oil combination.)  The point is you will have the cable out as it is, so if it looks dry, try the cheap fix first. 

Phillip, HNR & NCR-AACA, Senior Master, Team Captain, Admin.,
Spring Southeastern Nationals chair, AACA National Director

Mark's 68 L78 RS SS

  • Member
  • ***
  • Posts: 117
    • View Profile
Re: Sticky speedo
« Reply #2 on: October 12, 2006, 08:46:44 PM »
Philliip:

You make a good point and we already lubed it once.  i will check to make sure we did it good but I am thinking I will just replace it.  They are not too expensive and it will just eliminate the problem.

Mark
Mark
Skaneateles, NY
68 L78 RS SS M22

 

anything