Hey guys, I am now in the process of restoring my RS headlight vacuum hoses. I am looking for some help in deciding to try to clean up and restore my hoses, or to buy reproduction. The reproduction hoses I have seen have several problems with them. First, the large size hoses only have 3 ribs on them not 5 like my originals. Second, the diameters are off. They are a bit small. My original check valve has Trico logo on it and the filter has AC on it. I have found the AC filters, but not the Trico check valve. The reproduction tie straps used on the hoses do not have enough lock ridges on them and are too hard (my originals are softer, almost rubbery). The reproduction straps also have an extra knob on them about an inch or so from the slotted end. These incorrect straps appear to be the same as the ones AMK sells. Now for the questions. First, does anyone make a hose set that is like the originals (or very close). Second, I am posting a picture of my hoses, are they able to be restored? If so, what process is needed to bring them back to life? Thanks for listening, any help will be greatly appreciated.